Tenders Are Invited For Purchase And Assembly Of Solar Lamps In The Łyse Commune

5.1. Code According To A Joint Order Dictionary (Cpv): 31520000-7-Lamps And Luminaires Lighting 31527200-8-External Lighting45316110-9-Installation Of Road Lighting Devices45316100-6-Installation Of External Lighting Devices45317000-2-Other Electrical Installations5.2. The Subject Of The Order Is The Purchase And Installation Of Solar Lamps In The Łyse Commune, Including: A) Delivery, B) Installation, C) Launching And Commissioning Of Lighting Solar Sets, Which Includes:  Prefabricated Foundation,  Steel Column With Grounding,  Photovoltaic Panel,  Lighting Luminaire With Energy Storage And Controller, As Follows. Specification For: 1. Village Councils: Dawni, Dęby, Łyse - A Total Of 9 Pcs. 2. Village Councils: Serafin, Szafranki, Piątkowizna - A Total Of 7 Pcs. 3. Sołectwo: Tartak - 2 Pcs. 4. Sołectwo: Duda Puszczańskie - 1 Pc.D) Making As -Built Documentation, Including: 1. Statement On The Compliance Of The Object With Applicable Regulations, 2. Research And Check Reports, 3. Geodetic And Conflict Documentation. 5.3. Technical Parameters Of Solar Lamps: 1) Minimum Power Of Led Binding 40W, 2) Solar Panel: Double -Sided (Bifacial), Monocrystalline, With At Least 80W, With The Possibility Of Adjustment In The Range:  360 ° Horizontally,  160 ° Vertically. 3) Color Temperature In The Range 6000K, 4) Light Source Min. 50000H, 5) Color Reflection Indicator (Cri) ≥75.6) Light Stream Above 7200 Lm, 7) Light Distribution Angle: 150 ° X 70 ° (Road Light), 8) Degree Of Protection Ip 65.9) Autonomy Time Min. 4 Days, 10) Lamp Working Time Min. 10 Hours/100% Power In Autumn-Winter Conditions, 11) Battery:  Type: Lifepo4,  Minimum Capacity: 384 Wh,  Built-In In The Binding,  Lifetime: Minimum 2,000 Cycles With Deep Discharge, 12) Built-In Mppt Regulator, 13) Lamp Equipped With A Dusk And Movement Sensor (Scope Of Min. 10 M), 14) Steel Pole:  Type: Round, Conical,  Wall Thickness: Minimum 3 Mm,  Adapted To The 1St Wind Zone,  Hot-Dip Tinned According To Pn-En Iso 1461,  Height: Minimum 6.0 M (For Solar Fitting),  Base: Quadratic, With The Possibility Of Assembly On The Prefabricated Foundation, With Prefabricated Foundation Place Prepared To Connect The Grounding, 15) Prefabricated Concrete Foundation:  Height: Minimum 120 Cm (Dimensions Adapted To The Pole Used By The Contractor),  Hot Spitzed Screws, 5.4. The Pole Should Be Adapted To The Installation Of The Set Set And Solar Panel With The Equipment And Have Declarations Of Functional Properties Signed With The Ce Sign Issued By The Manufacturer. All Components Of The Solar System Should Have Ce Certificates And Have An Admission To Build. All Certificates, Technical Approvals, Catalog Cards, Technical And Movement Documentation Of Devices As Well As Their Individual Parts (Components) Of Components Of Devices Should Be Translated Into Polish. The Above-Mentioned Documents Will Be Required. 5.5. The Contractor Is Responsible For The Supply And Assembly Of Factory -Unused And Not Prototyp