The Subject Of The Contract Involves The Completion Of Construction Activities In Connection With The Correction And Cleaning Of The Levskska River Within The Regulation Of The Village Of Leskovets With A Total Length Of The Section Of 942,04 M. The Intended Section Of The River Within The Borders Of The Village Of Leskovets Is Divided Into Three Toddles. Second - From The Bridge At Kokiche Street To The Bridge On Druzhba Street; Third - From The Bridge At Druzhba Street To The End Of The Village (At The Oven), Where A Pedestrian Passenger Is Installed. The Intended Construction Activities For Each Of The Subdivisions Are As Follows: In The First Application - From Hcm 0+00,00 To Hcm 3+43,68 It Is Envisaged To Clean The River Bed And Adjust Its Earth Profile With A View To Conducting The Normative Water Quantities. The Transverse Profile Is Trapezoidal, With A Width Of 3.00 M And Lateral Slopes 1: 2, With The Depth Of The Dimensional Profile Being 2.00 M. Above This Height, Bermes Are Formed With A Width Of 1.00 M And The Extension Of The Slopes To The Field, Which Is Different At Each Profile Of The Length Of That Submission. At The Second Subway - From Hcm 3+43,68 To Hcm 5+95.09 The Adjusted Submersion Is Lined. The Profile Is Trapezoidal, The Bottom Is 3,00 M And A Concrete Lining, Limited By Vertical Concrete Walls With A Height Of 0.70 M. Depending On The Specific Transverse Profile, This Type Of Profile Is Connected To The Field Line With An Unloved Slope 1: 2. The Third Application - From Hcm +595,09 To Hcm 9 +42.04 Is Designed To Be Cleaned And Corrected As An Earth Profile In Shape And Sizes Identical To The Profile In The First Subway. The Geometric Dimensions For All Three Subdivisions Are In Accordance With The Condition That The Corrected River Bed Should Carry Out The Regulatory Water Quantities. The Correction Of The River Is Designed And Shown In The Direction - From The End Of The Village To Its Beginning, That Is, In The Direction Against The Stream. A Detailed Description Of All Activities Provided Is Contained In The Technical Specification Attached To The Documentation.
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
