Tenders Are Invited For Provision Of Well Plug And Abandonment (P&A) Service To Support Jv Asset Retirement Operation (Jv)

Tender Detail

96724706
CNL.000000331
Self-Funded
Tenders Are Invited For Provision Of Well Plug And Abandonment (P&A) Service To Support Jv Asset Retirement Operation (Jv)
NCB
Western Africa
Economic Community of West African States, ECOWAS,African Union
28-05-2025

Work Detail

Tenders are invited for Provision of Well Plug and Abandonment (P&A) Service to Support Jv Asset Retirement Operation (Jv) SCOPE OF WORK: The scope of work covered under this tender includes but is not limited to the following: To Plug and abandon selected idle JV Wells utilizing the right mix of resources Equipment and Personnel To Provide an integrated P&A services that is inclusive of ancillary services such as on an integrated basis including with tubing and casing cutting and pulling capabilities, Cementing Services, Slickline Services, Electric Line Services, hydraulic workover unit operation (HWOU Services), Logging Services, (E.g. CBL), sand clean out require for cleaning the sand out of the well and well abandonment and well abandonment, Coil Tubing Services, Specialty Barges for Onshore Work, Expendables and all Other Items Required to Provide the Services. All work will be carried out consistently with the Companys current safety and environmental policies as detailed in Exhibit D below: a. Contractor will perform the services for the joint venture between Company and the Nigerian National Petroleum Corporation (NNPC). Contractor must have established base facilities in Warri or Port Harcourt for the handling of HWOU Services. b. Contractor HWOU Services shall include but is not limited to: c. Furnish for a 24-hour operation a certified 460K Hydraulic Workover Unit, tools and equipment listed under the contract to enable the performance of the following jobs in deviated, straight and horizontal wells: pulling of completion strings, well killing, fishing, milling, cementing, and well abandonment and related ancillaries. Equipment shall include the equipment needed for the jobs and to rig up onto the Company wellhead. All crossover and flanged connections be included and should be supplied by the contractor. All equipment must be pre-slung and certified. d. Furnish the following with certification: Jack with lift capacity of 460,000 lbs Rotary table rated 20,000 ft-lbs Work basket with remote BOP control panel Jack base basket Window basket Annular BOP Hydril rated 5000 psi working pressure. 11 Double ram BOP rated 5000 psi Accumulator unit with nitrogen bottles charged to 3000 psi 30 bbls Trip tank duly calibrated. PVT available at Third Party Vendor Specialist Documented Cost plus 10% Handling fee. Standpipe rated 5000 psi Mud storage tank (with combined capacity of 700 bbls of water=244608 lbs) including additional storage which may include available storage in the SEWOP. Centrifugal and Mud pumps rated 5000 psi. Mud pump skids must include real time data acquisition package capable of tracking rate, pressure, and volume (at a minimum) 100 bbls Flowback tank Choke Manifold coupled with kill manifold rated 5000 psi. Surface pumping iron and flowback iron. Pumping iron should be 2 10,000 psi working pressure with fig 1502 10M connections. Flowback iron should be 3 5000. 3. MANDATORY TENDER REQUIREMENTS: A. To be eligible for this tender exercise, interested bidders are required to be pre-qualified and live in the 3.15.04 (Asset Retirement, Waste Management Services) category in NipeX Joint Qualification System (NJQS) database. All successfully pre-qualified and live bidders in this category by the bid close date will receive Invitation to Tender (ITT). B. To determine if you are pre-qualified and to view the product/service category you are listed for: Open www.vendors.nipex-ng.com and access NJQS with your log in details. Click on Products/Services tab to view your status and product codes. C. If you are not listed in the product/service category and you are registered with NUPRC to do business in this category, please contact NipeX office at 27b Oyinkan Abayomi Drive, Ikoyi Lagos with your NUPRC certificate (formerly called DPR Certificate) as evidence for verification and necessary update CLOSE DATE: Only bidders who are pre-qualified and live with NJQS Product/Service Category 3.15.04 (Asset Retirement, Waste Management Services) by 16:00 Hours, May 28, 2025, being the advert close date shall be invited to submit technical and commercial bid. Tender Link : https://etenders.com.ng/chevron-nigeria-limited-invitation-to-tender-for-provision-of-well-plug-and-abandonment-pa-service-to-support-jv-asset-retirement-operation-jv/

Key Value

Tender Value
Refer document

Attachment

FileName File Description
Global Tender Document 25223418-e70f-460d-ac18-b9a969cc5640.html
Attachments
Additional Details Available on Click
✓ Tendering Authority
✓ Publication Document
(Tender Document / Tender Notice )
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2025 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail