Steel Shelf - 06 Shelves - 1, 98 X 0, 92 X 0, 30 - Egg Bark, Detachable And Adjustable Shelves, Plate 22, With X Reinforcement, 80 Kg Capacity By Shelf. The Material Should Be Of 1St Quality. 12 -Month Warranty., Steel Shelf - 03 Shelves - 0, 30 - Eggshell, Made Of 26 Steel Plate, With 04 Columns In Profile L In Plate 20, Plastic Shoes. Capacity Of 25 Kg Per Shelf. According To Minimum Specifications: In Mdf Thickness Of 18 Mm, Measuring 1200 (L) X 900 (A) X 400 (P) Mm; Formed By 08 Niches, Being 06 Spans Measuring Internally 380 (L) X 260 (A) X 380 (P) Mm And Two Spans Measuring 570 (L) X 260 (A) X 380 (P) Mm, 4 Mm Under Compensated; Coated On The Outer Face In Formica Laminate; Egg Bark Color; With Casters; Headed Tops With Pvc Onboard Tape. 40X20 Industrial Steel Pipe Base With 1, 2Mm Thick, Electroplastic Paint Paint Epoxy Powder, Egg Bark With 04 Rotary Casters In Gel, 02 With Locks And 02 Without Casters., Fixed Chair 4 Feet, Without Fabric -Coated Arms, Specifications: Fixed Chair Upholstered Secretary, Manufactured In Industrial Steel Construction Tube Carbon Abnt 1008/1020 With 25, 4Mm Diameter And 1, 5 Mm Wall, And Abnt 1008/1020 Carbon Steel Platters In 20X20 Mm Square Section Tube With 1, 2 Mm Thick. The 4 Feet -Shaped Base Is Manufactured By The Mechanical Tubing Curve Process, Having 2 (Two) Platters That Unite One Leg To The Other By The Mig Welding Process. The Structures Contain 4 (Four) Articulated Fixed Slips, Designed To Keep The Base Supported On The Floor And Especially To Avoid Direct Contact Of The Metal With The Support Surface. Made Of Thermoplastic Material Called Polypropylene, By The Injection Process. The Structure Is Fixed To The Seat By Frogs Flanged With Approximate Measures Of %X L.Vz, Along With 4 (Four) 5 Mm Shims, Injected Into Engineering Thermoplastic (Polypropylene Copolymer). The Entire Structure Receives A Metal Surface Preparation Protection In Nanotechnology (Ceramic Nano), And Epoxy Powder Electrostatic Coating, Which Ensures Protection And Longer Life To The Product. Structural Seat Consisting Of Plastic Structure Injected Into Polypropylene With Fiberglass. It Has Lugs Inserted At The Assembly Points Of The Structure, Made Of Carbon Steel And Covered By The Electrodposition Process To Zinc. In The Seat Structure 1 (One) Ergonomic And Flexible Foam Pillow Based On Polyurethane (Pu), Manufactured Through Polio/Tiodanate Chemical Systems By The Under Pressure Injection Process. This Pillow Has A Controlled Density Of 50 Kg/M3 And Variations May Occur In The Order Of +/- 2 Kg/M3.0 Set Is Covered With Black Fabric By Conventional Tape Process. Its Dimensions Are Approximately 480 Mm (Width) X 455 Mm (Depth) Showing At Its Ends Round Rounded Corners. The Aind Seat, A Whole With Three Wagon-Type Chairs, Will Consist Of 3 Upholstered Chairs, Differentiated As To The Type Of Coating. Pedestals Will Have Devices At The Ends For Leveling The Furniture, With Adjustment Through Thread. The Steel Plates Over Which The Seats Of The Chairs Will Be Welded Over The Stringent Or, Firmly Fixed. T
