Bids Are Invited For Price Registration For Eventual And Installment Acquisition Of Securities To Meet The Demands Of The Municipal Secretariat Of Education And Culture Of Jataizinho.

Chair Bass Bass Fixed Base 04 Feet Chair Bass Bass Fixed Base 04 Feet Seat: Multilaminated Wood Structure, With A Minimum Thickness Of 12 Mm, With High Hardness And Maximum Thickness Of 2 Mm, Injected Foam, Cfc Exempt, At Least 50 Kg/M³, Minimum Thickness Of 50 Mm, 470 Mm Wide And Depth Of The 470 Mm Seat Surface At Least. Polypropylene Protection Cover With Rounded Edges Without Use Of The Pvc Profile. Backrest: Low, With A Width Of 440 Mm And Vertical Extension Of The 395 Mm Backrest. Injected/Molded Backrest Structure Anatomically, 10 Mm Natural Polypropylene. Injected Foam Upholstery, High Resilience, Low Flamability, Minimum Thickness Of 40 Mm. Protective Cover, Without Use Of The Profile Lining In 100% Polyester Fabric Or Eco Leather. Structure And Mechanisms: Blade For Backrest With Binding Steel Plate 6, 00Mm, Folded, With An Internal Angle Of 95 °. It Has On Its Upper Part Fixing Plate With Holes To Fix In The Backrest And Seat Structure. Fixing The Blade To The Seat And Backrest Occurs Through ¼ Clawed Nuts, By Philips Screws Pan Type And Pressure Washers. Fixed Base 4 Feet, Consisting Of Two Inverted U Structures, Interconnected By Two #14 Steel Tubes, With Circular Section Diameter 1. The Flange Is Stamped In 3Mm Steel, Measuring 195X230mm. At The Bottom Of The Structure Contains Four Internal Tips For Circular Tube. Fixing The Seat In The Chair Structure Will Be Through ¼ Clawed Nuts, Stuck In The Inner Structure Of The Seat, Produced In Steel Printed With Laminated Thread, By Philips Pan Bolts And Pressure Washers. Fixing The Seat To The Chair Structure Will Be Through ¼ Clutter Nuts In The Inner Seat Structure, Produced In A ¼ Thread Stamped Steel, By Screws Philips Pan Type And Washers, Chair Medium Swivel Swivel Chair Medium Rolling Base: Medium Back, With Width Of 435 Mm And Vertical Extension Of The 490Mm Backrest. Injected/Molded Backrest Structure Anatomically, In A Minimum Thickness Of 10 Mm Thickness; Injected, Flexible Polyurethane, High -Pressure Injected Foam Upholstery (Chlorine Carbide), At Least 50 Kg/M³ Minimum 40 Mm Thickness And Injected/Molded Textured Polypropylene Finish, Without Use Of Pvc Profile, 100% Polyester Fabric Coating Or Eco Leather. Seat: Structure Of Anatomically Molded Multilaminated Wood Seat With Pressure Of 10 Kgf/Cm², With A Minimum Of 12 Mm; Injected Foam Upholstery, Minimum Thickness Of 50Mm. 470 Mm Width And Depth Of The 470 Mm Seat Surface At Least; Injected/Molded Protective Cover And Textured Polypropylene -Molded With Rounded Edges, 100% Polyester Fabric Coating Or Eco Leather. Finishing: The Seat Fixation The Structure Of The Chair Will Be Through ¼ Clutter Nuts In The Internal Structure Of The Seat, By Screws Philips Pan Type And Pressure Washers. Mechanism: Support For Oval Section Steel Height Adjustment Measuring 18X43mm And Wall Thickness Of 1, 5 Mm Wall Thickness, Has Fixing Plate Made Of Steel Plate With Holes To Fix In The Backrest Structure. Allows The Vertical Adjustment Of The