New, Tilting Bucket, Capacity Of At Least 12M³ And Maximum 14M³, 5,000Mm Length, Width Of 2,500Mm, Fixed Side Covers Of At Least 1,000Mm And Maximum 1,100Mm In Plate 4, 75Mm With 10 Cm High, Lower Sides Of Rounded Buckets, Sides With 10 Calandry Reinforcement Ranging From The Top Of The Cover, Walking All Over The Side And Going To The Chassis And Both Welded At The Same Level As The Chassis, Not Overlapping Soldiers On The Chassis, And A French Hand Each Profile U, Totaling 9 French Hand Profile On The Side Of The Floor In At Least 4, 75Mm, Tilting Back Cover And Side Opening, 6, 35Mm Calendar Folds For Reinforcement Purposes, An Attached Toolbox, Homologated Biker, Front Cylinder 4 Stages With 4300 Opening With 7 Inch Shirt, 52Mm Lower Pin, The Two Double Bucket Chassis All The Length Of 8Mm Thick Pipe With 230Mm Height And 70Mm Width, The Bucket Turns Pins 50Mm 1045 Steel With Graxeira, Internal Plass Of The 6, 35Mm Steel Sheet With Chassis Height And With Maximum Space Of 37Cm Between One And The Other, Plate 6, 35Mm, Reflective Lanes, Homologated Bumper, Hydraulic System And Activation In Accordance With The New Legislation Of The Signs Installed On The Sides, Necessary Suitability System, From The Chassis Of The Bucket Installation, White Pu Paint Paint, 2, 65Mm Slate To Mud With Rubber Clay, 20Cm Foment Holder With Stairs At The Bottom. It Is The Responsibility Of The Winning Company To Install The Bucket With The Truck, At No Cost To The Municipality Of Novo Barreiro/Rs. The Delivered Equipment Must Be Warranty And Technical Assistance Of At Least 12 Months From The Delivery.
