Bids Are Invited For Acquisition Of Materials To Meet The Needs Of Samu - Mobile Emergency Care Service, Of This Municipality. By The Price Registration System, With Installment Delivery.

High -Intensity Reloading Lantern Security Helmet, Abs Protection Class, Made Of Abs, Impact Resistant, Protecting The Head Against Heavy And Sharp Objects, Suspension In Polypropylene Antiallergic Ribbons, Flashlight And Visor Slot Supports, Front, Side And Rear -Protected Rear, Reflective And Front And Front, Regulation, Adjustment Ratchet, Fitting To Coup The Visor, Ear Protector, Easily Removed Ram Assembly. On The Sides Of The Helmet Samu 192. Warranty Of At Least 3 Months., Tactical Aph Tourniquet, High Tenacity Polyester Tapes, Anodized Aluminum Torsion Bar, Retention Clip, High Strength Polymer Stabilization Clip, Nylon Tape And Ribbon. Must Have Registration With Anvisa. Minimum Warranty Of 3 Months., Rider Articulated Elbow. Description: Made Of Injected Polyurethane Being Articulated In Two Pieces, The Joint Must Be Provided By Two Aluminum Side Screws. It Should Have Two Side Pins Fixed At The Top For Locking At 180º When The Arm Is Extended And 90º When The Arm Is Bent, Which Should Run Through An Existing Semicircular Opening At The Bottom Of The Elbow. Having At Least: 04 (Four) Front Openings At The Bottom And Upper Part For Ventilation, 02 (Two) Lateral Cutouts At The Bottom And 02 (Two) At The Top, Intended For The Passage Of The Fixation Elastic Tapes. One Velcro (Male) Glued To The Structure And Another (Female) Sewn In The Lower And Upper Lining To Fix The Lining In Eva. Internal Lining Of The Upper Removable Part, Made In A Single Part Of Eva Coated In Fabric, Which Should Cross The Polyurethane Structure Injected At Least 20 Mm At The Bottom And 10 Mm At The Bottom. With Cutout Cut At The Bottom For Accommodation To The Structure, And Two Cutout At The Top To Pass The Elastic Tape, And Fixed To The Elbow Through Two Aluminum And Velcro Screws. Having On The Inside Of The Elbow A Circular Protection, Fixed In Foam, Of At Least 2 (Two) Millimeters Thick. One Elastic Tape At The Top And Another At The Bottom, Measuring 25 Mm Wide And 360 Mm In Length. Closing System Via Velcro Ribbon (Male And Female) Sewn And Reinforced With Sewing System In X Measuring 120 Mm Each, With Finishing At The Ends To Avoid Fraying. It Should Not Reflect Light Or Brightness To Assist Concealment In Any Environment. Warranty Of At Least 06 Months., Motorcycle Safety Tactical Glove, Made Of Natural Animal Leather Of Black Goat Animals, Minimum Thickness Of 0, 9Mm On The Leather On The Body Of The Glove, Reinforcements Of The Fingertips And Palm Of Gloves, 0, 7 Mm Of Minimum Thickness, In The Region Of The Fingertips Of The Silicone Application Side, Improving The Grip, With 03 (Three) Flexors On The Fingertips In The Glove Region Of The Glove, As Well As Flexors Located Near The Glove Wrist, With Protection In Thermoplastic Polyurethane Rigid Glove Back, Leather Of Perforated Glove To Increase Ventilation And Facilitate Heat Exchange, Fighter Of Velcro Closure With A Thermoplastic Elastomero Or Similar, With Minimum Two Elements