Request For Quotation Household Goods (Welding Electrode, Hammer, Cutting Disk, Etc.)/

Shield Type Of Installation Of Hinged, Protection Of The Castle, Clicked They Are Used In Lighting Networks For Installing Modular Devices: Automatic Circuit Breakers, Protective Shutdown Devices, Differential Circuit Breakers, Timers, Lighting Control Devices, Etc. Reliable Modern Design And Durable Plastic, Convenient Fasteners Guarantee Products A Long Service Life And Operation Safety. Agree With The Customer, Construction Nail Steel, Length 2, Diameter 2 Mm. A Nail - Fastener, Metiz In The Form Of A Rod With A Head And A Sharp End. The Nail Is Used To Attach Parts From Various Materials (Mainly Wood) Among Themselves. By Hammering, The Hammer Is Introduced Into The Bodies Of The Parts Connected In Which The Nail Is Held By The Friction Force. Type Of Nail: Construction Material: Steel. Coating: Galvanizing Construction Grilled Nail Indispensable In Everyday Life And Construction Of Fasteners. Outwardly, It Looks Like A Rod With A Head And A Pointed End. The Nails In Shape Are Cylindrical, Parallelepiped, Cone Or Pyramidal. The Nails Are Used To Fasten Parts From Various Materials (Mainly Wooden) With Each Other When Hammering With A Hammer In The Part Of The Connected Parts In Which The Nail Is Held By The Friction Force., Construction Nail Steel, Length 4, Diameter 1.8 Mm. A Nail - Fastener, Metiz In The Form Of A Rod With A Head And A Sharp End. The Nail Is Used To Attach Parts From Various Materials (Mainly Wood) Among Themselves. By Hammering, The Hammer Is Introduced Into The Bodies Of The Parts Connected In Which The Nail Is Held By The Friction Force. Type Of Nail: Construction Material: Steel. Coating: Galvanizing Construction Grilled Nail Indispensable In Everyday Life And Construction Of Fasteners. Outwardly, It Looks Like A Rod With A Head And A Pointed End. The Nails In Shape Are Cylindrical, Parallelepiped, Cone Or Pyramidal. The Nails Are Used To Fasten Parts From Various Materials (Mainly Wooden) With Each Other When Hammering With A Hammer In The Part Of The Connected Parts In Which The Nail Is Held By The Friction Force., Container For Food, Plastic, 40L, Construction Nail Steel, Length 100, Diameter 8Mm. A Nail - Fastener, Metiz In The Form Of A Rod With A Head And A Sharp End. The Nail Is Used To Attach Parts From Various Materials (Mainly Wood) Among Themselves. By Hammering, The Hammer Is Introduced Into The Bodies Of The Parts Connected In Which The Nail Is Held By The Friction Force. Type Of Nail: Construction Material: Steel. Coating: Galvanizing Construction Grilled Nail Indispensable In Everyday Life And Construction Of Fasteners. Outwardly, It Looks Like A Rod With A Head And A Pointed End. The Nails In Shape Are Cylindrical, Parallelepiped, Cone Or Pyramidal. The Nails Are Used To Fasten Parts From Various Materials (Mainly Wooden) With Each Other When Hammering With A Hammer In The Part Of The Connected Parts In Which The Nail Is Held By The Friction Force., Processing Of The Material Abrasive, Thickness 1.6 Mm, The Purpose Of The Detachment Material Of The Circle Of Abrasive, External Diameter 180 Mm, Interior Diameter 22 Mm, Abrasive Cutting Circles. The Abrasive Cutting Circle Of Ring (Ring) Is A Thin Disk With A Thickness Of 1 Mm To 4 Mm And A Diameter Of 115, 125.150, 180, 230, 300, 350, 400 Mm And A Landing Hole With A Diameter Of 22 Mm, 25.4 Or 32 Mm. The Cut -Out Abrasive Circle Of Ring (Ring) Is Designed For The Rapid Accurate Cut Of Products Of Various Shapes: Corner, Reinforcement, Pipes, Sheet, Etc., Made Of Steel, Cast Iron Or Colored Alloys. For Cutting Metal Up To 10 Mm Thick, You Can Use A Cut Circle With A Diameter Of 125 Mm And A 22 Mm Landing Hole. Through The Mandrel, It Is Installed In The Cartridge Of A Conventional Drill. The Abrasive Trim Circle Of Ring (Ring) Cuts Metal By Particles Of Fine -Grained Material Of High Hardness, Resembling Grains Of Sand And Sizes (Abrasive). They Are First Mixed, Then Compressed With The Binding Mass Of Bakelite (Plastic). A Mixture Of Abrasive, Ligaments And Filler Is Placed In The Mold, Compressed And Treated Thermally. The Sharp Vertices Of The Abrasive Protrude Above The Surface Of The Ligament, Touching The Metal, Cut Off The Smallest, Construction Nail, Length 10, Diameter 4 Mm. A Nail - Fastener, Metiz In The Form Of A Rod With A Head And A Sharp End. The Nail Is Used To Attach Parts From Various Materials (Mainly Wood) Among Themselves. By Hammering, The Hammer Is Introduced Into The Bodies Of The Parts Connected In Which The Nail Is Held By The Friction Force. Type Of Nail: Construction Material: Steel. Coating: Galvanizing Construction Grilled Nail Indispensable In Everyday Life And Construction Of Fasteners. Outwardly, It Looks Like A Rod With A Head And A Pointed End. The Nails In Shape Are Cylindrical, Parallelepiped, Cone Or Pyramidal. The Nails Are Used To Fasten Parts From Various Materials (Mainly Wooden) With Each Other When Hammering With A Hammer In The Part Of The Connected Parts In Which The Nail Is Held By The Friction Force., Electrode Diameter 2 Mm, Electrode Length 350 Mm, Electrode Type Metal Type Of Metal Electrode Cashing Type Of Covered Electrode By Coating With Routine Coating The Weight Of Packaging 2.5 Kgswakh Electrodes. The Electrodes Of The Mr-3 Ars Are Designed For Manual Arc Welding Of Structures Made Of Carbon Brands Of Steels According To Dstu 2651/Gost 380 (Article 0, Article 1, Article 2, Article 3) And Gost 1050-88 (05Kp, 08Kp, 08Ps, 08, 10Kp, 10Ps, 10, 15Kp, 15Ps, 15Ps, 15Ps, 20Kp, 20Ps, 20). Surfacing Coefficient-8.0-9.0G/A.Ch. The Consumption Of Electrodes Per 1 Kg Of Saved Metal Is 1.7 Kg. Designed For Welding Of Corner, Butt, Metal Joints Of Metal With A Thickness Of 2 To 20 Mm. Electrodes With A Diameter Of 2.5 To 4 Mm Are Suitable For Welding In All Spatial Positions Except The Vertical, In The Way From Top To Bottom; With A Diameter Of 5 Mm - For Welding In The Lower, Horizontal On The Vertical Plane And Vertical Bottom Positions. Welding By Electrodes Mr-3 Ars Must Be Performed By Direct Current Of Any Polarity Or Alternating Current From A Transformer With An Idle Voltage Of At Least 50 V., Height 200 Mm, Diameter 70 Mm, Characterization Of Weight In Gr 350 G, Type Of Dowel Dowel-Gearbox, Dowel-Chomut, Dowel-Shurup, Spacer, Purpose Of Dowel For Sheet Materials, For Dense Full-Bodied Materials, Dowel Diameter Of 6 Mm, Dowel Length 40 Mm, Diameter Of A Dowel Of 6 Mm, Depth Of A 40 Mm Dunk, Packaging Pack, Amount In Packaging In Packaging 100 Pcs. It Is Used For Fasteners Of Frames, Rails, Cable Channels, Cornices, Brackets For Attaching Pipes, Wall Metal Hangers. Dubel Material: Pnd Low -Pressure Polyethylene, Polypropylene, Nylon. Coating: Galvanized, Yellow -Painted. Application: Fastening To Concrete, Full -Bodied Materials, Bricks With Voids, Foam Concrete Of All Kinds Of Wooden Parts, Including A Crate For Plaster, Frames, Docking Walls Or Plastering Profiles, Skirting Boards, Wall Corners, As Well As Cable Channels, Cable Clamps And Pipes, Thin -Leaf Steel And Other Elements