Tenders Are Invited For Building Construction Work - Build A New Sports Hall In The Area

Building Construction Work - Build A New Sports Hall In The Area. The New Sports Hall Has A 300 -Seat Net And Has A Net Floor Area Of ​​2832.32 M2. The Building Is Based On A Monolithic Lane/ Sheet Base And Classified Crushed Stone Filling With Reinforced Concrete Uprising Structures And Large -Spathed Steel Cover. The External Walls And The Roof Will Be Equipped With Thermal Insulation Of The Energy Regulation. 1 Rtg Soil Moisture Insulation Is Made, Bauder From Weldable Bitumen Thick Plate, (V = 4 Mm) Below The Entire Surface Of The Floor (Contact) And In The Masonry Part, Under The Main Walls, Partitions, By Applying The Main Wall Insulation. Insulation Lines Must Be Continuous By The Ascending Structures Statically Sized Monolithic Reinforced Concrete Walls. Porotherm 10 N+F Ceramic From Brick And/ Or Rigips Plasterboard Partitions Are Built. Cassette And Flat Plasterboard Ceilings Are Created With The Necessary Mounting Openings In A Rigips System. When Constructing Partitions And Ceilings, The Manufacturers Technology And Application Requirements Must Be Observed. Heading Part Static Pre-Made Steel, Porotherm System Identifier And World Cup. Beam Is Built. The Slab Static Is 26 Cm Thick. Vb. Plate. In The Head Building, Metal Plate Cover, (Or Metal Plate Periphery And Pvc Disk) Hall) Is A Layer -Based Plastic Waterproofing Pvc -Based Plastic Waterproofing. Subtrack: Layer Thickness Austrotherm Nt 100 Steps Resistant Thermal Insulation 10 Cm. The Plinth Part Is 20 Cm Thick Austrotherm Expert In The Soil And 20 Cm Of Austrotherm Graphite System On The Facades. At The Roofs, Rockwool Monrock Max E 30 Cm Thick. The Thermal Insulation Systems Form A Complete System, The Manufacturer, Fire And Otes Prescriptions, Utility And Implementation Requirements Must Be Fully Observed And Taken Into Account For Precise Execution To Achieve The High Energy Of The Building. On The Arena, A Sports Floor Cover Is Made With A Layer Design. On The Wall: The Water Block Rooms Are Made To The Door Jacket. On The Outdoor Internal Sidewalk And Indoor Entry, A Frost -Resistant, Non -Slip Concrete Paving Cover Is Made. The Isna Is Built Up To 3.00 M Height (Noise Absorbing And Wall Protector). The Barriers Are Made Of Stainless Metal In The Stairs, Partly Solid Parapets On The Stands And Partly Trained Safety Glass Restrictions That Do Not Prevent The Track. On The Stands, The Seating Is Mon. Vb. For The Stairs Of The Stands, Pre -Made Plastic Solo Type Chairs With Backrest. Austrotherm Graphite H. No. System Visual Design And Facade Plan. Inner Wall Surfaces Are Designed And Dispersed. See Consignments And Cover Plans In Detail. Drinking Water Supply, Fire Water: See A Separate Mechanical And Fire Protection Design Documentation In Detail. The Air Technology System Will Be Installed, With The Legionella Bacterium To Be Completely Disinfected And Regularly Required. The Kel