The Milling Cutter Is Spherical. Two Cutting Spiral Blades. The Output Of The Chips Up. Application: Used For Cutting, Copying, Formatting Panels And Any Other Routed Wood Transactions, Wooden Materials, Various Plastics And Laminates. It Can Be Used At Processing Centers With Cnc, As Well As On Manual Power Tools. 1998.032.080.08R Frez Spherical Vhm D = S = 8 I = 32 L = 80 Rh Z2. Gost 16463-2016, Carbated Conical Fireflance 2 Arrival. The Conical Mill Is Used To Process Deep Reliefs Without Black Processing. Due To The Shape Of The Cone, The Cutter Has High Strength With A Small Diameter Of The Tip Of The Working Surface Of The Cutter. The Milling Cutter Is Made Of Hrc55 Tungsten Carbide With Altin. The Diameter Of The Working Surface Is From 0.2 To 8 Mm. Processed Material Wood, Mdf, Plastic. Great For 3D Processing. Conical 75X30.5X6 R = 0.25 Dtc1. Gost 16463-2016, The Milling Cutter Is Spiral. Distinctive Features: One Cutting Spiral Z1 Conclusion Of Chips Upwards: Used For Cutting, Copying, Formatting Panels And Any Other Routed Wood Transactions, Wooden Materials, Various Plastics And Laminates. It Can Be Used At Processing Centers With Cnc, As Well As On Manual Power Tools. 198.04.015.050.04R Spiral Cutter Vhm D = 4 I = 15 L = 50 Rh Z1 (Positive), Gost 16463-2016, Carbated Conical Fireflance 2 Arrival. The Conical Mill Is Used To Process Deep Reliefs Without Black Processing. Due To The Shape Of The Cone, The Cutter Has High Strength With A Small Diameter Of The Tip Of The Working Surface Of The Cutter. The Milling Cutter Is Made Of Hrc55 Tungsten Carbide With Altin. The Diameter Of The Working Surface Is From 0.2 To 8 Mm. Processed Material Wood, Mdf, Plastic. Great For 3D Processing. Conicular 6X30.5X75 R = 0.75 Dtc3. Gost 16463-2016, The Circle Is Diamond. The Diameter Of The Disk Is 350 Mm, The Planting Diameter Is 25.4 Mm, The Thickness Of The Diamond Layer Is 3.2 Mm, Cooling - The Use Of Water / Without The Use Of Water, The Height Of The Diamond Layer - 9 Mm, The Amount Of Sigmes - 21, The Type Of Disk - Segment, Cutting - Wet / Dry., Pile Disk Smt For Mdf And Chipboard. Diameter 250 Mm, Number Of Teeth 80, Type Of Tooth Atb. Application: Finishing Ending And A Canopy Of Moldings, Cutting Panels With A Bilateral Laminated Coating Without The Use Of A Subcutaneous Saw. Technical Parameters Of Carbide Tooths: - Tooth Height, Mm: 8; - Chromium -Containing Alloy, Brand: Kcr06; - Degree Of Hardness (Hv10): 1.950; - Resistance To The Transverse Gap (N/Mm2): 2.300. Pile Disk Smt For Mdf And Chipboard 250X30x3.2/2.2 40 ° Hi Atb Z = 80 283.080.10M
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.