The Electronic Meter Is A Single -Phase Multi -Tariff With A Plc Function. Tx P Plc Ip P Rs 220V 10 (60) A Cu Cu Active Ac Energy With A Telemetric Output Is Designed To Take Into Account Electrical Active Energy In Single -Phase Alternating Current Circuits One Or Several Tariffs With A Built -In Plummer Transfer Of Data On A 0.4 Kv Power Network. Plc Functions Are Used To Read Data From Meters In Remote Mode. The Counter Is Equipped With A Load Control Relay, Which Allows You To Control The Load With Specified Restrictions, And, If Necessary, Turn Off The Load From The Network. For A Rural Club Birlestik, Designed For The Infrequent (No More Than 6 Per Hour) Non-Automatic Switching Of Electrical Currents Of Ac 50 Hz, With A Voltage Of 400 V. Input-Distribution Devices Of Public And Industrial Buildings Cabinets And Points Distribution Transformer Substations Advantages: Simplicity And Reliability Of The Design Wide Selection Of Type Of Performance On A Rated Current. The Approval Of Installation. The Structure Is The On And Disconnected Position Of The Apparatus Is Indicated By The Position Of The Knife -Type Contact System With A Visible Rupture Of The Chain In The Rp Series, Fuses Of Fuses Of The Ppnn, Pp, The Ability To Change The Distance Between The Lips Of The Bases For Various Types Swimpers All Threaded Joints Of The Chillers Are Protected From The Unscruption Itself: The Live Parts Are Made Of Tinned Electrical Copper. Isolating Elements Are Made Of Ceramics. The Supporting Panel And Elements Of The Controls Are Made Of Galvanized Steel
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
