Bids Are Invited For Price Registration For Future And Eventual Acquisition Of Road Signs, Solvents And Microspheres To Meet The Demands Of The Traffic And Urban Mobility Secretariat.

White Road Paint With Low-Bin Spot Rate With Rapid Drying. The Ink Should Be Supplied For Use On A Bituminous Surface Or Portland Cement Concrete, Immediately After Opening The Container, Should Not Have Sediments, Cream Or Lumps. The Ink Should Be Susceptible To Rejuvenation By Applying A New Layer And Should Be Able To Be Applied At The Environment Between 5 ° And 40 ° C, Pavement Temperature Between 10 ° And 45 ° C And Relative Moisture Of The Environment By Up To 80%. Be Able To Apply By Appropriate Machines And Have The Specified Consistency, Without The Addition Of Any Other Additive. In Case Of Incorporation Of Glass Microspheres, Respect The Quality And Quantity In Force In Abnt-Nbr 11.862 Standard. It Can Be Added A Maximum Of 5% (Five Percent) Of Volume Solvent Over The Paint, Compatible With It For Viscosity Hit. Ink Can Be Applied In Thicknesses, When Damp, 0, 4 Mm To 0, 6Mm Variables And When Applied To The Specified Quantity, It Should Perfectly Cover The Floor And Allow Traffic To Release A Maximum Period Of 30 Minutes Without Stained And Should Be Fully Dry And Fully Maintain Its Cohesion And Color After Application To The Floor. After Total Physical Drying Should Have Plasticity And Adhesive Characteristic The Glass And Floor Microspheres, Produce Dry, Uniform Aspect, Without Cracking, Cracks Or Peeling During The Shelf Life. When Applied To The Bituminous Surface, It Should Not Have Bleed Or Exercise Any Action That Damages The Floor And Under Normal Conditions Of Use, The Ink After Applied Should Not Have Excessive Adhesion Of Dirt, Causing Premature Appearance Of Aging And/Or Wear. The Ink Should Not Modify Its Characteristics (Not Being Able To Have Thickening, Coagulation, Stubborn Or Sediment That Cannot Be Easily Dispersed By Manual Agitation, And Should Have A Rapid-Drying Yellow Road, Ink Should Be Supplied For Use On A Bituminous Surface Or Portland Cement Concrete, Present Aspect, Low-Stain Blue Ink With Low Rapid Drying Should Be Supplied For Use On A Bituminous Surface Or Concrete Portland Cement, Presenting Black, Low-Drying Black Road Paint. Ink Should Be Supplied For Portland Cement Or Concrete, There Is A Low-Paint-Spotted Oven Ink With Rapidly. Of Concrete Portland Cement, Solvent For Road Demarcation 18L - Solvent For Dilution Of Paints For Horizontal Road Demarcation1– Objective2 - General Conditions1. This Document Fixes The Minimum Characteristics Required To Supply Diluent For Application Of Horizontal Road Demarcation.2. Shall Bring In Your Body, Very Readable, The Following Information: A) Productob Name) Commercial Name; C) Date Of Manufacture; D) Validity Period; E) Identification Of Manufacturing/Lot; F) Name And Address Of The Manufacturer; G) Quantity Contained In The Container, And