Tenders Are Invited For Building Installation Work - Conversion And Conversion Of The Former Site Town Office To The Administration Building - Wash Hall

Building Installation Work - Conversion And Conversion Of The Former Site Town Office To The Administration Building - Wash Hall. Heating Work Heating Work Execution: Concrete Core Activation In The Middle/End Of July 2025 Remaining Heating Work In The Middle/End Of September 2025. The Heating Pipes Of The Concrete Core Activation Are Laid In An Early Construction Phase. Special Feature: The Distribution Structure Takes Place At A Later Time. This Must Be Observed In The Execution And Coordination. To Ensure Functionality And To Prepare For Regular Operation, A Functional And Tread Heating Heating According To Din En 1264 / Vdi 6030 Must Be Carried Out. Here, The Built -In Heating Circuits Are To Be Heated Up To The Standard. The Measure Is Documented And Captured With Thermalographic Images For Quality Assurance. Approx. 48 M Heating Line Stainless Steel 1,4301 Heating Approx. 1347 M. System Tube Concrete Core Activation Approx. 1 Pc Distributor With 6 Exits (Vl+Rl) 2 St. Connection Existing Heating Circuit Trade Ventilation Work Execution: Mid/End Of September 2025 A Type And Expected Scope: To Ensure The Air Quality And To Avoid Moisture Or Mold Formation, A Radial Fan Is In The Washing Hall Hall Cover Mounted. The Fan Serves The Controlled Dehumidification Of The Hall Air And Is Controlled Depending On Operating Times Or Moisture Sensors. Approx. 1 Pcs Radial Fan Dn 250 Approx. 15 M Assembly Ventilation Tube Approx. 1 Pcmal Steam Silk Absorber Approx. 1 Hours Of The Blower Flap Approx. 1 Hours Of Assembly Deflector Hood For Flat Roof Approx. 1 St. Regulation Ventilation Approx. 2 Pcs Fans With Moisture Control Sanitary Work Execution: Middle/End Of September. Pressure Runner Mounted To Provide Warm Water. In The Washing Hall, Two Swivel Arms With 3 Meters Each Are Installed, Which Are Used For Washing Operation. In Addition, A Third Swivel Arm With 6 Meters Is Installed On The Outside Of The Hall. The Swivel Arms Are Supplied Via High -Pressure Lines, Connected To A High -Pressure Cleaner Assembled In The Technology Center. Furthermore, A Compressed Air Compressor Is Installed, Which Supplies The Hall With Compressed Air Via Several Withdrawal Points. The Exact Positioning And Number Of Compressed Air Connections Takes Place In Accordance With The User Request. Manual Frost Protection Preparation Using Compressed Air: 24V-Ac Magnetic Valve Controls The Compressed Air Supply Of A Compressor. The Lines Are Emptied By Pressing A Button When The Pistol Is Open. Approx. 1 Pounding Basin Approx. 1 Pcs Throughout The Water Heater Approx. 3 Pc. High-Pressure Cleaners Approx. 1 Pc Frost Protection Control With Buttons Approx. 2 Pcs Swivel Arm 3M With C-Rail Approx. 1 Pc-Fan Arm 6M With C-Rail And Column Approx. 1 Pcs System Separator Approx. 1 Pc Compressor Approx. 3 Hours Of Compressed Air Hose Drum Approx. 45 M Assembly Drinking Water Pipe, Stainless Steel Approx.