Bids Are Invited For Price Registration For Futura And Eventual Hiring Of A Specialized Company For The Installment Of Personal Protective Equipment (Ppe), According To Requests Made By The Municipal Secretariats

Bc 4Kg Extinguisher Refill - Extincer Record Bc 4Kg, Abc 6Kg Extinguisher Recharge - Extinguer Recorge 6Kg, Extinguer Recorge Pqs 6 Kg - Extinguer Recorge Pqs 6 Kg, Extinguer Recarge Pqs 4 Kg - Extincer Recorge Pqs 4 Kg, Gari Waste Collection - Gari - Approximately 100 Liters, Height Of Approximately 1, 1 Meters, Produced In Steel, 30/05/2025, Double Safety Talabarte, Type Y - Safety Talabartis Specifications: Double Type Y, Power Absorber, Elastic Talabar And Dual Carabout With 110 Mm Opening Lock With 110 Mm At Both Ends 1 Dual -Stainless Action Carabine With 18Mm Opening. For Climbing Of Places That Do Not Have A Permanently Installed Lifeline. Applicable Standardization: Nbr 11370 And 14628/2000. With C.A Valid By The Mte., Air Purifier Respirator Type Type Piece Filter - Air Purifier Respirator Type Type Particle Filter Pff2 Particle. With Side Valve. Minimal Descriptions: Air Purifying Respirator Type Particle Filtering Particle, Class Pff-2 (S), With A Folding Type, Gray, With Thermal Welding In Its Perimeter. The Respirator Is Basically Composed Of Two Noded Panels And A Filter Medium In Synthetic Microfibers Treated Electrostatically. The Outer Face Of The Respirator Is Covered By A Gray-Colored Non-Metal That Protects The Filter Medium, Preventing Microfibers From Release. The Inner Face Is Covered By A White Non-White For The Same Purpose. On The Sides Of The Piece, 04 (Four) Metal Staples Are Fixed, Two On Each Side, Where The Ends Of 02 (Two) Elastic Tiers Pass In White. The Upper External Part Of The Part Has A Moldable Metal Strip Used For Nasal Adjustment, Which Gives The Respirator Facial Sealing. This Equipment Must Present The Inmetro Marking Seal. Single Size. With C.A Valid By Mte., Safety Leggings Made In Two Layers Of Lami - Safety Leggings Made In Two Layers Of Pvc Laminate, Three Steel Splints Or Three Polypropylene Splints Or Steel Plate At The Front, With Or Without Polypropylene Protection In The Knee Trapped By Electronic Welding And Plastic Loop For Adjustments, With Or Without Metatars, Bias In Synthetic Material, Total Velcro Closure With Adjustment Tape At The Rear. Total Velcro Closure .. With Valid Mte. (Par), Frame Glasses With Frame And Vision Made On Um - Safety With Frame And Vision Made In A Single Plant Polycarbonate, With Nasal Support Injected By The Same Part And Steps Tie Material Type And Articulated By Metal Screws, Antiryrisc Treatment Lens With Antiembacting Eye Protection Agreement C.A Front Steering Wheels Valid Mte, Frame -Frame Safety Glasses And Light Gray Vision - Frame Safety Glasses And View Made In A Single Piece Of Light Gray Polycarbonate, Anti -Terminated Anti -Tattered Lenses, Protect Against Uva And Uvb Rays. Eye Protection Against Frontal Particle Impacts With C.A Valid Mte., Scrape Safety Sleeve, Scrape Strips - Safety Sleeve Made Of Scrape, Scrape Strips And Adjustment Buckles. Arm Protection And Ahead