Description: Simple Removal Transport Ambulance - Type B. Van For 3 Occupants (Long/High Ceiling), White, Zero Km; Year/Model: 2024/2024. Minimum Total Length: 5,900 Mm; - Minimum Distance Between Axes: 3,500 Mm; - Maximum External Height: 2,700 Mm; - Minimum Service Hall Length: 2,800 Mm; - Minimum Height Of The Service Room: 1,800 Mm. Doors: 02 Doors (Driver And Passenger), Side Port In The Patient Compartment And Two Rear Doors With Minimum Horizontal Opening In Two Positions (90 And 180 Degrees Or 90 And 270 Degrees), With A Minimum Height 1,800 Mm, With Automatic Device To Keep Them Open, Preventing Its Spontaneous Closure In Case The Vehicle Parked In Unevenness; Engine:- Front, Minimum 4 Cylinders; - Maximum Power Equal To Or Greater Than 160 Hp; - Maximum Torque Equal To Or Greater Than 35 Kgfm; - Power System: Electronic Injection. -Suction: Turbocharger. Rear Axle Traction. Fuel: Diesel Oil; - Minimum Fuel Tank Capacity: 65 Liters. Transmission: - Manual Of At Least 5 Speeds Ahead And One To The Reverse. Direction: Electric, Hydraulic Or Electro-Hydraulic. - Minimum Payload Capacity Of 1,800 Kg; - Minimum Useful Volume Of The 10 M3 Load Compartment. - Pbt - Total Gross Weight Approved At Least: 4,000 Kg. Suspension: Components Shall Have A Sizing That Exceeds The Load Imposed On Each Limb. Only Corrections Approved By The Chassis Or Monoblock Manufacturer Will Only Be Allowed To Compensate For Improper Deflections Beyond The Allowed Tolerances. Corrections Will Not Be Allowed Due To Unbalance, The Vehicle Must Be Delivered Balanced; - The Set Of Front And Rear Suspensions Should Have Satisfactory Efficacy/Efficiency Regarding The Reduction Of Vibrations/Trepidations Originating From The Irregularity Of The Circulation And/Or Bodywork, Properly Reducing The Injuries That Would Come To Affect The Transported Patient. - Brake With Anti-Block System (Abs) In Quatr
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
