Request For Quotation Government Purchases (Drying, Laboratory Table, Wall-Mounted Laboratory Equipment, Laboratory Chair, Laboratory Chair)

St Rk 3404-2019. Wall Dryer Is Designed For Drying Laboratory Utensils On Pegs, Attached To The Wall. The Color Of The Dryer Is Monophonic Light Gray. Material - Metal Or Fluoroplast. Plastic Pegs. Drywall Size (D*B): 1000*600Mm. The Number Of Pegs Is At Least 30, The Distance For Large And Small Dishes. The Year Of Release Was No Earlier Than 2023. A Guarantee Of At Least 12 Months. The Supply Includes: The Supply And Unloading Of Goods At The Customer’S Warehouse At The Expense Of The Supplier Forces, To The Place Of The Laboratory And The Assembly. Mandatory Should Be Accompanied By A Package Of Documents From The Manufacturer (In The State And Russian Languages). Abay, St Rk 3404-2019. Laboratory Table: Overall Dimensions: Width: At Least 1200 Mm, Depth: At Least 550 Mm, Height: At Least 750 Mm. Frame: A Strong Metal Welded Frame From A Square Section Of 25X25 Mm, Wall Thickness 1.2 Mm. To Enhance The Frame At A Distance Of 100 Mm From The Floor, An Additional Strapping Is Provided From A Square Section Of 25X25x1.2 Mm. Inoperative Surfaces Are Made Of Sheet Steel With A Thickness Of Not More Than 0.7 Mm. Inoperative Surfaces (Side Walls, Doors, Boxes) Are Made Of Sheet Steel With A Thickness Of Not More Than 0.7 Mm. The Coverage Of The Frame And Non -Working Surfaces Should Have Universal Resistance To Chemicals And Mechanical Influences, Absolute Non -Combustibility And High Heat Resistance, Resistant To Damage And Corrosion. Color: Light Gray. Harvester: Icing Porcelain Stone Slab. The Countertop Should Have Universal Resistance To Chemicals And Mechanical Influences, Absolute Non -Combustibility And High Heat Resistance, Resistant To Damage And Corrosion. Color: Light Gray. Complex: Under The Countertop There Are 2 Boxes Of Complete Extension On Roller Guides, With Protection Against Accidental Loss. Adjustable Supports For Smoothing The Floor Irregularities (Adjustment Progress Of At Least 30 Mm), Providing Horizontal Position. Distributed Load On The Table - Up To 150 Kg. All Surfaces Are Smooth, Without Scratches And Chips, Without Protruding Sharp Fasteners (In Order To Exclude The Possibility Of Trauma To Personnel) And Deepening From Self -Tapping Screws, Leaky Joints And Seams (For The Effectiveness Of Disinfection). The Supply Includes: The Supply And Unloading Of Goods At The Customer’S Warehouse At The Expense Of The Supplier Forces, To The Place Of The Laboratory And The Assembly. Additionally: (Model, Color, Accessories, Fasteners, Components) Should Be Agreed With The Customer. Mandatory Should Be Accompanied By A Package Of Documents From The Manufacturer (In The State And Russian Languages). Abay, St Rk 3428-2019. Laboratory Chair. Laboratory Stool On Wheels (Roller Supports), Without A Back Is Round, With A Supporting Ring (Metal Chrome Metal), Height Adjustment With A Gas-Lift (Height 510-660 Mm), A Leather Seat Made Of Light Gray. The Supporting Chrome Ring Should Be Located At The Lower Base Of The Chair. The Frame Of The Chair Should Be Made Of Chrome Steel. The Year Of Release Was No Earlier Than 2023. A Guarantee Of At Least 12 Months. The Supply Includes: The Supply And Unloading Of Goods At The Customer’S Warehouse At The Expense Of The Supplier Forces, To The Place Of The Laboratory And The Assembly. Additionally: (Model, Color, Accessories, Fasteners, Components) Should Be Agreed With The Customer. Mandatory Should Be Accompanied By A Package Of Documents From The Manufacturer (In The State And Russian Languages). Abay, St Rk 3404-2019. The Table For Laboratory Equipment Is Fasting. The Design Of The Table Is A Whole-Welded Frame From A Steel Pipe Of Various Crossings Covered With Polymer Powder Paint Of Light Gray Color. The Design Of The Table Allows You To Withstand Large Loads (At Least 100 Kg). The Back Panel Of The Table Is Equipped With Two Spray -Free Sockets Installed Above The Countertop. The Legs Of The Tables Are Equipped With An Adjustable Support (0-30 Mm) To Compensate For The Irregularities Of The Floors. The Size Of The Table Is Not Less (D*G*C) 1200*600*900 Mm. For Isolation From Mechanical Fluctuations, The Dampers Between The Countertop And The Base Of The Table Must Be Installed. The Table Should Be Equipped With A Rolling Table With Sliding Shelves, The Upper Shelf Is Locked On The Lock (The Color Of The Countertop Is A Plain Light Gray). The Countertop Is A Whole Coating, Without Seams, The Edges Of The Countertop Is Moisture -Proof Without A Gap. The Countertop Is A Non -Hygroscopic, Non -Combustible, Chemically Resistant In Contact With Most Types Of Chemical Reagents, Acids, Alkalis And Solvents. It Withstands The Exposure To Temperatures Up To 150 ºс. The Supply Includes: The Supply And Unloading Of Goods At The Customer’S Warehouse At The Expense Of The Supplier Forces, To The Place Of The Laboratory And The Assembly. Additionally: (Model, Color, Accessories, Fasteners, Components) Should Be Agreed With The Customer. Mandatory Should Be Accompanied By A Package Of Documents From The Manufacturer (In The State And Russian Languages). Abay, St Rk 3404-2019. The Table-Musical Table 1 Sectional With Two Swing Doors Without Shelves And A Lock, Is Operated Under The Conditions Of Aggressive Media And High Humidity, Designed To Work With Water, Washing Dishes, Draining The Exhaust Reagents. The Design Of The Washing Is A Coating With A Polyginite-Sized Light-Gray With A Pod-Colored-Gray Color (Dhghhv). 800X900 Mm Are Equipped With An Adjustable Support (0-30 Mm) To Compensate For Floors: A Strong Metal Frame From A Square Of A Square Section Of At Least 25X25 Mm, The Wall Thickness Is At Least 1.2 Mm, The Door Is Made Of At Least 1.2 Mm Sheet. Porcelain (Acidic) Stable Material, And A Stainless Steel Washing. Polypropylene. From Bronze And Covered With Epoxy Paint, Which Makes The Crane Suitable For Work In A Laboratory. The Handle Of The Crane Is An Elbow Discovery. The Year Of Release Was No Earlier Than 2023. A Guarantee Of At Least 12 Months. The Supply Includes: The Supply And Unloading Of Goods At The Customer’S Warehouse At The Expense Of The Supplier Forces, To The Place Of The Laboratory And The Assembly. Additionally: (Model, Color, Accessories, Fasteners, Components) Should Be Agreed With The Customer. Mandatory Should Be Accompanied By A Package Of Documents From The Manufacturer (In The State And Russian Languages). Abay