Tenders Are Invited For Modernization Of Room 219 With Adaptation For People With Disabilities In The Wiśiim Building At Ul. Piątkowska 94 In Poznań - Repeated Proceedings

The Subject Of The Contract Is The Modernization Of Room 219 Together With Adaptation For People With Disabilities Of Włubynku At 94 Piątkowska Street. The Scope Of Work As Part Of The Task Includes In Particular: • Liquidation Of The Old Floor • Preparation Of The Ground And Laying A New Floor From The Tarkett Rulon Floor Covering. Teletechnical Installation1. The Contractor In The Electrical And Teletechnical Taken Will Be Obliged To Install A Cable Strip For An Accessories In Accordance With 45X45 Modules. In The Slats, 230V Electrical Sockets Will Be Mounted, Double In A Number With An Attached Attachment. 3 Pel Points Should Be Installed In The Room. The Pel Point Is A Logical And Logical Score Of 3A Computer Network Cat 6A And 4 Electrical Network Sockets. Above The Ceiling, 2 Cat 6A Single Sockets For The Wifi Network Should Be Installed. The Contractors Tasks Will Include All The Ethernet Cables To The Computer Wardrobe In Accordance With The Direction Indicated In The Drawing Of The Room Located At The End Of The Communication Route. The Twisted Pair Should Be Carried Out Above The Ceiling, Attached To It. In The Room To Which Computer Twisted Pats Should Be Brought In The Distribution Wardrobe, The New Category 6A Patchpanel Should Be Removed. After Completing The Computer Network Installation, The Contractor Must Transmit The One With Descriptions Of The Sockets Ensuring The Correctness Of The Connection And Ensuring The Transmission Speed Of The Compatible Zebrandard For Cat6a.2. In The Ceiling Part, The Contractor Must Mount 17 Pieces Of Luminaires Intended For Suspended Ceilings Of Lighting Luminaires Not Worse Than 125Lm/W. The Contractor Is Obliged To Absolute Assembly Of The Clamp Clamps Must Be In Front Of And Behind The Sockets Mounted In The Strip. All Electrical Circuits Should Be Released To A New Electrical Switchgear, Which The Contractor Must Be Made In A Place Marked In The Figure As Rg. The Dispersion Should Be Secured In Accordance With Applicable Building Law, Standards And Other Documents That Regulate Safety During The Use Of Electrical Devices. In The Switchgear, The Main Switch Should Be Installed, Overcurrent Protection, Residual Current, Overvoltage. All Nests Should Be Described, Measures To Be Made In Accordance With Construction Law. Lighting Fasteners Should Be Replaced. 3. The Projector And Electric Screen Should Be Removed From The Ceiling During The Renovation. After Assembly Of The Ceiling, The Projector Should Be Set And Set In The Axis. Hdmi Should Be Led To The Marked Place Near The Leading Place. Install The Electric Screen. 4. In Ventilation Chimneys, Old Fans Should Be Dismantled And Utilized And In Their Place Mounted Silent -Low Noise -Levels During Work In Accordance With The Permissible Level Of Sound Of Wounds Intended For People. 5. The Contracting Authority Requires A Guarantee Of Quality And Warranty For Defects In Construction, Electrical And Teletechnical Works. The Purpose Of Co -Financi