Request For Quotation Acquisition Of Household Goods

The Type Of Tip Is Cross -Shaped Type Screwdriver Type, Constructive Features Of An Ergonomic Pen The Size Of The Tip Ph2 Screwdriver Length Of At Least 150.0 Mm Plastmass Handle Material, Rubber Rod Length, Mm At Least 150Mm, A Drill Of At Least 8X150x210 Mm Mm. , Diameter, Mm At Least 8.0 Mm Total Length, Mm At Least 210.0 Mm The Length Of The Working Part, Mm At Least 150.0 Mm Type Of Shank Sds-Plus The Diameter Of The Shank Is At Least 10.0 Mm Processed Material Concrete, Brick, Stone, Construction Nail At Least 80X3.5 Mm Packing Weight Type Construction Coating Zinc Length, Mm At Least 80.0 Mm Section, Mm At Least 3.5 Mm The Shape Of The Hat Is Flat Hat Diameter Of At Least 5.0 Mm Additionally, Construction Nails Are At Least 80 Mm, Plunger Syringe, Lever-Plunger, At Least 400 Cubic Meters. Cm At Least 700 Atm, The Purpose For Consistent Lubrication, The Type Of Lever -Plant, The Lubricant Capacity Is Not 400.0 Cubic Meters. Cm, Working Pressure Of At Least 700.0 Atm, Features Of Refueling With A Supercharger, Work With A Cartridge Of At Least 400 G, Professional, Equipment Is A Flexible Hose, Steel Tube,, Electrodes Along The Stainless Steel Tsl-11 Diameter, Mm: 2Mmm, A Drill Not Less Than 12X110x160 Mm Diameter, Mm At Least 12.0 Mm Total Length, Mm At Least 160.0 Mm The Length Of The Working Part, Mm At Least 110.0 Mm Type Of Shank Sds-Plus The Diameter Of The Shank Is At Least 10.0 Mm Processed Material Concrete, Brick, Stone, L7t Spark Plug Light Spark Plug For Gasoline Gasoline, A Drill Of At Least 6X110x160 Mm Mm. , Diameter, Mm At Least 6.0 Mm Type Of Drill Total Length, Mm At Least160.0 Mm The Length Of The Working Part, Mm At Least 110.0 Mm Processed Material Concrete, Bour Of At Least 16X160x210 Mm Diameter, Mm At Least 16.0 Mm Total Length, Mm At Least 210.0 Mm The Length Of The Working Part, Mm At Least 160.0 Mm Type Of Shank Sds-Plus Processed Material Concrete, Number In Packaging At Least1 Type Grinding Tape In Roll Length Of At Least 20,000.0 Mm Width Of At Least 200.0 Mm The Base Is Fabric Grain (P) 400, Graphite Lubricant (Gost 3333-80) A Bucket Of 18Kg, Packaging A Bucket, A General Purpose Lubrication; High -Skinned Oil Oil Thickened With Calcium Soap With The Addition Of 10% Graphite. The Main Operational Characteristics Of Graphite Lubrication: Operational At A Temperature Of -20 ... +70 ° C; It Is Allowed For Use At Temperatures Below -20 ° C In Springs And Similar Devices. Appearance And Color. Homogeneous Ointment From Dark Brown To Black The Temperature Of The Drip, ° C, At Least 77 Effective Viscosity, P.S (P), At 0 ° C, No More Than 100 (1000) At Least The Limit Of The Strength Of The Shift Pa (Kg/Cm2), At 50 ° C, At Least 100 (1.0) Penetration At 25 ° C With Mixing, Mm At Least 250 Colloidal Stability, %, Not More Than 5.0 Not Less Mass Fraction Of Water, %, Not More Than 3.0 At Least Corrosion Tests Withstands, Welding Inverter Maximum Electrode Diameter Of At Least 6 Mm. , The Minimum Diameter Of The Electrode Is Not Less Than 1.6 Mm, The Arc Breed, Anti -Infusing Yes, The Isolation Class H The Temperature Of The -20 To +50 Features Of Hot Startup Set 1. Welding Apparatus 2. Cable With An Electroder -Holder 3. Cable With Grounding Terminal 4. Packaging, Dimensions 315X150x285 Mm Weight 4.6 Kg. , Additionally A Guarantee Of 24 Months. The Degree Of Protection Is Not Less Than Ip21, The Presence Of A Network Fork- Yes, Case- No, Display- No, Product Class- Professional, Diameter Of The Electr/Wire 2.0-6.0/- Mm, Wire Length 1.8+1.2 M, Connector For The Welding Cable Dx25 Characteristics, Type Of Welding Inverter, Hand Welding Types (Mma), Welding Current (Mma) At Least 10-250 A, Maximum Welding Current (Mma) 250.0 A, Voltage At The Input140-260 V, Number Of Phases Of At Least 1, Idle Voltage Of At Least 85.0 V, Current Type Of Current, Operating Voltage Of At Least 220 B At Least 7.7 Kw, Duration Of Inclusion At Maximum Current, % Of At Least 70, Set Of Keys Combined At Least 26 Pcs Combined Type The Size Of The Key Is Not Less Than 6 Mm, At Least 7 Mm, At Least 8 Mm, At Least 9 Mm, At Least 10 Mm, At Least 11 Mm, At Least 12 Mm, At Least13 Mm, At Least 14 Mm, At Least 15 Mm, At Least 16 Mm, At Least 17 Mm, At Least 18 Mm, At Least 19 Mm, At Least 20 Mm, At Least 22 Mm, At Least 23 Mm, Not Less Than 24 Mm, Not Less Than 25 Mm, At Least 27 Mm, At Least 28 Mm, At Least 28 Mm, At Least 28 Mm, At Least 30 Mm, At Least 32 Mm, At Least 36 Mm, Not Less Than 41Mm Material Chromovanadium Steel The Number Of Keys Is At Least 26 Type Of Keys Set Type Of Packaging Bag, Construction Nail At Least 100X4 Mm Packing Weight Type Building Length, Mm At Least 100 Mm Cross -Section, Mm At Least 4 Mm Cap Shape Flat Diameter Of At Least 4 Mm, Welding Electrode, For Manual Arc Welding, Universal Purpose, Electrode 2.0 Mm Diameter, Electrode Length 30.0 Cm, Routine Coating Type, Contact Electrode Shape, Weight In One Package; 1.0 Kg