Metallic Cabinet The Materials To Be Used For The Manufacture Of Metal Cabinets Are: 1 Ify/8 Inches; Uti Optical Screen Profile 2, 5 Cm X 2, 5 Cm; 4 -Ine Rolley (Mechanism Set At The Metal Cabinet Base And Which Works As A 360º Rotate Around The Bracket; Ports.We Will Have The Following External Measurements (Figure 2): Height Without The Wheels: 2Darm With The Wheels: 2, 13Mlargure: 2Mprofundity: 0, 60Mmedids Of The Door, Fixing Mechanism And Lock Closing System: Height: 1, 96M Width: 0, 36Mcom Closing System - Padlock (Figure 3) Door Fixed Fixed To The Door And Structure Cabinet (Figure 4) Structure Of The Ports Made With Firefighter Firefighter Office (Figure 2): External: Height: 0, 40M; Width: 0, 40M; Depth: 0, 60Mmedids Of The Appliance/Pants And Pants And A Firefighter Boot (Figure 2): External: Height: 1, 60M; - Cabid Support (Figure 2, Item 3): Fixed 9 Cm From The Optical Screen Base Of The Helmet Compartment Towards The Ground. Metal Cabinet (Fig. 2): 1St Boring Bar: It Will Be Fixed - Height 0, 40M - From The Base Of The Cabinet (Not Counting The Wheel Mechanism), Welded In The Side And Door Singer; Boring: Will Be Installed 1, 34M From The Base Of The Cabinet (Not Counting The Wheel Mechanism), Welded In The Side And Gates Singer;, 23/05/2025
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
