Tenders Are Invited For Street Simulators

Grebotical Trainer 1220 Mmshirin 864 Mmmosphere 824 Mmvuly Simulator Should Be Made With The Following Technical Characteristics: Metal Base (Frame), Lever System. The Simulator Frame Is Made Of A Pipe With A Diameter Of 60 Mm. The Levers Are Made Of Pipe With A Diameter Of 42.3, Handles From A Pipe With A Diameter Of 26.8. The Mortar Is Made Of Sheet Of At Least 8 Mm. Pvc Handles For Holding Hands; Pvc Footrests For Feet. The Seat Is Made Of 3 Mm Sheet And Laminated Plywood Or Plastic With A Thickness Of At Least 12 Mm. The Simulator Is Attached To The Mortgage, Which Must Be Pre -Concreted (Included In The Simulator). Complete With The Simulator Is A Rubber Cover Of 30 Mm Thick In The Amount Of 4M2.The Metallic Elements Should Be Painted With Powder Paint. The Cums Used Should Be Stainless Or Galvanized And Have Protective Plastic Glasses And Caps. The Simulator Frame Is Made Of Pipe Ø89*3, The Handrail Is Made Of Du25 Pipe. The Lever Is Made Of Du50 Pipe. The Canvas Of The Footrest Is Made Of Sheet 4 Mmfalf. The Cloth Plate Is Made Of At Least 8 Mm. Complete With The Simulator Is A Rubber Cover Of 30 Mm Thick In The Amount Of 4M2.The Metallic Elements Should Be Painted With Powder Paint. The Cums Used Should Be Stainless Or Galvanized And Have Protective Plastic Glasses And Caps. The Simulator Effectively Develops And Strengthens The Pellet Zone. The Simulator Has To Allow The Exercises By Lifting The Weight. The Constant Racks Of The Simulator Must Be Made Of A Metal Pipe With A Diameter Of At Least 102 Mm. And Wall Thickness 3 Mm. On A Metal Base With Holes For Attachment To A Mortar Thickness Of 8 Mm, The Top Of The Rack Is Brewed With A Metal Circular Plug. Other Elements Of The Structure Are Made Of A Round Metal Pipe With A Diameter Of 42.3 Mm, Sheet Metal 6 Mm Thick And 4 Mm Thick, The Handles Made Of Pipe With A Diameter Of 26.8 Mm. The Back And Seat Of The Simulator Are Made Of Moisture Resistant Plywood Or Plastic With A Thickness Of Not Less Than 12 Mm. The Triator Is Attached To The Mortar, Which Should Be Pre -Harvested (Part Of The Simulator). Complete With The Simulator Is A Rubber Cover Of 30 Mm Thick In The Amount Of 4M2.The Metallic Elements Should Be Painted With Powder Paint. The Cums Used Should Be Stainless Or Galvanized And Have Protective Plastic Glasses And Caps. The Simulator Allows You To Perform