Tenders Are Invited For Delivery Of An X -Ray Apparatus To The Detention Center In Hajnówka

The X -Ray Apparatus Must Be Compatible With The Descriptive Station And Enabling The Start Of Work Without Any Additional Costs And Formalities On The Contracting Authority. The Estimated Number Of X-Ray Photos Taken In The Month Is 50. All The Offered Elements Must Be Compatible And Allow You To Start Work Without Any Additional Costs On The Contracting Authority. Med-Xn51lp • Eizo Radiforce Rx250 21.3 Monitor 2Mp • Dell E2223hn Monitor • Tomocon Workstationminimal Software Configuration Of The Digital X-Ray Apparatus: 1. Column With An X-Ray Lamp Integrated With A Table Only In The Vertical Axis In Combination With The Mobile Table - The Movement Of The Column Horizontal And Vertical Or Only Horizontal In Combination With The Mobile Table And The Movement Of The X -Ray Lamp Along The Column Exhausting All The Necessary Movements - Telescopic Movement Of The Column With An X -Ray Lamp Or A Mobile Table, Which Replaces The Telescopic Movement Of The Column2. And Transverse To The Load Of A Minimum Of 200 Kg + Aec3 System. X-Ray Lamp:- Thermal Capacity Of The Anode: 300 Khu- Bonfire Sizes 0.6/1.2Mm- Dose Dose Measure Dap4. Generator:- Power 50Kw-100Khz- High Voltage Range 40-150Kv5. Lung Photos Tripod:- A Wide Range Of Bucky-Aeclub Panel Adjustment. One Universal Position Rotated For Projection On A Tripod6. Wireless Digital Detector (43Cmx43cm) Pcs. 2 Or Pcs 1 Built Permanently In A Universal Rotated Position7. Server For Storing Data Of The X-Ray Laboratory. Mushrooms, • Execution Of Radiation Warning Lamps,- Execution Of The Design Of Permanent Covers And Implementing It, If Required,- Preparing The Application For Sanitary For The Collection Of X-Ray And Obtaining A Positive Opinion,- Preparing Rooms Under The Rtg Laboratories And Rtg Manufacturers Requirements In Terms Of Construction And Installation,- Lighting Measurements, Ventilation, Other Required Testing It Is Necessary To Adapt Them To The Required- Perform Additional Works Required For Assembly And Proper Operation Of The X-Ray. The Positioning Of The Purchased X-Ray Is Planned In The Room Located On The Ground Floor Of The Centrum Centified Coad Pavilion In The Strict Unit- Room Description:- Rtg Office (15.29M2) Has Separate Rooms, I.E. X-Ray Control (7.18M2) And Rtg Mucus (6.55M2)- Window And Door (Description Drawing), - Walls: Outer Reinforced Concrete 20Cm, Partition Wall 12 Cm Silicate + 12 Cm Concrete Block, - Pvc Floor Covering On The Floor: - Homogeneous Vinyl - Distracting Electrostatic Charges - Electrostatic Properties: En 1815 <2Kv, - Electrical Resistance: En 1081 R1, - Class Of Anti -Slip Usable: 34/43,- Surface Protection: Pu- Place For A Camera Without Underfloor Heating (Place Designated In The Drawing), Remaining Floor Surface With Underfloor Heating (Cross-Section With Layers In The Attachment)- Cable Riverbed Approx. 25M With Electric Switchgear To Arrange The Cable And Tube In The Floor In The Control Room/Office (Designation In The Figure), For Connecting The