The Meter-Regulator Is Universal For Temperature, Pressure/ Pid-Regulator Of Temperature, Pressure, Level, Humidity, Concentration Of Substance, Flow Or Other Physical Quantities In Various Technological Processes. 2X Channel Microprocessor. Shield Design Of The Pc1 (96*96*53/70). Ip54, With 2 Universal Entrances And 2 Outputs. Universal Power Allows The Device To Operate Both From The 230V Variable Current Network, And From A Low -Current Network With A Rating Of 24V Dc .. Two Contrasting Indicators Of Red Or Green. Built-In Rs-485 Interface (Modbus Ascii/Rtu Protocol). In The Register Of Rk. From The Verification Of This Year Gost R 51522 (K-3), Kvvge Brand Cable, Voltage Of Not More Than 1,000 V/ 10*1.5, Control Copper, Multi-Core, Insulation Of The Residential-Polyvinyl Chloride Plastric, Shell-Polyvinyl Chloride Plastric, Tin-Resistant Execution (Operation Temperature Up To -60 ° C. Cabel Should Have A Distinctive Marking Of Insulated Cores. Marking Of The Veins Should Be Digital Or Color, Providing The Possibility Of Determining Each Vistrows Of The Mountage., The Iea Electric Executive Mechanism/ Are Used In Automatic Control Systems For The Technological Process For Moving The Regulation Organs (Transmission Of Torque) At The Signal Of Devices Automatic Or Controlled By Personnel. The Nominal Full Passage Time: 63S. Position Signaling Unit: Inductive (Bspi) Three-Phase Power Supply Voltage Block Of The End Switches (Bkv) Gost 24979-81 (K-3), Kvvge Brand Cable, Voltage Not More Than 1,000 Iv/ 4*0.75, Control Copper, Multi-Dwelling, Insulation Of The Residential-Polyvinyl Chloride Plastric, Shell-Polyvinyl Chloride Plastric, Tin-Resistant Execution (Operating Temperature Up To -60 ° C, Technical Manometer/ Measurement Range (0-1.6Mpa), A Technical Pressure Gauge With A Diameter Of The Housing 160Mm With A Radial Fitting Of Brass, With A Thread Of Accession M20x1.5 And An Accuracy Class 1.5. In The Register Of Rk. With The Verification Of This Year. Gost 2405-88 (K-3), Technical Manometer/ Measurement Range (0-2.5Mpa), A Technical Pressure Gauge With A Body Diameter Of 160Mm With A Radial Fitting Of Brass, With A Thread Of Accession M20x1.5 And An Accuracy Class 1.5. Gost 2405-88 (K-3), The Tape Is A Special Diagram, For The Expense Of Flow Rate, Temperature, Pressure / Roll, Registry Number 1757, Type Of Lpg- 160Mm. Gost 7826-93 (K-3), The Measuring Pressure Transducer/ Pressure Difference Sensor, “Intellectual”, With A 4-20M Output Signal. A Multi-Band-Transmitted With A Digital Data Transfer Protocol For Hart Data. Lcd-Display With A Keyboard Backlight. The Established Measurement Range 0 ... 63Kp (8 Units)., 0 ... 100Kp (10 Di). Standard Performance. Electric Connection, Oilcopic Input, Connection To The M20*1.5 Process. The Permissible Of The Mainly Given Error +/- 0.5 ... 1 %. In The Collection With The Valve Block, The Material Is Stainless Steel., The Pressure Of The Working Environment Is 40Mpa, In The Register Of Rk. From The Verification Of This Year Gost 22550-85, 67954-17 (K-3), Technical Manometer/ Measurement Range (0-0.1Mpa), A Technical Pressure Gauge With A Diameter Of The Case With A 160Mm With A Radial Fitting Of Brass, With A Thread Of Accession M20x1.5 And An Accuracy Class 1.5. Gost 2405-88 (K-3), The Meter-Regulator Is Universal For Temperature, Pressure/ 2X Channel Microprocessor. Shield Design Of The Pc1 (96*96*53/70). Ip54, With 2 Universal Entrances And 2 Outputs: Electromagnetic Relay, 8A At 220V, 50Hz. 4 Discharge Digital Indicator. With The Rs-485 Interface Module. Designed For Measuring And Regulating Temperature, Pressure And Other Physical Quantities. Gost R 51522 (K-3)
