Bids Are Invited For Price Registration For Furniture Acquisition In General To Meet The Demand Of The Municipality Of Córrego Fundo/Mg.

High Steel Cabinet With 02 Open Doors: High Steel Cabinet, With Two Pivoting Doors, Endowed With 03 Shelves, 02 Being Removable And Adjustable And 01 Fixed, Mounted By Rivets Without The Use Of Welding. Product Prepared In Cold Steel Steel Sae 1010/1020. The Sides And Doors On Plate 24 (0, 60 Mm). Top, Base And Reinforcements In Plate 22 (0, 75Mm). Adjustable Shelves In Rack Print On Steel Sheets 22 (0, 75Mm). Door Locking Bars With A Minimum Diameter Of 6, 35Mm (1/4). Internal Hinges Not Visible On The Outside Of The Cold Rolled Steel Furniture 16 (1, 5 Mm). Non -Ferrous, Chrome Or Nickel Metallic Knob And Canopy With A Cremoner System Locking. Cylindrical Drum Lock Embedded In The Doorknob With At Least 4 Pins. Duplicate Duplicate Switches Attached To The Corresponding Door Handles. Affordable Edges To Users Should Be Rounded And Free Of Burrs And Should Not Present Cutting Points., Steel File With 04 Drawers - The Product Must Be Certified By Abnt, Meeting The Requirements Of Standard 13961: 2010. Steel File Vertical Type With 04 Sliding Drawers With The Following Configuration: Drawers Made Of 22 (0, 90Mm) Steel Sheet Thick, Formed By: Front Of The Drawer With The Suspended Paste Holder Holder. Structured Base For Union Of The Drawer Of The Drawers Moving Through Telescopic Slides Of At Least 45 Mm Wide With A Capacity Of 45 Kg/Pair. Cylindrical Lock With Simultaneous Drawing Of Drawers. 96Mm Strap Shaped Handles With Chrome Finish. Stimped Label Holder In Front Of The Drawer. The Finishing Of Folds In The File Corners Should Be Closing Without The Use Of External Welding Where The Union Of The Plates Are On The Sides With Cuts Made In 45 (Finish). 02 (Two) Internal Locking By Means Of A U In In Plate, Simple Shelf: Product Made Of Cold Rolled Steel Plate Sae 1010/1020. 06 (Six) Removable And Adjustable Shelves Measuring 920 Mm X 450 Mm Elaborated In 22 (0, 75 Mm) 2 (Two) 2 (2) Internal Reinforcements Omega, 24 (0, 60Mm) Thickness In All Its Length, With Long Bending To The Longitudinal. L -Profile Columns With 30Mm Tabs Made Of 20 (0, 90Mm Thick) Plate, With 8Mm Diameter Drilling, Vertically Arranged, Equidistant To 50Mm, Proposed To Allow The Height Adjustment Of Each Shelf, Also Allowing The Opening Variation Of The Spans. X Reinforcements At The Bottom And On The Sides, Made Of Plate 20 (0, 90Mm). Assembly By Screws (¼ X) And Nuts (¼) Both Zincaded And Heaven. Borders Accessible To Users Should Be Rounded And Free Of Burrs And Should Not Have Cutting Points. The Corners Of The Folds Should Contain Clippings For Relief, Avoiding Can, Shelf For Exposure: Steel Shelf, 2000Mm High, Closed On The Sides And Bottom Through Panels, With 5 Articulate Inclined Planes Being 3 Planes Of 820 X 350 Mm And 2 Planes With Measures Of 820 X 400 Mm And 6 (Six) Horizontal Shelves With Measurements Of 900 X 300 Mm, Forming 5 (Five) Frontal Spans For Exposure And 5 (Five) Posterior Spans For General Publications File. The Alignment And Positioning Device Of The Shelves Should Allow The M