Quotation Are Invited For Water Meter In Box;Vol;Plas;20Mm;165Mm

Quotation are invited for Water Meter in Box;Vol;Plas;20mm;165mm Delivery Date: 2025/06/10 Delivery To: Logistics - Hillstar Water Works MATERIALS STORE Delivery Address: 1 Bamboesvlei Road, Wetton Closing Date: 2025/05/27 Closing Time: 04:00 PM Description: 540 each x water meter in box;vol;plas;20mm;165mm Specification: * WATER METER IN BOX - TYPE: Volumetric; MATERIAL: Plastic; BORE: 20mm nominal bore; BODY LENGTH: 165mm; REQUIREMENTS: Must be metrological class C, must have a wet dial, liquid filled register fitted hermitically sealed that will withstand condensation at all times. Pulse output and must be AMR ready; MAXIMUM FLOW RATE: (q/max)+2%:5.0 m³/h ,Permissible continuous flow(qp)±2%, 2.5m³/h, Minimum flow rate(g/max)±2%,15l/h,Transitional flow rate(qt)± 2%,37.5l/h, Maximum working pressure, 1600Kpa; MATERIAL OF BOX: Plastic, meter box must be fitted with a base plate and be lockable, meter box must accommodate a ball stop isolating valve and non return valve, non return valve and the strainer must be built-in the water meter, meter boxes must be fitted with B.S.P. threaded nipples and or HDPE inlet and outlet quick coupling and the inlet and outlet ports be the same size. Plastic meter box materials must not have a recycling value; STANDARDS: Meter boxes must be SABS and Jaswic approved, meters must comply with the provisions of SANS 1529-1, in addition it is required that all 15mm, 20mm and 25mm meters offered within this tender must be tested and sealed by an authorized official in a SANS 10378:2012 accredited laboratory situated within the borders of the RSA, Meters purchased are intended for trade purposes as contemplated by the Legal Metrology Act. IMPORTANT: QUOTATION CONDITIONS CLAUSE - 2.14.1 & 2.15 Provide, on request by the CCT, any other material that has a bearing on the quotation offer, the supplier#s commercial position (including joint venture agreements), preferencing arrangements, or samples of materials, considered necessary by the CCT for the purpose of the valuation of the quotation. If the Specifications require the supplier to provide samples/technical data sheets, these shall be provided strictly in accordance with the instructions set out in the Specification. If such samples /technical data sheets are not submitted as required in the bid documents or within any further time stipulated by the CCT in writing, then the bid concerned may be declared no n-responsive. NB!!! PLEASE ENSURE THAT YOU ATTACH THE TECHNICAL DATA SHEETS AND PICTURES OF THE ITEM QUOTED ON, TO YOUR RFQ SUBMISSION****FAILURE TO ADHERE TO THIS REQUIREMENT, MAY RESULT IN YOUR OFFER BEING NON-RESPONSIVE**** #Wherever reference is made to any particular Trade Mark, Name, Patent, Design, Type, Specific Origin or Producer, such reference shall be deemed to be accompanied by the words "or equivalent" #NB: The Municipal Bidding Document 6.1 (MBD 6.1) is attached, in order to be eligible for preference points bidders are required to submit a duly completed, current dated MBD 6.1 document with supporting documents with each and every RFQ submission, failure to submit will result in zero-point allocation. NB!!! Please note that the MBD document must be valid for a year. Please ensure that you attached an updated MBD document. ***PLEASE ENSURE THAT ALL REQUIRED INSURANCES SUCH AS YOUR PUBLIC LIABILITY, EMPLOYERS LIABILITY OR COIDA AND MOTOR VEHICLE INSURANCE ARE ATTACHED AND THAT THEY ARE UP-TO-DATE. IF YOU UTILISE COURIERS AND DO NOT HAVE MOTOR VEHICLE INSURANCE, THEN PLEASE MENTION THIS*** Tender Link : http://web1.capetown.gov.za/web1/ProcurementPortal/RFQ/Details/305132