Tenders Are Invited For Construction Of An Elevator Shaft With A Passenger Elevator In The Building Of The District Court In Kluczbork At Ul. Maria Skłodowska-Curie 15

1. The Subject Of The Order Are Construction Works Including: Construction Of An Elevator Shaft With A Passenger Elevator. Construction Of An Elevator Shaft With A Passenger Elevator In The Building Of The District Court In Kluczbork At Maria Skłodowska -Curie 15 Street Constituting The Subject Of The Contract Will Be Completed In An Active Building, Covered By The Decision On The Building Permit - Decision No. 1/52/2024 Of 17.06.2024 2. Description Of The Subject Of The Contract: 2.1. A Detailed Description Of The Subject Of The Contract Including: Scope, Characteristics Of Works And Technical Parameters, Was Specified In The Design Documentation And In The Pre -Emptive Of Works. The Bill Of Quantities Is An Auxiliary Document For The Valuation Of The Offer. 2.2. The Scope Of Works Specified In The Detailed Description Of The Work Includes, Among Others: - Necessary Forging, Demolition And Puncture When Making A Shaft And Assembly Of A Passenger Lift; - Disassembly Of The Existing Smoke Flap And A Part Of The Roof Truss At The Windshield Site; - Cleaning For The Circuits Of Electrical Power Installation, Lighting And Control Of The Passenger Lift; Building; - Masonry, Carpentry And Locksmith Works When Making A Elevator Shaft; - Supplementing The Ceiling Of The Klein; - Making A New Structure And Roof Covering At The Wind Shaft Place; - Re -Assembly Of The Existing Smoke Flap With Connection; - Re -Assembly Of All Dismantled Installations; - Restoration Of Floors At The Windshield; Foundations Made; - Replacement Of The Lightning Protection System On The Roof; - Execution Of Electrical Installations; - Execution Of Measurements Of The Electrical Installation Together With Test Reports And Checking Of The Installation Of Circuits And Power Installations, Lighting And Control Of A Passenger Crane; - Division Of The Existing Office Room, Including The Break Of New Door Openings; - Transfer Of Devices And Perhaps The Existing Building Monitoring Station To New. A Separate Room; - Disassembly Of The Existing Radiator And Assembly Of A New On The Ground Floor Of The Building; - Assembly Of New Doors D1 (Eis30) And D2; - Delivery Of A Complete Passenger Crane To The Construction Site With Unloading; - On Each Floor, Making Finishing Machining Adapted To The Setting Decor (Plasters, Tiles, Painting, Etc.); - Assembly And Starting A Passenger Lift. The Passenger Crane Should Be Equipped With All Necessary Devices Required By The Provisions Specifying Their Work Together With Attached Documents And Operational Documentation Needed To Obtain A Decision On Allowing A Passenger Crane For Use By The Office Of Technical Inspection. The Requirement Of The Ordering Party Is That: Control, Call Cassettes, Disposition Panel, Cabin And Shaft Doors, A Cabin With A Cabin Frame, A Counterweight Frame, A Winchs Foundation And A Speed Limiter Of The Speed Limiter Must Come From One Manufacturer. 2.3. During The Implementation Of Works, The Contractor Will Keep The Rooms