The Stand For The Bench Press Lying With A Horizontal Bench, The Bar For The Bench Press Is Designed To Efficiently Study The Muscles Of The Breast Using A Horizontal Bench. Equipped With Adjustable Holders For The Neck And Safety Stops, Racks Provide Safe Exercises. The Safety Stops And Holders For The Rod Are Attached To The Frame Using Hooks, Which Adds Amenities In Adjustment. The Supporting Structure Is Made Of A 60X80 Mm Profile With A Wall Thickness Of 2 Mm. The Frame Is Covered With Powder Dye For Protection And Durability. The Seat Is Made Of Plywood 18 Mm Thick On A Steel Base. As A Filler, Foam Polyurethane Foam Is Used, And The Upholstery Is Made Of Artificial Leather. All End Units Are Protected By Pvc-Beams, And Plastic Anti-Slip Bloodsters Provide Stability On The Surface. The Handles Of The Simulator Have A Rubber Coating For A Convenient Grip. Congland With Customer 87089154006, The Design Of A Closed -Type Bearing In Mobile Parts Provides Smoothness Even With Asymmetric Loads. The Bench For The Bench Press Is Equipped With High -Strength Steel Guides, Which Guarantees High Reliability And Durability Of Professional Equipment. The Angles Of Inclination Of The Platform And Back Are Adjusted Individually For The Features Of The Users Figure. As In All Professional Power Simulators, The Back Is Made Of Strong Plywood 20 Mm Thick At The Base, Polyurethane Filler Foam 40 Mm Thick And Vinyl Science. All Materials Used Are Resistant To Wear And Deformations. All Structural Elements Of The Press Machine For The Bench Press Are Covered With Strong Powder Coating. This Simulator Is Equipped With Rubber Bloodsters, Which Gives It Stability And Safety During Training. Frame Profile: 80*60*2 Mm. Maximum Load: 350 Kg. Congland With Customer 87089154006, Barks Under A Slope Of 90 Degrees (Power), Length - 117 Cm. Width - 100 Cm. Height - 159 Cm. Rama: Cold -Rolled Profile Steel 5X10 Cm At An Angle Of 90 Degrees, Also Known As Benching Benches, Is A Common Simulator For Training The Chest Muscles, Shoulder Muscles And Three -Headed Shoulder Muscles. Congland With Customer 87089154006, The Handle For Traction Is Straight 52 Cm - 1 Pc. The Handle For Traction Is A Straight 52 Cm Designed To Perform Traction Exercises On Cable Simulators - A Wide Range Of Exercises. It Has Non -Slip Rubber Linings For A Reliable And Convenient Grip. Congland With Customer 87089154006, Iron Handle For Traction (Rubberized) - 1 Pc. Made Of Chrome Steel, The Handle Guarantees A Long Service Life Without Loss Of Quality. The Rubber Corrugated Covering Of The Grip Provides Reliable Clutch And Comfort During Training, As Well As The Non -Slip Surface Avoids Injuries. The Pen Is Suitable For Any Block Simulator. Congland With Customer 87089154006, Olympic Rod For The Bar 2200Mm - 2 Pcs. Olympic Vulture Straight 20 Kg Of Mvn: 300 Kg Reinforced Vulture With A Maximum Load Of 300 Kg. Chrome Steel, Nonsense Notes For A Durable Grip. The Diameter Of The Central Part Of The Neck Is 28 Mm. Characteristics: • Purpose Professional • Net Weight 20 Kg • Length 220 Cm • Material Chrome Steel. Congland With Customer 87089154006, Смягчающая Накладка Для Штанги – 1 Шт. The Thick Foamed Anti -Slip Material Of High Density And Convenient Velcro Straps For Fixing Guarantee That The Softening Overlay Will Remain In Place During The Rise, Preventing Displacement And Rolling Even With The Most Intense Movements. Additional Characteristics Of The Lining Length - 44 Cm Inner Diameter - 3.3 Cm External Diameter - 10 Cm Coordinate With The Customer 87089154006, The Bar For The Bench Press Lying With An Inclined Bench, An Inclined Bench For The Bench Press With An Angle Of Inclination Of 40 ° - Is Designed To Perform Various Exercises Aimed At The Development Of The Chest Muscles, Shoulders And Triceps. It Is Ideal For The Bench Press On The Inclined Bench, Which Is One Of The Main Exercises To Increase The Mass And Strength Of The Chest Muscles. The Bench Was Developed Taking Into Account Convenience And Safety During Training. The Main Structure Is Made Of A 60X30 Mm Profile With A Wall Thickness Of 2 Mm, And The Powder Painting Of The Frame Provides Durability And Protection Against Damage. The Back And Seat Are Made Of Plywood 18 Mm Thick On A Steel Base. The Filler Is Made Of Foamed Polyurethane Foam, And Upholstery Is Made Of Artificial Leather. All Handles Have Pvc-Handrails For A Comfortable Grip. The End Parts Are Protected By Pvc Plugs, And Plastic Anti -Slip Bloodsters Provide Stability On The Surface. Agree With The Customer 8 708 915 4006., Olympic Disk On The Bar (Pancakes): 1.25Kg - 4 Pcs; 2.5Kg - 4 Pcs; 5Kg - 4 Pcs; 10 Kg - 4 Pcs; 15Kg - 4 Pcs; 20 Kg - 4 Pcs; 25 Kg - 4 Pcs Model: Metal Rubberized. The Base Of The Disk Is Made Of Whole Metal. The Disk Is Covered With High -Strength Rubber Using A Heat Mile For Durable Grip With Metal. The Sleeve Is Made Of Stainless Steel, Covered. The Disk Is Equipped With Three Anatomical Grip. Congland With Customer 87089154006, The Bar Is Curved For Traction With A Parallel Grip Of 63 Cm - 1 Pc. The Handle For Traction Is A Parallel Grip Of 63 Cm Hilt A Straight Line Rotating With D-Shaped Rubberized Handles Is Intended For The Back Muscles. Length - 63 Cm. Color - Chrome/ Black. Composition - Chrome Steel, Rubber. The Maximum Load, Kg - 150. Width, Mm - 16.5. Product Height, Mm - 15.5. Congland With Customer 87089154006, Silent For Ikr Sitting (Lower Lobe)-1 Pc. The Seat And Stops For The Legs Of The Machine Is Seated By A Strong Plywood 20 Mm Thick At The Base, Polyurethane Filler Foam 40 Mm Thick And Vinilisk. Foot Stops Have Height Adjustment, Which Allows People With Different Growth. Drill For Weighting With A Diameter Of 50 Mm. It Is Made Of A Thick -Walled Pipe, Polished And Covered With Strong Powder Paint. The Simulator For The Lower Leg Muscles Is Equipped With Rubber Bloodsters, Which Gives Stability And Safety During Training. All Nodes Of The Calf Machine Are Equipped With Closed -Type Ball Bearings. All Ends Are Equipped With Pvc Plugs. Congland With Customer 87089154006, The Platform For The Empty Traction With The Olympic Vulture Is 1 Pc. The Weightlifting Platform Is 2500X2500x100mm. The Main Material For The Manufacture Of The Platform Is A Wooden Array, 50 Mm Thick. The Platform Is A National Platform Consisting Of Wooden Sections. The Sections Are Made Of High -Quality Wood Using Glued Timber Technology. The Assembly Of The Sections Is Performed According To The Numbering, The Screed Is Performed Using Steel Stilettos And Nuts. The Ends Of The Studs And Nuts Are Recessed In Special Nests. On The Front Surface, Two Composite Amortization Paths Are Cut. The Rubber Surface Is Used To Depreciate The Blows From The Fall Of The Bar. Along The Perimeter, The Platform Is Edged With A Steel Corner Painted With Powder Coloring. Congland With Customer 87089154006, Step Platform With Plioboks-2 Pcs. The Step -Platform Is A Simulator Made In The Form Of A Compact Bench With An Adjustable Height (Three Levels Are Available - 10, 15 Cm From The Floor). First Of All, It Is Intended For Step Aerobics, But Also Suitable For Other Types Of Cardio And Strength Loads. The Shell Is Made Of Durable Plastic, So It Withstands A Large Weight - Up To 150 Kg. The Working Surface Of The Steppes For Fitness Is Very Spacious: Its Dimensions Reach 109 X 40 Cm. It Also Has A Special Rubber Coating With Anti -Slip Properties, Which Makes Classes On It Comfortable And Safe. Each Step Of The Level Of The 3Rd Level Is Equipped With Four Rubberized Legs, Which Play The Role Of Shock Absorbers During Jumping. Congland With Customer 87089154006, Tripls Handle V-Shaped-1 Pc. Size: 31X20x7 Cm Diameter Of The Grip: 30 Mm Pipe: 25 Mm Material: Steel+Rubber Coating: Chrome Coordinate With The Customer 87089154006, Pancake Storage Stand - 2 Pcs. The Stand Is Designed To Accommodate Olympic And Training Disks. 9 Seats Make Possible Sorting Disks By Weight. The Diameter Of The Landing Rods Is A Choice Of 26.31.51 Mm. Landing Rods Are Made Of Polished Chrome Pipe. The Total Load On The Rack Is 600 Kg. The Supporting Structure Is Made Of A Profile Of 80X60 Mm, Wall Thickness 2 Mm. The Painting Of The Frame Is Performed By Powder Coloring. All Ends Are Equipped With Pvc Plugs. The Simulator Is Equipped With Plastic Anti -Slip Bloodsters. Congland With Customer 87089154006, Bodybar Gymnastic Stick 100 Cm - 2 Pcs. Bodibar Has A Neoprene Coating, Pleasant To The Touch, He Will Not Leave Corns On His Palms And Abrasions On His Back And Shoulders. The Special Shape Of The Plugs Will Not Allow The Shells To Ride The Floor And Get The Non -Reproach Coating. Ideal For Functional Training, Both Individual And In Groups. It Is Used As A Burden Of Lighter Than The Bar. Characteristics: Total Length, Cm: 120 External Material: Neoprene Internal Material: Metal Length (Without Tips), Cm: 110 Diameter, Cm: 3.1 Tips: Plastic Tips Length, Cm: 5.5 Tips Width, Cm: 4.4 Consonate With The Customer 87089154006
