Anchor Wedge Clamp Dn 123, The Number Of Cores - 2/4 Type Of Cable - Sip -4 Section Of The Veins (Min. - Max.) - 2X16 - 4X25 Mm2 The Minimum Destructive Load - 3.5 Kn Nominal Voltage - 1000 In Brand - Dn Mass - 104 G Of Product Material - Aluminum/Glass -Reinforced Polyamide. The Supplier Must Provide A Quality Certificate, Supportive Clamping Type So130.02 With Lamb. The Supplier Must Provide A Quality Certificate, Hook So76.2 Universal. Supplier Provides A Quality Certificate, Remote Bandage So79.1. The Supplier Must Provide A Quality Certificate., The Clamp Is A Branch, Type P645 With Piercing The Insulation. Supplier Provides A Quality Certificate, Anchor Clamp Rpa 450/120, Destroyed 40 Kn, Section 4/50/4*120 Mm2 For Fastening Sip. The Supplier Must Provide A Quality Certificate, The Clamp Is A Branching, Piercing, Type P70 With Piercing The Insulation. Supplier Provides A Quality Certificate, Sliw 54 Piercing Clamp Is Sealed. The Supplier Must Provide A Quality Certificate, Piercing The Clip Slip 22.127. The Supplier Must Provide A Quality Certificate, Scrapery For The Honeycomb Mounting Tape, With Teeth, Lock. Designed To Fix The Mounting Unit Performed By A Fixed Steel Ribbon During The Installation Of The Reinforcement Of The Sip On Reinforced Concrete, Wooden Or Metal Supports Of The Air Transmission Lines. A Potential Supplier Must Provide A Quality Certificate., The Bandage Tape Is Honeycomb37: Material-Staining Material. Coating-Frozen Steel. Resistance To Aggressive Environments. The Maximum Permissible Load-8 (Kn). Length-50 M. Width-20 (Mm). A Potential Supplier Must Provide A Quality Certificate.
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
