Bids Are Invited For Alienation Of 20 Lots Of Assets Considered Unusable.

Conversion - Mobile, Complement: Description Arm Training Chair, Scanning Clipboard And Book Door 1 - Destination: For Setran/Gab. 2 - Description: Training Chair With Arm, Clipboard And Book Holder. Material: Seat And Backrest Structure: Pressed Multilâmine Seat And Backweat With Resin Glue To The Anatomically Molded Urea, Within The Nr -17 - Ergonomics, At Least 7Mm Thick For The Back And At Least 10 Mm Thick For The Seat. At Least 350 Mm Of The Left And Minimum 230 Mm Backrest Height Of The Seat At Least 400 Mm And At Least 380 Mm Depth Of The Backrest And Seat With Protective Cover In Polypropylene Or Black Vacuum Forming. Link Between Backrest Per Tubular Steel Arm If Oval Section In The Shape Of ¨T ¨ Reinforced With Steel Soul On The Curve And Flexible Rubber Cushion Flexible Coxins. Screw Screw Fixation System, Through The Grabbing Métal Nut In The Wood. The Seat Must Have, Throughout Its Outline, A Semi-Rigid Black Pvc Profile To Protect Against Beats. Upholstery: It Should Be Injected Polyurethane Foam At Least 40 Mm Thick, Anatomically Molded And Controlled Density, In Vinyl Lined In High Strength Cotton Fabric And Minimum Thickness Of 0, 9 Mm In Blue Color. Base: The Seat Should Be Restrained Over Two Steel Platters At Minimum 2, 5 Mm Thick, Front And Rear, Where The Structure Of The Round Tube Steel Of At Least 19 Mm Should Be Fixed. On The Platters, A Steel Plate Of At Least 2 Should Be Fixed, Measuring At Least 150 X 200 Mm, Where The Backrest Rod Should Be Fixed. The Feet Should Be Endowed With Self-Articulavings With Steel Pin Or Naylon And Naylon Shoe. Arms :: In Integral Polyurethane Foam With Steel Soul. Scale Clip, Chair, Type/Model: Fixed, Arm: No, Seat [Character]: Where The Structure Of The Steel Feet Of All Round Section At Least 18 Mm Should Be Fixed, Structure Of The Feet: Should Be Equipped With Self-A-Articulable Slips With Steel And Nylon Shoe, Two Steel Seal Support Thickness, Screw Setting System With Thread: Through The Sticked Metal Claw Nig, Foam Seat/Backrest [Type]: Injected Polyurethane Measurement Anatomically With Controlled Density, Thickness Wood Back Min [Mm]: 5, Thickness Foam Seat/Backrest [Mm]: 40, Thickness Coating Of The Seat/Backrest Foam Min [Mm]: 0, 9, Coating Foam Seat/Backrest [Material]: Vinyl Lined In High Strength Cotton Fabric, Foam Coating/Backrest [Color]: Black, Metal Parts [Type]: Epoxy-Pipo, Oven Polymerization At At Least 180, Epoxy-Pipo [Color]: Metal Parts [Type]: Electrostatically, Bath, Bath Hot Degreaching, Immersion Minimum Temperature 120, Phosphate Bath, Painting Surface Preparation: To Receive Epoxi Painting Black Powder With Greenhouse Polymerization At A Minimum Of 180 ° Centigrated, Base Casters [Type]: Self-Articulable Slips, Against Polypropylene Seat/Back Cover, Against Cover Seat/Color, Black, Black, Black, Output Backrest: A Semi-Rigid Black Pvc Profile For Protection Against Beats, Height Back Min [Mm]: 250, Mining Seat Width [Mm]: 400, La