Childrens Bookcase For Books - Simple Childrens Facher Simple Book Face Shelf, Made Of Low Decarbon Stood. Composed By: 03 Shelvesplanes, 01 Closed Rectangular Base, 01Straveisa Upper And 02 Sides. 03Pratelars With Dimensions Of 99, 8 Cm Decomposing And 23, 5 Cm Deep, Made Of 0, 90Mm Aidssessure Sheet, With Naslateral Folds That Allow Them To Union Aslateral By The Fitting System (Semparaphuses). 01 Horizontal Superior Travessa (Chapeu), Made Of 0, 90Mm Edobrate In U With Height Of 07 Cm, 02Stops In Plate 1, 50Mm Soldy Switch And Fixed On The Sides Of The 04 Screws M8 On Each Side. 01 Used Closed Rectangular Base Made They Have A Thickness Plate 0, With 16, 5 Cm; 02 Base Sideways To The Base And Fixed On The Sides Of The Daestant By 04 M8 Screws Of The Side. 02 Sides That Unite In A Unique Sin Both The Function Of Supporting That Of Beautification, Contains Reinforcement Rearnguages To The Ends, Also Responsible For The Sinning Of The Sin, The Deposit Of Objects, Proliferation Of Fungi, Insects And Dirt Accumulode, Has A Threaded Riven Of Threading, Which Allows The Fixation Of The Fixation. Basee Hat Without Using Nuts That Make Up Over Time; Both Made They Are Slate 1, 50Mm, With The Upper 7 Cm High To Receive The Lower Chapeue With 16, 5 Cm High To Stop The Base, The Sides Saoconfected With 1, 20Mm, Height Of 148 Cm And Width Of 32 Cm, Rounded With Cutting And Rigid Internal Finishing, With 45 Angulating, Fixed Fittings. Each Side Contains 12Ths With 2, 8 Cm Tall, 5 Cm Width, Which Stiffen Alateral, Ensure Stability Of The Shell Allow The Trays In Steps 17, 5 Cm. Base Of The Sides With Nylon Hexisters Levels That, Mobile Bookshelf Books, Double -Sided Book Shelf (Access On Both Sides). Composed Of: 06 Shelves With Dimensions Of 99, With Naslateral Folds That Allow Them To Union Aslateral By The Fitting System (Semparaphuses). 01 Closed Rectangular Base Made Of 0. Comespesure Sheet Of 0, With Height Of 175 Mm; 01 Omega Internal Reinforcement Soldadoconfected In Plate 1, 50 Mm; 02 Laterals Welded To The Base Ephixed On The Sides Of The Shelf By 04 M8 Bolts On Each Side. 01 Horizontal Travesses (Hall), Made Of Plate 0, 90Mm And Folded In U With Minimum 70 Mm Height, Made Of Plate0, 90Mm; 02 Sides In Plate1, 50Mm Soldiers To Upper Platter Ephixed On The Sides Of The Shelf By 04 M8 Bolts On Each Side. 02 Sides That Unite In A Single Sin Both The Sustainment And Beautification, Contain Rectangular Reinforcements Wesening The Excremities, Also Responsible For The Refinement Of The Sake That Implies The Deposit Of Dirty Dirt, Has Piercing With Hexagon Rivet Revenue Embedded, Which Allows The Basic And Slat Fixes Using Nuts That Loosen Over Time; Both Upheld On A Female Plate 1, The Upper Senior Being 7 Cm High To Stop The Hat And The Bottom 17, 5 Cmde Height To Receive The Base, The Sidelines Made In A 1, Height Of 148 Cm And 58 Cm Width, Fixed Fittings. Here
