Tenders Are Invited For Ventilation And Air Conditioning Installation Work-Ventilation Work

Ventilation And Air Conditioning Installation Work-Ventilation Work. New Building Kita Ernst-Fahlbusch Ernst-Fahlbusch-Straße 24/37077 Göttingen ## ## The Building To Be Built Is The Construction Of A New Daycare Center In The Northern Area Of ​​The Weende District Of Götting. The Construction Project Is Located In 37077 Göttingen, Ernst-Fahlbusch-Straße. The Property Is Located At The Interface Of Residential Buildings In The North And A School -Shaped Area In The South. The Rectangular Building Plot Is Limited One-Sided (West) By Ernst-Fahlbusch-Straße And Three Sides By Neighboring Properties With Development. Construction It Is A 1 To 2-Storey Building With A Shed Roof And Flat Roof (Under The Terraces). The Mensor Terrace Is Designed As A Raised, Well -Ventilated Wooden Terrace On Drilling Foundations. The Ventilation Of The Rooms Is Divided According To The Individual Parts Of The Building. Four Room Air-Technical Systems (Rlt Systems) Are Installed. Some Rooms Receive Supply And Exhaust Air Openings. Other Rooms Are Trained As Supply Rooms (Group Rooms) And As Exhaust Air Dreams (Sanitary Areas, Corridors, Wardrobes) And Form An Air-Technical Network With Overflowing Of The Air From The Supply Air To The Exhaust Air. ## The Three Northern Parts Of The Building Each Receive A Ventilation Device Assigned To The 3 Groups, Which Is Set Up In The Pointed Roof Over The Sanitary Areas. The External Air / Advanced Air Supply Is Via The Roof Via An Inclined Roof Weather Protection Grille. The Individual Areas Are Opened Up Using Ventilation Lines. ## As Air Outlets, Tellerventiles, Slot Throughlets For Wall And Ceiling Installation As Well As Swimming Through The Kitchen Area Are Used. All Ventilation Devices Receive Filters, Heat Recovery And A Hot Water Heat Transformer To Heat Up. These Heat Transferors Are Connected To The Heating Network Of The Heat Pump Via A Separate Heating Circuit. For The Air Ducts, Channels In Square Design And Round Pipes Made Of Sheet Steel Are Used. These Are Insulated Against Sweating Water During The External And Advanced Air Lines. In The Ventilation Pipes, Cleaning Openings Must Be Provided At Regular Intervals. It Should Be Noted To Comply With The Fire Protection Requirements For The Wall And Opaque Leaders. The Special Solid Wood Construction Requires Approved Implementations. Essential Execution Work: #- 4 Pieces Of Supply And Exhaust Air Devices With Heat Recovery 1,170 M³/H To 3,830 M³/H For The Interior For The Ventilation For The Ventilation Common Rooms, Showers, Toilet Rooms #- 8 Pieces At An Angle Of Weather Protection Up To 940 X 919 Mm #- 15 Piece Protection Flaps With Fire Protection Folding Control #- 54 Pieces Of Rohrchallshmfer Dn 100 To Dn 315 #- 18 Pieces Of Backdrops Up To 500X600x1000 #- 36 Pieces Of Mechanical Volume Current Controller #- 137 M Round Tube System Dn 200 To Dn 224 #- 22 M Ceiling Slot Outlet #- 20 M Wall Slit Outlet #- 6 Pieces Of Covering The Nw 400 And 500 Mm #- 32 Pieces Tellerventile Dn 100 To Dn