Bids Are Invited For Acquisition Of Furniture Failed Item In The Electronic Prepão No. 0000076/2024

Executive Chair Gumada Swivel Without Ride-Headed Model With Foam Injected Into Horizontal, Swivel, Medium-Range With Arms Without Arms. Base: Structure In Round Steel Pipes 1? X 2, 25Mm Resolved With Steel Brackets To Fix The Seat And Black Polypropylene Shoes For Base Support Near The Floor. The Surface Finish Of The Metal Parts Is Made With Electrostatic Epoxy-Pi Ink, With Hot Immersion, Superficial Protection With Phosphate And Greenhouse Cure At 210 ° C. Upholstery: They Have Double Sewing Buds Made In The Coating, Epostemally Applied With Glue To The Recess In The Foam. Backrest - Consisting Of Plywood, Anatomically Shaped, Slightly Adapted To The Body For Lumbar Daregion, With Rounded Edges, Coated On The Front By Injected Polyurethane Foam. The Finish Of The Back Of The Backrest Is Made Of Vinyl. Protection Of The Entire Edge Of Disease Consisting Of Pvc Profile. The Connection Of The Seat To The Backrest Made By 1/4 Steel Plate? X 85Mm Wide, Conform To A Press, Posted By Screws And Namymal Ingrown Claw. Coorvin Coated (Courvim - Preferably 1Mm Automotive Courvim). Seat - Consisting Of Plywood, Coated Upper Part By Injected Polyurethane Foam. Protection Of The Entire Edge Of The Seat Consisting Of Pvc Profile With A Format Similar To The Lateral Finish Of The Backrest. Base Fixing The Base Made By Screws And Washers With Claw -Like Pigs On The Wood. It Has A Finish Of Its Bottom Made By Polypropylene Blanket. Coat With Black (Courvim) Black. Foams: 45 Kg/M3 Density Polyurethane Foams. Black Structure. Approximate Measurements: Seat Height 49 Cm, Total Height 84 Cm, 65Cm Width, Total Depth 64Cm, Backrest 36Cm, Backrest 40Cm Width, 48Cm Seat Width, 43Cm Seat Depth, Admit, 06/05/2025