Baby, Crepe, Type I, Made With Cotton Wires And Mixed Fibers, 10Cm Width Dimensions X 1, 80M In Length, 21, 8 Grams, Wire In Itself, With Terrais, Non -Sountain, Uniform, Uniform, Impurities, Unconless, Amendments, No Stains And Any Other Type Of Defect. Packed Individually, It Must Contain In A Legibly Fixed In Your Body Name And Product Brand, Composition, Manufacturer Identification, Shelf Life, Lot Number. Primary And Secondary Packaging Packed According To Current Standards. Present Registration Anvisa., Probe, From Folley, N. 12, 02 Copies, 30 Ml Balloon, Sterile. Individual Ebag, In Surgical Degree And Thermoplastic Film, Opening In Petala. In The Packaging Should Be Printed Identification Data, Type Of Sterilization, Procedure, Date Of Manufacture, Expiration Date And Registration In The Ministry Of Health. Inch, Luer-Look Type Made Of Transparent Or Translucent Plastic, Free Of Internal Angles Or Any Irregularity That Makes It Difficult To Insert The Mandrel.Mandril Made Of Stainless Stomach With Introductive Tip Bisize Capable Of Favoring The Perfect Alignment With The Needle Bevel, With Color-Encoded Warning According To Abnt Rules. Packaging: Individually Packed According To Packaging Standards, Which Guarantees The Integrity Of The Product Until The Moment Of Its Use, Allow The Opening And Transfer With Asptic Technique, Externally With Data Identification, Caliber, Validity Of Two -Year Sterilization Time From The Sterilizao Date, Manufacturer Identification Data, Wire, For Suture Nylon, Monofilation, Black N. 6-0, 45 Cm Long Wire (May Vary At + Or - 5 Cm), 2, 0 Cm And 3/8 Circle, Cutting, Cuticular (Can Vary At + Or - 2 Mm). Primary Packaging Packaged Individually According To Packaging Standards That Guarantee The Integrity Of The Product Until The Moment Of Its Use, Allowing Opening And Transfer With Asptic, Sterile And Apirogenic Technique. The Primary Packaging Should Contain Product Identification And Characteristics Information, Such As: Manufacturer Name, Lot, Date Of Manufacture And Expiration Date. Secondary Packaging Should Be According To The Manufacturers Usual, In Order To Ensure The Integrity Of The Product During Storage Until The Time Of Use. The Product Must Obey Any Legislation That Is Inherent In It. Primary And Secondary Packaging Labeled According To Rdc 185/01/Anvisa., 09/05/2025
