Tenders Are Invited For Modernization Of The Roof And Facade Of The Womp Building In Kielce

The Subject Of The Order Are Construction Works Involving: Modernization Of The Roof And Facade Of The Womp Building In Kielce In Accordance With A Detailed Description Of The Subject Of The Contract, Specified In The Attachments To The Specification Of The Terms Of The Contract And Technical Documentation. The Works Will Include: A. Insulation Of The Flat Roof With Granules From Rock Wool Gr 30Cm With A Factor Of 0.042W/Mk, Reaction Class A1.B. Damage Insulation Of The Roof Surface. 1. Profiling Of Declines. 2. Installation Of 4,2Mm Under The Heat -Sealable Undergrowth Roofing Roofing Felt 3. Installation Of Icing Roofing Roofing Roofing Felt 5.2Mm Modified Sbs, Resistance To Flow At A Temperature Of Min. 100Stc, Flexibility At Low Temperature -25Stc. 4. Performing Flashings For Chimneys, Fireworks, Cornices. 5. Performing A New Belt Under And Over The Gutter On Wooden Substitution. 6. Replacement Of Roof Gutters And Downpipes With Inclusion In The Reproduced Rainwater System. 7. Insulation Of Chimney Shaft And Tube Cornice With Polystyrene Slabs Eps 100 Gr 5Cm With A Silicone Expedition And Mounting Metal Chimney Grilles. 8. Execution Of A New Lightning Protection Installation. C. Making A Ventilated Facade From Hpl.1. Disassembly Of The Logo. 2. Disassembly And Re -Assembly Of Elements Installed On The Facade, I.E. Climate, Cameras, Sirens, Etc.3. Forms Existing Cladding In External Glyphs. 4. Cleansing The Existing Ground And Fumigation. 5. Making Sockets In The Load -Bearing Wall For Installation Of Consoles. 6. Supplements Of Insulation In Mineral Wool Sockets. 7. Installation Of An Aluminum Sub -Structure Dedicated To Ventilated Facades. 8. Arrangement And Attachment Of Laminated Wool With A Glass Veil Gr 12Cm Car 0.032W/Mk.9. Making Cladding From Hpl Gr 8Mm Plates -Non -Compound: Class A2 -S1, D0.10. Installation Of Dismantled Elements, I.E. Grilles, Reeds, Railing Inspection Door Installation New Galvanized Powder Painted. 11. Execution Of A New Flight Installation. Insulation Of Walls Below The Ground1. Disassembly Of The Concrete Band. 2. Exciting Foundation Walls. 3. Disassembly Of The Rim From Bednarka. 4. Disassembly Of The Existing Rainwater System And Band Drainage. 5. Wall Cleaning. 6. Reflection Of The Plaster. 7. Performing New Cement-Lime Plaster8. Antiwilgic Insulation Of The Walls -Kmb Masa Two -Component Thick -Layer Gr 5Mm After Prior Primension, An Additional Fiberglass Mat For Strengthening Bituminous Coatings. 9. Making Thermal Insulation From Xps Gr 10Cm Boards With Parameters: 0.036 W/Mk, Compressive Strength With 10% Deformation Cs - 300 Kpa, 10. Installation Of Bucket Foil. 11. Restoration Of Rainwater Drainage And Band Drainage. 12. Arranging A New Rim From Bednarka 30X4mm. 13. Backfilling Of Excavations. 14. Recreating A 100Cm Wide Band- Edge +Concrete Cube Gr 6Cm.15. Disassembly Of The Scaffolding. 16. Ordering Neighboring Areas. Replacement Of Window And Door Joinery. 1. Disassembly Of Joinery And Internal And E