Quotation are invited for Immersible Pump 1 Delivery Date: 2025/07/28 Delivery To: Water Services Delivery Address: 1 Blue Waters Close, Simons Town Closing Date: 2025/05/26 Closing Time: 04:00 PM Description: 1 each x immersible pump 1 Specification: * SPECIFICATIONS Hydraulic:,, Suction Nozzle:,,,,200 mm drilled to PN 10 Discharge Nozzle:,,,,125 mm drilled to PN 16 Type:,,,,,,E125 Regulable:,,,,yes Impeller:,,,,,,HL Free passage:,,,,100 mm Inspection cover:,,,,yes Weight:,,,,,,113 kg Motor Type Hidrostal: ,,,,EEX04 - immersible Nominal Rating Pn:,,11.0 kW,,,, Voltage / Frequency: ,,400 V / 50 Hz Speed:,,,,,,1435 rpm Nom. Current / cos ?:,,26.0 A / 0.75 Starting Current IA/IN:,,6.0 Winding Protection:,,Bimetal switch Starting Method:,,,,Y/? Cable length:,,,,10 m Cable details:,,,,10x1.5mm², Ø16.1mm, 4x1.5mm², Ø10.1mm Cable mat. / screened:,,EPR/PUR / no Ex-Proof:,,,,no Enclosure:,,,,IP 68 Insulation:,,,,F Fly Wheel:,,,,no Insulated Roller Bearings:,,no Oil volume:,,,,8.0 l Weight:,,,,,,223 kg Material of Hydraulic Volute Casing: ,,,,0.6025 (GG25) Impeller: ,,,,0.7060 (GGG60) Liner: ,,,,,,- Seal plate:,,,, 0.6020 (GG20) Shaft: ,,,,,,1.4021 (X20Cr13) Seal motorside: ,,,,38 mm / G-Type - SiC-G/SiC-G Seal pumpside:,,,,38 mm / G-Type - SiC-G/SiC-G O-Rings: ,,,,Nitrile Instrumentation Conductivity probe: ,,yes Float Switch:,,,, no Bearing Temp. Probe:,, no Temperature probe: ,,no Vibration Sensor:,,,, no Miscellaneous Installation: ,,,,vertical Pump Weight:,,,, ~ 336 kg Painting: ,,,,Standard Painting Paint Thickness: ,,,,150?m, Standard RAL 5010 Accessories Hanger: ,,,,,,5AH-XBR/B Weight: ,,,,,,3.6 kg Quotation Conditions NB: PLEASE SUBMIT SAMPLE PICURE OR SPECIFICATION SHEET, IF NOT RECEIVED YOU MAY BE DEEMED NON COMPLIANT CLAUSE - 2.14.1 & 2.15 Provide, on request by the CCT, any other material that has a bearing on the quotation offer, the supplier#s commercial position (including joint venture agreements), preferencing arrangements, or samples of materials, considered necessary by the CCT for the purpose of the evaluation of the quotation. If the Specifications require the supplier to provide samples/technical data sheets, these shall be provided strictly in accordance with the instructions set out in the Specification. If such samples /technical data sheets are not submitted as required in the bid documents or within any further time stipulated by the CCT in writing, then the bid concerned may be declared non-responsive. Wherever reference is made to any particular Trade Mark, Name, Patent, Design, Type, Specific Origin or Producer, such reference shall be deemed to be accompanied by the words or equivalent# NB: The Municipal Bidding Document 6.1 (MBD 6.1) is attached, in order to be eligible for preference points bidders are required to submit a duly completed, current dated MBD 6.1 document with supporting documents with each and every RFQ submission, failure to submit will result in zero point allocation. *** PLEASE ENSURE THAT ALL REQUIRED INSURANCES SUCH AS YOUR PUBLIC LIABILITY, EMPLOYERS LIABILITY OR COIDA AND MOTOR VEHICLE INSURANCE ARE ATTACHED AND THAT THEY ARE UP-TO-DATE. IF YOU UTILISE COURIERS AND DO NOT HAVE MOTOR VEHICLE INSURANCE, THEN PLEASE MENTION THIS. ALSO ENSURE THAT YOUR UPDATED DECLARATION OF INTEREST AND BBBEE IS ATTACHED AT ALL TIMES*** Immersible Pump 1 CONTACT ROBERTO SCOTT 073 187 4895 Region 1 South: EAM Blue Waters Close, Simons Town Landline: 021 814 1684 Tender Link : http://web1.capetown.gov.za/web1/ProcurementPortal/RFQ/Details/305104
