Bids Are Invited For Acquisition Of Permanent Equipment And Materials For The Municipal Hospital Dr. Waldemar De Alcântara - Hmwa As Proposed No. 10295311000124011 And Gm/Ms Ordinance No. 3,747, Of May 7, 2024 Authorizing The Municipality To Receive Financial Resources For The Above Acquisition, Through The Municipal Health Secretariat Of Fortim/Ce.

9000 Btus-Split Air Conditioning, Air: Hot/Cold For Environments Up To 15M. 9000 Btu/E E 2640W Refrigeration, Maximum Power 814W. With The Possibility Of Use On The Toilet, In The Bath And For Internal Locomotion, It Offers Incomparable Versatility. Its Removable Frontal Seat Facilitates Hygiene, While The 4 Wheels With Locks Provide Easy Transport, Even In Reduced Spaces. The Anatomical Backrest, Mock Arms Support And Waterproof Padded Seat Ensure Comfort. Equipped With A Folding And Folding Foot Support, This Chair Is The Safe And Practical Choice For Your Routine. Technical Systems- System 4 In 1, And Can Be Used For Bathing, Use On The Vase, Hygiene And Internal Transport.- Ideal For Users With Locomotion Difficulty, Facilitating Their Seated Hygiene- Fucrable Anti-Fomed System, Facilitating Their Use For Internal Transportation And Handy Wheel Support And Support Paddocaracaracteristics: Composition: Aluminum, Polypropylene - Pvccapacity: Supports Up To 150 Kgdentable: Simdobrable: Simregisro Anvisa, Fixed Director Chair, No Fixed Director Arms, Structured In Polypropylene Chassis Injected With Structural Reinforcement Fins, Molded Flexible Foaming With Molded Polyurethane Foam Predominant Average Thickness Of At Least 35 Mm And Endowed With Backward Polypropylene-Injected Backrest That Leaves Inaccessible And Not Apparent To The Backrest Extensor Fixation Points On The Swallow Chassis And Cover The Same Extensor, Leaving It Apparent During The Vertical Adjustment Operational Course. Minimum Width Of 440 Mm Backrest, Minimum Vertical Extension Of 400 Mm Backrest, Backrest Adjustment At Least 5 Points, With Minimum Adjustment Vertical Course Of 70 Mm. Seat: Structured In Polypropylene Chassis Injected With Structural Reinforcement Fins Or In A Minimum Anatomical Multilaminar Plywood Of 12 Mm Thick Thickness, Flexible Flexible Padded Paddle -Molded Flexible Foam With 40 Mm Of Average Minimal Thickness With Countercap For The Injected Polypropylene Seat That Protects The Entire Counter And Borders. Fixing The Elements To The Seat Chassis Through Screws And Claws With Metric Thread. The Use Of Pvc Border Profile For Finishing And Or Fixing The Seat Back Cover Will Not Be Tolerated. Seat And Back Lining In Crepe Fabric, Polyester, Or Synthetic Laminate Spread Over Mesh In Color To Define According To The Manufacturers Card. Minimum Surface Width And Depth Of 470 Mm. Fixed Structure Of The Balance Type, Or In “S”, Where The Seat Is Suspended, Manufactured From A Carbon Steel Elliptical Tube, Whose Minimum Measurements Are 20 X 45 X 1, 90 Mm. Manufactured Seat Support Platform From Steel Tubes. It Should Have Minimum Quality Evidence Certification, Being Ergonomic Report In Accordance With Applicable Sub-Item Requirements 17.3.3 Of Nr-17, Mtps 3,751 Ordinance Of The Ministry Of Labor And Employment, Issued By S ... Hospital Hospital Bed. Material: Stainless Steel, Surface Finish: Electrostatic Painting, Type: 3 Mock Cranks, Wheels: 4 5 Casters, 2 Diagonal Casters, Length: Up To 1, 90 M, Width: About 0, 8