Scissors According To Strabismus, Tc, Curved, 115 Mm. The Scissors Should Be On Metzenbaum (Modification), Preparation, Straight, Stupid, With Carbide Tungsten Inserts On Working Surfaces - The Presence. Mm Length Is At Least 145. The Color Coding Of The Handle Should Be Yellow - The Presence. The Composition Of The Material Is No Worse Than X20cr13. The Hardness Of The Material (According To The Rockwell Method; Hrc - 150 Kgf) Is At Least 42+8., Pinzet On Debakey, Atraumatic, Straight, 2 Mm, 150 Mm. The Tweezers Should Be On Debakey (Modification), Atraumatic, Straight - Availability. Mm Width Is Not More Than 2. Mm Length Is At Least 150, Should Be With A Flat Handle - The Presence. The Composition Of The Material Is No Worse Than X15cr13. The Hardness Of The Material (According To The Rockwell Method; Hrc - 150 Kgf) Is At Least 40+8. The Method Of Processing The Surface Of The Tool Should Be: Hardening, Polishing, Sandblasting - The Presence. The Tool Should Be Non -Sterile, Reusable - Availability., Needle Holder For Crile-Wood, Tc, Straight, With A Notch, 145 Mm. The Needle Holder Must Be On Crile-Wood (Modification), Straight, With Tungstrabs On Working Surfaces, With A Notch-The Presence. Mm Length Is At Least 145. It Should Be With Yellow Handles - The Presence. The Composition Of The Material Is No Worse Than X20cr13. The Hardness Of The Material (According To The Rockwell Method; Hrc - 150 Kgf) Is At Least 42+8. The Method Of Processing The Surface Of The Tool Should Be: Hardening, Polishing, Sandblasting - The Presence. The Tool Should Be Non -Sterile, Reusable - Availability., Casting On Castaneda, For Newborns, 48 Mm, 120 Mm, At An Angle Of 30 °. The Clamp Should Be On Castaneda (Modification), Vascular, For Newborns - The Presence. The Length Of The Branshees Mm Is At Least Branches 48. Mm Length Is At Least 120 Mm, Curved At An Angle Of Degrees Of At Least 30@, There Should Be An Atraumatic - The Presence. The Composition Of The Material Is No Worse Than X20cr13. The Hardness Of The Material (According To The Rockwell Method; Hrc - 150 Kgf) Is At Least 42+8. The Method Of Processing The Surface Of The Tool Should Be: Hardening, Polishing, Sandblasting Processing - Availability. There Must Be Non -Sterile, Reusable - Availability., The Needle Holder On Castroviejo, Durogrip, Smooth, 145 Mm. The Needle Holder Should Be On Castroviejo (Modification), Micro, Straight, With Carbide Carbide-Wolframa Inserts On Working Surfaces, Smooth, With A Flat Spring Handle-The Presence. Mm Length Is At Least 145, Should Be With Cremalor. The Composition Of The Material Is No Worse Than X20cr13. The Hardness Of The Material (According To The Rockwell Method; Hrc - 150 Kgf) Is At Least 42+8. The Method Of Processing The Surface Of The Tool Should Be: Hardening, Polishing, Sandblasting - The Presence. The Tool Should Be Non -Sterile, Reusable - Availability., The Needle Holder Diadust, Micro, With A Flat Handle, 185 Mm. The Needle Holder Should Be Micro, Straight, With A Diamond Coating Of Working Surfaces, Spring Type, With A Flat Handle, With A Lock - Presence. Mm Length Is Not Less Than 185, For Needles In Size Of At Least 5/0. There Must Be Non -Sterile, Reusable - Availability., The Clamp On Halsted, Micro, Delicate, Curved, 125 Mm. The Clamp Should Be According To Halsted (Modification), Micro, Hemostatic, Delicate, Curved - Presence. Mm Length Is At Least 125, It Should Be With Cremalor, The Notch On The Ends Is The Presence. The Composition Of The Material Is No Worse Than X20cr13. The Hardness Of The Material (According To The Rockwell Method; Hrc - 150 Kgf) Is At Least 42+8. The Method Of Processing The Surface Of The Tool Should Be: Hardening, Polishing, Sandblasting - The Presence. The Tool Should Be Non -Sterile, Reusable - Availability., Clamp On Gemini, Angular, 140 Mm. The Clamp Should Be According To Gemini (Modification), Prepared, Curved To The Right - Presence. Mm Length Is At Least 140. There Should Be Non -Sterile, Reusable - Presence., Steel Grid Cover, With Perforation, Standard 3/4, Length 410 Mm, Width 257 Mm. The Container Cover, The Internal Should Be, The Size Of The Standard 3/4, Red (Color Marking), With A Special Perforation And Fastening For The Filter (Reusable Or Disposable), With Handles -And -Beams - The Presence. External Dimensions: Mm Length Not More Than 460, Mm Width Of Not More Than 285, Mm Height Of Not More Than 36. It Should Be Used Complete With The Container Case And The Mesh Of The Corresponding Size - The Presence. It Should Be Intended For Sterilization (Steam Method), Storage And Transportation Of Surgical Instruments And Motor Systems In Conjunction With The Container Body And A Grid Of Steel Corresponding Size - The Presence. There Must Be Non -Sterile, Reusable - Availability. The Shelf Life Should Not Be Limited - The Presence., Supercut Scissors, Preparatory, Straight, 115 Mm. The Scissors Should Be Supercut, Childrens, Preparation, Delicate, Working Parts Delicate, Straight, Rounded, Stupid, With Particularly Sharp Blades, With A Notch On The Chamfer Against Fabric Slide, With Ring Hilt, Painted Black (Color Marking) - The Presence. The Total Length Of The Mm Tool Is At Least 115. They Must Be Made Of High -Quality Medical Steel - The Presence. The Composition Of The Material Is No Worse Than X50crmov15. The Hardness Of The Material (According To The Rockwell Method; Hrc - 150 Kgf) Is At Least 50+8. The Method Of Processing The Surface Of The Tool Should Be: Hardening, Polishing, Gross Cleaning - Availability. The Tool Should Be Non -Sterile, Reusable - Availability. Shelf Life: Should Not Be Limited - Availability., Clamp On Cooley, Bulldog, S-Shaped, 120 Mm. The Clamp Should Be On Cooley (Modification), Such As Bulldog, With A Round Handle, Curved, S-Shaped-Presence. Mm Length Is At Least 120. The Length Of The Branche Of Mm Is At Least 50. The Composition Of The Material Is No Worse Than The X20cr13. The Hardness Of The Material (According To The Rockwell Method; Hrc - 150 Kgf) Is At Least 42+8. The Method Of Processing The Surface Of The Tool Should Be: Hardening, Polishing, Sandblasting - The Presence. The Tool Should Be Non -Sterile, Reusable - Availability., Scissors According To Strabismus, Tc, Curved, 115 Mm. The Scissors Should Be According To Metzenbaum (Modification) Durotip, Childrens, Preparation, Delicate - Presence. The Working Parts Should Be Curved, Rounded, With Carbide Carbide With Tungsten Inserts (Plates) On Working Surfaces (Tunsgen Carbide), Stupid - The Presence. They Must Be With Annular Handles Marked Golden Color - The Presence. The Total Length Of The Mm Tool Is At Least 145. They Should Be Made Of High -Quality Medical Steel - The Presence. There Must Be Non -Sterile, Reusable - Availability. Shelf Life: Should Not Be Limited - Availability., Crile Clamp, Curved, 140 Mm. The Clamp Should Be On Crile (Modification), Hemostatic, Curved, Delicate, Straight - Presence. Mm Length Is At Least 140, Should Be With A Notch At The Tips. The Composition Of The Material Is No Worse Than X20cr13. The Hardness Of The Material (According To The Rockwell Method; Hrc - 150 Kgf) Is At Least 42+8. The Method Of Processing The Surface Of The Tool Should Be: Hardening, Polishing, Sandblasting - The Presence. The Tool Should Be Non -Sterile, Reusable - Availability., The Clamp On Halsted, Mosquito, Delicate, Curved, 125 Mm. The Clamp Should Be According To Halsted (Modification), According To The Type Of Mosquito, Hemostatic, Vascular, Delicate, Curved - Presence. Mm Length Is At Least 125, Should Be With A Notch At The Tips - The Presence. The Composition Of The Material Is No Worse Than X20cr13. The Hardness Of The Material (According To The Rockwell Method; Hrc - 150 Kgf) Is At Least 42+8. The Method Of Processing The Surface Of The Tool Should Be: Hardening, Polishing, Sandblasting - The Presence. The Tool Should Be Non -Sterile, Reusable - Availability., Scissors According To Metzenbaum, Noir, Wavecut, Curved, 145 Mm. The Scissors Should Be On Metzenbaum (Modification), Preparation, With A Special Notch Against Tissue Slipping, With A Special Coating (Tialn) In Black, With Microtomal Sharpening Blades And Tungsten -Sized Inserts On Working Surfaces, Delicate, Stupid, Curved - The Presence. Mm Length Is At Least 145. The Composition Of The Material Is No Worse Than X20cr13. The Hardness Of The Material (According To The Rockwell Method; Hrc - 150 Kgf) Is At Least 42+8. The Method Of Processing The Surface Of The Tool Should Be: Hardening, Polishing, Gross Cleaning - Availability. The Tool Should Be Non -Sterile, Reusable - Availability., Mixter Clamp, Children, Bent, 140 Mm. The Clamp Should Be According To Mixter (Modification), Childrens, Preparation, Bent - The Presence. Mm Length Is Not Less Than 140, Should Be In Commercial. There Must Be Non -Sterile, Reusable - Availability., Anatomical Tweezers, With A Notch, 145 Mm. Anatomical Tweezers Must Be Jagged - Presence. Mm Length Is At Least 145. The Composition Of The Material Is No Worse Than X15cr13. The Hardness Of The Material (According To The Rockwell Method; Hrc - 150 Kgf) Is At Least 40+8. The Method Of Processing The Surface Of The Tool Should Be: Hardening, Polishing, Sandblasting - The Presence. The Tool Should Be Non -Sterile, Reusable - Availability., Pinzet According To Adson, Tc, Atraumatic, 120 Mm. The Tweezers Should Be On Adson (Modification), Atraumatic, Straight, With Carbide Carbide With Tungsten Inserts/Plates On Working Surfaces - The Presence. Mm Length Is At Least 120, Should Be With A Cross -Shaped Notch At The Tips - The Presence. The Composition Of The Material Is No Worse Than X15cr13. The Hardness Of The Material (According To The Rockwell Method; Hrc - 150 Kgf) Is At Least 40+8. The Method Of Processing The Surface Of The Tool Should Be: Hardening, Polishing, Sandblasting - The Presence. The Tool Should Be Non -Sterile, Reusable - Availability., Scissors According To Iris, Tc, Straight, Pointed 110 Mm. The Scissors Should Be On Durotip, Surgical, Delicate, Working Parts Straight, Flat, With Carbide Carbide Tungsten Inserts (Plates) On Work Surfaces (Tunsgen Carbide), Pointed, With Ring Hilts, Marked Golden Color - The Presence. The Total Length Of The Mm Tool Is At Least 110. They Should Be Made Of High -Quality Medical Steel - The Presence. The Composition Of The Material Is No Worse Than X20cr13. The Hardness Of The Material (According To The Rockwell Method; Hrc - 150 Kgf) Is At Least 42+8. The Method Of Processing The Surface Of The Tool Should Be: Hardening, Polishing, Gross Cleaning - Availability. The Tool Should Be Non -Sterile, Reusable - Availability. Shelf Life: Should Not Be Limited - Availability., Scissors Micro, With A Round Handle, Pointed, 165 Mm, At An Angle Of 60 V.. The Scissors Should Be Micro, With A Round Spring Handle, Pointed, Delicate Tips - Presence. Mm Length Is At Least 165, Curved At An Angle Of Degrees Of At Least 60 °. The Composition Of The Material Is No Worse Than The X40cr13. The Hardness Of The Material (According To The Rockwell Method; Hrc - 150 Kgf) Is At Least 50+8. The Method Of Processing The Surface Of The Tool Should Be: Hardening, Polishing, Gross Cleaning - Availability. The Tool Should Be Non -Sterile, Reusable - Availability., Expand For Vein, 10 Mm, 13 Mm, 160 Mm. The Extensor For The Vein Should Be One -Sided, The Depth Mm Is No More Than10, The Width Of The Mm Is Not More Than 13, It Should Be With A Flat Handle - The Presence. The Total Length Of Mm Is Not More Than 160. The Composition Of The Material Is No Worse Than X20cr13. The Hardness Of The Material (According To The Rockwell Method; Hrc - 150 Kgf) Is At Least 42+8. The Method Of Processing The Surface Of The Tool Should Be: Hardening, Polishing, Sandblasting - The Presence. The Tool Should Be Non -Sterile, Reusable - Availability., The Needle Holder Diadust, Micro, With A Flat Handle, 170 Mm. The Needle Holder Should Be In Diadust, Microsurgical, Straight - Presence. The Working Parts Should Be Straight With A Coating Of Diamond Crumbs (Diadust) - The Presence. The Handle Should Be A Spring Flat, With Longitudinal Notches, With A Lock, The Springs Are Marked With Gold - The Presence. The Total Length Of Mm Is At Least 170. It Should Be Intended For Use With Suture Material In Size Up To At Least 7/0. There Must Be Non -Sterile, Reusable - Availability., The Needle Holder In Mayo-Hegar, 160 Mm. The Needle Holder Should Be On Mayo-Hegar (Modification), Straight, With A Notch At The Working Tips-The Presence. Mm Length Is At Least 160. There Should Be Non -Sterile, Reusable - Presence. The Composition Of The Material Is No Worse Than X20cr13. The Hardness Of The Material (According To The Rockwell Method; Hrc - 150 Kgf) Is At Least 42+8. The Method Of Processing The Surface Of The Tool Should Be: Hardening, Polishing, Sandblasting - The Presence., Clime On Debakey, Bulldog, With A Handle, 105 Mm, At An Angle Of 90º. The Clamp Should Be By Debakey (Modification), Atraumatic, By The Type Of Bulldog, With A Round Handle, The Total Length Of Mm At Least 105, Curved At An Angle Of Degrees Of At Least 90 ° - The Presence. The Length Of The Branchei Mm Is At Least 53. The Composition Of The Material Is No Worse Than X20cr13. The Hardness Of The Material (According To The Rockwell Method; Hrc - 150 Kgf) Is At Least 42+8. The Method Of Processing The Surface Of The Tool Should Be: Hardening, Polishing, Sandblasting - The Presence. The Tool Should Be Non -Sterile, Reusable - Availability., Scissors On Mayo, Tc, Straight, 140 Mm. The Scissors Should Be On Mayo (Modification) Durotip, Preparations, Working Parts Straight, Beveled, With Carbide Carbide With Tungsten Inserts (Plates) On The Working Surfaces (Tunsgen Carbide), Stupid, With Ring Hilt, Marked With Golden Color - The Presence. The Total Length Of The Mm Tool Is At Least 140. They Should Be Made Of High -Quality Medical Steel - The Presence. The Composition Of The Material Is No Worse Than X20cr13. The Hardness Of The Material (According To The Rockwell Method; Hrc - 150 Kgf) Is At Least 42+8. The Method Of Processing The Surface Of The Tool Should Be: Hardening, Polishing, Gross Cleaning - Availability. The Tool Should Be Non -Sterile, Reusable - Availability. Shelf Life: Should Not Be Limited - Availability., Expand For Finochietto, Childrens, Rib, Aluminum. The Expander Should Be On Finochietto (Modification), Childrens, Rib, Aluminum, Frame - Presence. Mm Length Is At Least 70, Mm Width Of At Least 100, Should Be With The Dimensions Of Mm With The Dimensions Of At Least 12 By 15 To 15 To 15. The Composition Of The Material Is Not Worse Than The X20cr13. The Hardness Of The Material (According To The Rockwell Method; Hrc - 150 Kgf) Is At Least 42+8. The Method Of Processing The Surface Of The Tool Should Be: Hardening, Polishing, Sandblasting - The Presence. There Must Be Non -Sterile, Reusable - Availability., Scissors According To Strabismus, Tc, Curved, 115 Mm. The Scissors Should Be On Durotip, Preparation, Delicate - Availability. The Working Parts Should Be Curved, Rounded, With Carbide Carbide With Tungsten Inserts (Plates) On Working Surfaces (Tunsgen Carbide), Stupid - The Presence. They Must Be With Annular Handles Marked Golden Color - The Presence. The Total Length Of The Mm Tool Is At Least 115. They Must Be Made Of High -Quality Medical Steel - The Presence. The Composition Of The Material Is No Worse Than X20cr13. The Hardness Of The Material (According To The Rockwell Method; Hrc - 150 Kgf) Is At Least 42+8. The Method Of Processing The Surface Of The Tool Should Be: Hardening, Polishing, Gross Cleaning - Availability. The Tool Should Be Non -Sterile, Reusable - Availability. Shelf Life: Should Not Be Limited - Availability., The Grid Is Steel, With Perforation, Standard 3/4, Length 406 Mm, Width 253 Mm, Height 56 Mm. It Should Be Made Of High -Quality Aluminum Alloy - Availability. There Must Be Non -Sterile, Reusable - Availability. The Shelf Life Should Not Be Limited - The Presence., Clime On Crile, Childish, Delicate, Curved, 140 Mm. The Clamp Should Be On Crile (Modification), Atraumatic, Vascular, Childish, Delicate, Curved, Stupid - The Presence. Mm Length Is At Least 140, There Should Be A Notch At The Tips - The Presence. The Composition Of The Material Is No Worse Than X20cr13. The Hardness Of The Material (According To The Rockwell Method; Hrc - 150 Kgf) Is At Least 42+8. The Method Of Processing The Surface Of The Tool Should Be: Hardening, Polishing, Sandblasting - The Presence. The Tool Should Be Non -Sterile, Reusable - Availability., The Needle Holder Is Ryder, Tc, X-Dykatnaya, With A Notch, 135 Mm. The Needle Holder Should Be According To Ryder (Modification), Durogrip Tc, Very Delicate, Straight, With A Notch In Mm Not More Than 0.2 And With Carbide Carbide Inserts On Working Surfaces - The Presence. The Size Of The Size In The Range Should Not Be Suitable For The Suture Material From 6/0 To 10/0. The Total Length Of Mm Is At Least 135. The Composition Of The Material Is No Worse Than X20cr13. The Hardness Of The Material (According To The Rockwell Method; Hrc - 150 Kgf) Is At Least 42+8. The Method Of Processing The Surface Of The Tool Should Be: Hardening, Polishing, Sandblasting - The Presence. The Tool Should Be Non -Sterile, Reusable - Availability., Scissors According To Metzenbaum, Childrens, Delicate, Straight, 145 Mm. The Scissors Should Be According To Metzenbaum (Modification), Preparation, Childrens, Delicate, Straight, Stupid - Presence. Mm Length Is At Least 145. The Composition Of The Material Is No Worse Than X50crmov15. The Hardness Of The Material (According To The Rockwell Method; Hrc - 150 Kgf) Is At Least 50+8. The Method Of Processing The Surface Of The Tool Should Be: Hardening, Polishing, Gross Cleaning - Availability. The Tool Should Be Non -Sterile, Reusable - Availability., Click On Hartmann, Mosquito, Delicate, Curved, 100 Mm. The Clamp Should Be According To Hartmann (Modification), Mosquito (Type), Hemostatic, Delicate, Curved - Presence. Mm Length Is At Least 100, It Should Be With Cremalor, With A Notch On The Ends - The Presence. The Composition Of The Material Is No Worse Than X20cr13. The Hardness Of The Material (According To The Rockwell Method; Hrc - 150 Kgf) Is At Least 42+8. The Method Of Processing The Surface Of The Tool Should Be: Hardening, Polishing, Sandblasting - The Presence. The Tool Should Be Non -Sterile, Reusable - Availability., Cooping On Cooley, Vascular, 1.5 Mm, 150 Mm. The Clamp Should Be On Cooley (Modification), Atraumatic, Vascular, Straight - Availability. Mm Width Is Not More Than 1.5 - Availability. Mm Length Is At Least 150 Mm. The Composition Of The Material Is No Worse Than X20cr13. The Hardness Of The Material (According To The Rockwell Method; Hrc - 150 Kgf) Is At Least 42+8. The Method Of Processing The Surface Of The Tool Should Be: Hardening, Polishing, Sandblasting - The Presence. The Tool Should Be Non -Sterile, Reusable - Availability., Mannerfelt Hook, Saddle, 12 Mm, 12 Mm, 155 Mm. The Hook Should Be On Mannerfelt (Modification), Sad, With A Triangular Handle - The Presence, Depth Of Mm Is Not More Than 12, Width Of A Mm Of Not More Than 12. Mm Length Is At Least 155 Mm. The Composition Of The Material Is No Worse Than X20cr13. The Hardness Of The Material (According To The Rockwell Method; Hrc - 150 Kgf) Is At Least 42+8. The Method Of Processing The Surface Of The Tool Should Be: Hardening, Polishing, Sandblasting - The Presence. The Tool Should Be Non -Sterile, Reusable - Availability., Pinzet On Wangensteen, Tc, 150 Mm. The Tweezers Should Be On Wangensteen (Modification), With A Tungsten Carbide, An Atraumatic, A Straight Line - The Presence. Mm Length Is At Least 150, Should Be With A Cross -Shaped Notch On The Working Surface - The Presence. The Composition Of The Material Is No Worse Than X15cr13. The Hardness Of The Material (According To The Rockwell Method; Hrc - 150 Kgf) Is At Least 40+8. The Method Of Processing The Surface Of The Tool Should Be: Hardening, Polishing, Sandblasting - The Presence. The Tool Should Be Non -Sterile, Reusable - Availability., The Probe Is Bilateral, 1 Mm, 145 Mm. The Probe Should Be Bilateral, The Diameter Of Mm Is Not More Than 1. Mm Length Is At Least 145. The Composition Of The Material Is No Worse Than X20cr13. The Hardness Of The Material (According To The Rockwell Method; Hrc - 150 Kgf) Is At Least 42+8. The Method Of Processing The Surface Of The Tool Should Be: Hardening, Polishing, Sandblasting - The Presence. The Tool Should Be Non -Sterile, Reusable - Availability., Pinzet On Adson, With A Notch, 120 Mm. The Tweezers Should Be On Adson (Modification), Micro, With A Notch - The Presence. Mm Length Is At Least 120. The Composition Of The Material Is No Worse Than X15cr13. The Hardness Of The Material (According To The Rockwell Method; Hrc - 150 Kgf) Is At Least 40+8. The Method Of Processing The Surface Of The Tool Should Be: Hardening, Polishing, Sandblasting - The Presence. The Tool Should Be Non -Sterile, Reusable - Availability., A Filter For A Standard Container, Reusable. The Steel Grid Should Be, With Perforation, With Legs Made Of Heat -Resistant Plastic, The Size Of The 3/4 Standard, With Handles - The Presence. External Size: Mm Length At Least 406, Mm Width Of At Least 253, Mm Height Of At Least 56; Internal Dimensions (Beneficial Space): Mm Length At Least 404, Mm Width Of At Least 251, Mm Height At Least 42. It Should Be Intended For Sterilization (Steam Method), Storage And Transportation Of Surgical Tools And Motor Systems In The Complex With The Container Body And The Lid Of The Container Of The Corresponding Size - The Presence. It Should Be Made Of High -Quality Medical Steel - Availability. There Must Be Non -Sterile, Reusable - Availability. The Shelf Life Should Not Be Limited - The Presence., The Needle Holder For Halsey, Delicate, Smooth, 130 Mm. The Needle Holder Must Be On Halsey (Modification), Straight, Delicate, Smooth - Presence. Mm Length Is At Least 130. The Composition Of The Material Is No Worse Than X20cr13. The Hardness Of The Material (According To The Rockwell Method; Hrc - 150 Kgf) Is At Least 42+8. The Method Of Processing The Surface Of The Tool Should Be: Hardening, Polishing, Sandblasting - The Presence. The Tool Should Be Non -Sterile, Reusable - Availability., Container Case, Standard 3/4, Height 90 Mm. The Container Case Should Be, The Size Of The 3/4 Standard, Without Perforation (For The Filter) At The Bottom, With Special Cells For Identification Tablets, Paper Identifier, Seal For Monitoring Sterility, With Handles For Convenient Transportation - Availability. External Dimensions Without A Container Cover: Mm Length Not More Than 470, Mm Width Of Not More Than 274, Height Mm Not More Than 90; The External Dimensions Are Included With The Container Lid: Mm Length Is Not More Than 470, The Width Of Mm Is At Least 281, The Mm Height Is Not More Than 107; The Internal Dimensions In The Kit With The Container Lid (Beneficial Space): Mm Length Of At Least 421, Mm Width Of At Least 258, Mm Height Of At Least 75., The Needle Holder In Mayo-Hegar, Tc, Very Jagged, 150 Mm. The Needle Holder Should Be On Mayo-Hegar (Modification), Very Jagged, With A Notch Mm No More Than 0.5, Should Be With Carbide Tungsten Inserts On Work Surfaces, Straight-The Presence. Mm Length Is At Least 150, Should Be Intended For Suture Material With A Size Of Not More Than 3/0. There Must Be Non -Sterile, Reusable - Availability., Pinzet On Debakey, Atraumatic, Straight, 1.5 Mm, 200 Mm. The Tweezers Should Be On De Bakey (Modification), Atraumatic, Straight - Availability. The Width Of The Tips Mm Is Not More Than 1.5, The Total Length Of The Mm Tool Is At Least 200, It Should Be With A Flat Handle - The Presence. The Composition Of The Material Is No Worse Than X15cr13. The Hardness Of The Material (According To The Rockwell Method; Hrc - 150 Kgf) Is At Least 40+8. The Method Of Processing The Surface Of The Tool Should Be: Hardening, Polishing, Sandblasting - The Presence. The Tool Should Be Non -Sterile, Reusable - Availability., The Clamp On Adson, Micro, Ligated, Curved, 140 Mm. The Clamp Should Be On Adson (Modification), Micro, Ligated, Curved - Presence. Mm Length Is At Least 140. There Should Be Non -Sterile, Reusable - Presence., Пинцет По Debakey, Атравматический, Прямой, 1,5 Мм, 150 Мм. Пинцет Должен Быть По Debakey (Модификация), Атравматический, Прямой – Наличие. Ширина Кончиков Мм Не Более 1,5 – Наличие. Длина Мм Не Менее Мм Не Менее 150. Состав Материала Не Хуже X15cr13. The Hardness Of The Material (According To The Rockwell Method; Hrc - 150 Kgf) Is At Least 40+8. The Method Of Processing The Surface Of The Tool Should Be: Hardening, Polishing, Sandblasting - The Presence. The Tool Should Be Non -Sterile, Reusable - Availability., The Needle Holder On Castroviejo, Durogrip, With A Notch, 0.2 Mm, 145 Mm. The Needle Holder Should Be On Castroviejo (Modification), Micro, Straight, With Carbide With Tungsten Inserts On Working Surfaces, With Flat Spring Handles, With A Mm Notch Of No More Than 0.2 - Presence. Mm Length Is At Least 145. It Should Be Intended For Suture Material In The Size Of The Range From 6/0 To 10/0. There Must Be Non -Sterile, Reusable - Availability., The Needle Holder In Baumgartner, With A Notch, 145 Mm. The Needle Holder Must Be According To Baumgartner (Modification), Straight, With A Notch - The Presence. Mm Length Is At Least 145. The Composition Of The Material Is No Worse Than X20cr13. The Hardness Of The Material (According To The Rockwell Method; Hrc - 150 Kgf) Is At Least 42+8. The Method Of Processing The Surface Of The Tool Should Be: Hardening, Polishing, Sandblasting - The Presence. The Tool Should Be Non -Sterile, Reusable - Availability., Clime On Cairns, Curved, 150 Mm. The Clamp Should Be On Cairons (Modification), Hemostatic, Curved, Delicate, Dumb - The Presence. Mm Length Is At Least 150, Should Be With A Notch On The Tips - The Presence. The Composition Of The Material Is No Worse Than X20cr13. The Hardness Of The Material (According To The Rockwell Method; Hrc - 150 Kgf) Is At Least 42+8. The Method Of Processing The Surface Of The Tool Should Be: Hardening, Polishing, Sandblasting - The Presence. The Tool Should Be Non -Sterile, Reusable - Availability., The Clamp On Halsted, Micro, Delicate, Curved, 125 Mm. The Clamp Should Be According To Halsted (Modification), Micro, Hemostatic, Delicate, Curved - Presence. Mm Length Is At Least 125, There Should Be A Notch On The Tips, With Cremalus - The Presence. The Composition Of The Material Is No Worse Than X20cr13. The Hardness Of The Material (According To The Rockwell Method; Hrc - 150 Kgf) Is At Least 42+8. The Method Of Processing The Surface Of The Tool Should Be: Hardening, Polishing, Sandblasting - The Presence. The Tool Should Be Non -Sterile, Reusable - Availability., Крышка Контейнера, Стандарт 3/4, Красная. It Should Be Intended For Sterilization (Steam), Storage And Transportation Of Surgical Tools And Motor Systems Complete With The Container Lid And A Grid Of Steel Corresponding Sizes -A Linen., Clime On Debakey, Bulldog, With A Handle, 125 Mm, At An Angle Of 45º. The Clamp Should Be On Debakey (Modification), The Type Bulldog, Atraumatic, Vascular - The Presence. Mm Length Is At Least 125, Curved At An Angle Of Degrees At Least 45 ° - The Presence. The Length Of The Branchei Mm Is At Least 53. The Composition Of The Material Is No Worse Than X20cr13. The Hardness Of The Material (According To The Rockwell Method; Hrc - 150 Kgf) Is At Least 42+8. The Method Of Processing The Surface Of The Tool Should Be: Hardening, Polishing, Sandblasting - The Presence. The Tool Should Be Non -Sterile, Reusable - Availability.
