Tenders Are Invited For Modernization Of Orlik In The Powstańców Wielkopolskich Park

The Subject Of The Investment Is - Modernization Of The Existing Orlik Pitch In The Powstańców Wlkp Park In Śrem.1. As Part Of The Modernization, It Is Expected To Make • Replacement Of The Surface Of Artificial Grass With Mines: Non -Bold Grass, I.E. It Is Required To Fall Asleep With Quartz Sand. Surface Description: The Surface Should Be Made Of Two Types Of Fibers, I.E. Fiber - Straight, Monophilic, Polyethylene With A Thickness Of Min. 360 Microns, Fiber B - Textured, Polyethylene With Fiber Thickness Min. 320 Micronime Minimal Requirements For Synthetic Grass Surfaces: Fiber Length Min 30Mm Max 35Mmmility Of Bunnies Min 17.400/M2 Fibrillation Min 380,000/M2 Total Grade Total Surface Of Min 4400 G/M2 Vaper Fiber At Min With A Thickness Of Mines 360 Microns, And B - Textured, Monophilic, Polyethylene With A Thickness Of Fiber At Least 320 Micronówdtex Total Min. 21,000 Grass. Product And The Required Features And Parameters Of The Surface From The Contractor Are Required By The Evidence In Question: A Complete Report On Laboratory Tests For The Artificial Grass System (Surface With Quartz Sand And Mat), Confirming The Compliance Of All Parameters Of The Offered System With The Current Standard En 15330-1: 2013/ Pn-En-En 15330-1: 2014-02 Offered Synthetic Grass Determined By The Contracting Authority. The Test Must Be Performed By An Independent Laboratory, Accredited In Accordance With Iso/ Ice 17025: 2018 Technical Card Of The Offered Surface, Certified By Its Manufacturer, Confirming The Minimum Parameters Required By The Contracting Authority In The Range In The Range That Was Not Covered By The Research Report In Accordance With The En 15330-1: 2013/ Pn-En 15330-1: 2014-02Est Pzh For Pzh For Synthetic Grass Offered, Mats And Sandyutorization Of A Synthetic Grass Manufacturer, Put Up For The Contractor For The Implemented Investment From The Lisport Test Tests For Min. 200,000 Cycles For Fibers Offered Synthetic Grass Carried Out By An Independent Laboratory In Accordance With The En 15306 Standard Surfaces For Open Sports Areas - Grass Exposure To Influence Confirming That Fibers After Min. 200,000 Cycles Do Not Show Visible Damage. The Test Is To Be Performed By An Independent, Accredited Laboratory In Accordance With Iso/Iec 17025: 2018. • Replacement Of Polyurethane Surface On The Volleyball Pitch/Basketball, As Spraying On The Background Et, • Replacement Of The Existing Mesh Fence For A New Galvanized With A Stable Cable, • Replacement Of Existing Football Lighting Luminaires For Energy -Saving Led.2. The Names Of Manufacturers And Products Used Are Used Only To Clarify The Subject Of The Contract, And The Order Should Be Processed From The Materials Indicated In The Documentation Or Equivalent. In The Event Of An Equivalent Offer, It Is Required That The Equivalent Product Has Identical Or Better Properties, Utility Parameters, Chemical Composition As The Products Indicated By The Contracting Authority In The Description Of The Subj