Gost 7921-86. Sleeve No. 11. Metal Sleeves For Dental Crowns No. 11. Standard Blanks For The Manufacture Of Stamped Tooth Crowns. They Were Made By Cold Stamping From The Tape By Steel Stainless Steel 0.30 Mm Thick. The Diameter Of The Sleeve Is 8 Mm, The Height Is 12 Mm. Packaging 100 Pcs., Gost 7921-86. Sleeve No. 10. Metal Sleeves For Dental Crowns No. 10. Standard Blanks For The Manufacture Of Stamped Tooth Crowns. They Were Made By Cold Stamping From The Tape By Steel Stainless Steel 0.30 Mm Thick. The Diameter Of The Sleeve Is 8 Mm, The Height Is 12 Mm. Packaging 100 Pcs., The Refresher Liquid -Flowered Compositional Plastics, Shade: A2, In Syringes (2 Syringes) On 2 G. Eesflow A2 (2G X 2Shpr) Light -Core Compositional Plastmass Esflow, Shade: A2, In Syringes (2 Syringes) In 2 G. Highly Molecular Monomer, Which Gives A Low Molecular Monomer, Which Gives A Low -Low Monomer, Which Gives A Low Polymerization Shrinkage - Less Than 2.4%, Compression Stability - 290 Mpa, Diametral Stability - 58 Mpa, Fluidity, On A Scale From 1 To 5 - 3 (Average), Radiocontranstens, Compatible With Materials From Other Manufacturers, Is Produced In Vita Coloring Vita, Gost 31577-2012 Caries Indicator. Application: Is Used In Order To Determine The Demineralized And Affected Layer Of Dentin. The Composition Stains The Outer Layers Of Carious Dentin Into A Rich Red Tint. Healthy Enamel And Normal Mineralized Tooth Tissue Do Not Change Their Color. Combining With A Denatured Collagen, Which Is Contained In Carious Dentin, The Composition Stains The Tooth Tissue In 10 Seconds. This Allows You To Remove Only The Zone That Changed Its Color Without Affecting The Unfortunate Area, Gost 7983-2016 Paste For Obstructing Root Canals. Email, X -Ray Contrast Paste For Constant Obstructing Infected Root Canals In Particular In The Presence Of Granulomas, Gost 31577-2012 Plastic For Non-Removable Prosthetics Color 12. Plastic For Non-Removable Prosthetics Are Acrylic Plastic Of Hot Curing Such As Powder-Liquid. Suspensional Powder Grafted Fluorine Copolymer; Liquid - A Mixture Of Acrylic Monomers And Oligomers, Baside Material Self -Hardening Hot Confirmation Intended For Repair And Relocation Of Removable Dentures, As Well As For The Manufacture And Repair Of Orthodontic And Orthopedic Devices And Structures. Basic Materials Are Available In The Form Of Two Components - Powder Containing Metacrylic Acid Polyester, A Catalyst For Polymerization Reaction Of Benzoil, And A Liquid Containing A Monomer Methylmethacrilate (M) And/Or Monomer Ethylmetcrylate (E), After Mixing The Powder With A Liquid, A Polymer Is Formed When Heating (Hot Cereal) - Without Or Without Or Without Or Without Or Without Or Without Heating (Self -Hardening) - Ho. Basic Materials Are Distinguished By High Technology, Simplicity And Speed Of Manufacturing Products That Have High Quality, Functional Durability, Natural Appearance And Biocompatibility., Gost 31577-2012 Plastic For Prosthesis Bases. The Plastic For The Bases Of Prostheses With The Veins And Without Is A Plastic Of Hot Curing Such As Powder - A Liquid Based On Fluorine Acrylic Copolymers. In Addition To The Vein Powder, Painted Synthetic Fibers Are Additionally Added To Simulate The Color Of Natural Tissues. The Prosthesis Of With Livestocks And Without Increased Strength And Elasticity, With Its Color And Translucent, Is In Harmony With The Soft Tissues Of The Oral Cavity., Gost 7921-86. Sleeve No. 8. Metal Sleeves For Dental Crowns No. 08. Standard Blanks For The Manufacture Of Stamped Dental Crowns. They Were Made By Cold Stamping From The Tape By Steel Stainless Steel 0.30 Mm Thick. The Diameter Of The Sleeve Is 8 Mm, The Height Is 12 Mm. Packaging 100 Pcs., Gost 28519-90 Crown Saw For The Cut. Coronic 2Pcs Solve-Paid For A Direct Tip For Cutting Dental Crowns, Gost Iso 22112-2011 Artificial Plastic Teeth. A Set Of Frontal And Chewing Acrolol Teeth A2 14 Fas 30, Material Dental Spy Silicone. C-Silicon Of High Viscosity For Removing The First (Basic) Print. Suitable For Both Two -Stage Equipment (Double Print), And For One -Stage (Simultaneous Print). Hydraulic, Tixotropic. Well Distributed Along The Wet Surface Accurately Displaying The Relief, Dental Gel Based On Phosphoric Acid For Etching Dentin And Enamel 5 Ml, Gost 7921-86. Sleeve No. 9. Metal Sleeves For Dental Crowns No. 09. Standard Blanks For The Manufacture Of Stamped Dental Crowns. They Were Made By Cold Stamping From The Tape By Steel Stainless Steel 0.30 Mm Thick. The Diameter Of The Sleeve Is 8 Mm, The Height Is 12 Mm. Packaging 100 Pcs., Gost 31566-2012 (Iso 12163: 1999) Modeling Wax. The Dentition Of The Dentisting Blue Of The Average Fluidity In The 55G Package Translucent Wax Plate Without Internal Stresses In A Softened State Easily Connected To Each Other Without Sticking To The Fingers. The First Is Easily Formed In A Preheated State And Is Processed At Room Temperature With An Acute Tool. After Weak Heating Above The Flame, Wax Plates Have A Smooth Surface. In The Manufacture Of A Prosthesis, The Wax Easily Without A Residue Is Removed With Boiling Water From Gypsum Shapes, Leaves No Traces On Porcelain And Plastic Teeth And Does Not Stain The Prosthesis Plastic. Wax Has A Slight Thermal Linear Expansion. The Basic Wax Does Not Cause Irritation Of The Tissues Of The Oral Cavity., Gost 31566-2012 (Iso 12163: 1999) Baside Wax. Dental Wax Soft In Packaging 500G, Gost 31577-2012 Orthopedic Diamond Bores Are Different. For Tips For Drilling, Mushroom -Shaped On A Long Leg Of Different Sizes., Gost Iso 22112-2011 Artificial Plastic Teeth. A Set Of Frontal And Chewing Acrolol Teeth A2 22 Fas 28, Gost 31577-2012 Pitching Alginate. Alginate Blind Mass For Prints, Gost 31577-2012 Turbant Top With Highlighting With Ceramic Bearings, Without An Adapter, Gost 31577-2012 Covering Varnish 32 G For Masking Metal Frames Of Structures With Plastic Facing. Used As A Feast For Basic Plastic, For Example, In The Saddle Part Of The Frame Of Partial Removable Prostheses, Fainting Light -Hardening Material. The Material Is Dental Restoration, Nano Hybrid, Light Curing Nanoicitride Composational Material Is Suitable For All Cavities Of Frontal And Side Teeth., Silver Solder Wire For Orthopedic Dentistry. The Solder Is Designed To Solder The Parts Of Dentures Made Of Stainless Steel And Cobaltochrom, Gost 31577-2012 Matrices Lavsannaya Separation, Width 8 Mm, Gost 31577-2012 Crown Discs For The Turn. A Disk For Apicoectomy In The Area Of Molars And Osteoplasty Of The Sinus Of Diamond, The Shank Of The Corner Long (Ral), Ø = 6.5 Mm, Ø Int. 3.5 Mm, Thickness. Disk 0.29 Mm, Coating 0.5 Mm From The Edge Of The Disk. Used With A Protective Casing, Gost 31577-2012 Crown Discs For The Turn. A Disk For Apicoectomy In The Area Of Molars And Osteoplasty Of The Sinus Of Diamond, The Tail Of The Corner (Ra), Ø = 6.5 Mm, Ø Int. 3.5 Mm, Thickness. Disk 0.29 Mm, Coating 0.5 Mm From The Edge Of The Disk. Used With A Protective Casing, Gost 31577-2012 Gips Universal Dental Bms 3 Class 25 Kg (Hard)
