Medical Gypsum 25 Kg. Alabaster Gypsum. The Material Is Made Of Pure Alabaster, Which Is Extracted In The Mountains Of The City Of Harz (Harz), With The Addition Of 25% Of Solid Gypsum. The Castings Made From The Universal Gypsum Are Characterized By Controlled Expansion And Strength. Quick Crystallization Time: 10-12 Minutes. Scope: Casting Of Educational And Other Situational Models., Wax Basic Belovaks 500 Gr. Designed For Modeling The Basis Of Removable Prostheses, Manufacturing Of Bite Templates, Molding Of Impressive Individual Spoons, Spoon-Bases, As Well As Their Parts. It Is Produced In The Form Of Red-Pink Plates. Translucent Wax Plates Without Internal Stresses In A Softened State Are Easily Connected To Each Other, Without Sticking To The Fingers., The Occluder Is Simple. Designed To Fix Models In The Position Of Central Occlusion, Reproduction Of Imitation Of The Movements Of The Opening And Closing Of The Mouth And The Production Of Artificial Teeth., The Material Of The Impressive Zinc-Ohgenol Repin (Repin). Для Получения Оттисков С Беззубых Челюстей Индивидуальной Оттискной Ложкой При Изготовлении Полных Съемных Протезов, Для Временной Фиксации Коронок И Мостовидных Протезов. White Repin Pasta Has A Typical Mint Taste. Brown Repin Paste Has A Typical Taste Of Cloves. Time Of Hardening Per Month - 2:15 - 2:45. The Consistency Test Is 40-50 Mm. The Beginning Of Hardening Is Min. 2 Minutes From The Beginning Of Mixing. The Depth Of The Print - 0.5-1.5 Min. Complete: White Paste In A Tube 300 G, Brown Pasta In A Tube Of 125 G., Sleeves No. 100 Pcs 9 Mm. Purpose: For Dental Crowns With Dental Stages. Гильзы Изготавливаются Из Стальной Ленты 0,3Х195-М-Нт-О-12Х18н10т-З-Е, Или 0,3Х195-М-Нт-Но-12Х18н10т-З-Е По Гост 4986 И Следующих Диаметров: 7-8Мм, 9-12Мм, 12,5-17 Мм; Height 12 Mm, Radius 2.0Mm; The Maximum Wall Thickness Is 0.35 Mm, And The Minimum Is 0.26Mm; The Maximum Thickness Of The Bottom Is 0.3Mm - The Minimum 0.21Mm., The Mass Of The Print Alginate Ypeen Powder Is 1*450G. To Obtain Prints In The Manufacture Of Partial Removable Prostheses, Preliminary Prints In The Manufacture Of Complete Removable Prostheses (For The Manufacture Of Individual Printed Spoons), To Obtain Prints In Orthodontic Practice, Prints For The Manufacture Of Working Models, Temporary Crowns And Bridges. It Is A Powder, Slightly Flavored, Does Not Contain Mechanical Impurities, Green. Hardening Time At 23 ° C - (2.00-3.00) Min. Residual Deformation - Max. 3.00%. Temporary Deformation - (10.0-20.0)%. Compression Strength - Min. 0.7 Mpa., Izalgin Liquid 125 Ml. Designed For Use In Dental Practice As Isolation Material In The Manufacture Of Plastic Prostheses And Gypsum Forms. The Isalgin Dividing Varnish Is Made On The Basis Of Sodium Alginate., Sleeves No. 100 Pcs 8 Mm. Purpose: For Dental Crowns With Dental Stages. The Sleeves Are Made From The Steel Tape 0.3X195-M-O-O-12X18n10-Z-E-E-E, Or 0.3X195-M-T-And-10X18n10-Z-E In Gost 4986 And The Following Diameters: 7-8Mm, 9-12Mm, 12.5-17 Mm; Height 12 Mm, Radius 2.0Mm; The Maximum Wall Thickness Is 0.35 Mm, And The Minimum Is 0.26Mm; The Maximum Thickness Of The Bottom Is 0.3Mm - The Minimum 0.21Mm., The Spoon Is Blind. Application: In Orthopedic Dentistry, To Remove The Impress. Blind Spoons Are Specially Designed For Removing Casts In Patients With Partial Adventure. Properties: Hard, But At The Same Time Quite Plastic, An Individual Supplies Is Possible. Withstand Sterilization By Any Method. Made Of Stainless Steel. (Up.-10Pc)., Bogel Single -Enormous With A Screw Clamp. For Cooking Faces Of Bridge Prostheses And Plastic Crowns., A Set Of Frontal And Chewing Acrylic Teeth (Anise) 560Pcs In The Ue Of 4 Containers. Designed For The Manufacture Of Removable Or Non -Removable Dentures With Complete Or Partial Loss Of Teeth, Including The End And Included Defects In The Dentition. Made From The Stitched Cross-Linked Acrylic., Material Stomat. Polymer.D/Repair Of Tooth. Protheses Villacril S Included Powder 100 G. Designed For Repairing Removable And Partial Dentures, Acrylic Parts Of Begel Prostheses And Acrylic Orthodontic Devices. Ingredients: Powder: Acrylic Polymer, Benzoid Peroxide, Pigments. Liquid: Acrylate Monomers, Nn-Dimetil-R-Toluidin. Fall: V4 Pink With Veins. Mixing Proportions (G / Ml): 10 G Of Powder / 5.3 Ml Of Liquid. Mixing Temperature: -23 ± 2 ° C. Smolmerization Time In A Temperature Of 23 ° C: 12 Min. The Suitability Period For Use: 8 Min. Polymerization Process: 15 Min. 50-60 ° C, 2 Bar., Material Stom. Polymer. Hot Curing Plastic., Steel Sleeves 10 Mm. Purpose: For Dental Crowns With Dental Stages. The Sleeves Are Made From The Steel Tape 0.3X195-M-O-O-12X18n10-Z-E-E-E, Or 0.3X195-M-T-And-10X18n10-Z-E In Gost 4986 And The Following Diameters: 7-8Mm, 9-12Mm, 12.5-17 Mm; Height 12 Mm, Radius 2.0Mm; The Maximum Wall Thickness Is 0.35 Mm, And The Minimum Is 0.26Mm; The Maximum Thickness Of The Bottom Is 0.3Mm - The Minimum 0.21Mm., Steel Steels 12 Mm. Purpose: For Dental Crowns With Dental Stages. The Sleeves Are Made From The Steel Tape 0.3X195-M-O-O-12X18n10-Z-E-E-E, Or 0.3X195-M-T-And-10X18n10-Z-E In Gost 4986 And The Following Diameters: 7-8Mm, 9-12Mm, 12.5-17 Mm; Height 12 Mm, Radius 2.0Mm; The Maximum Wall Thickness Is 0.35 Mm, And The Minimum Is 0.26Mm; The Maximum Thickness Of The Bottom Is 0.3Mm - The Minimum 0.21Mm., Ufa Gel Hart Set. To Relocate Removable Prostheses., Ufa Gel Set. Mild Lining In The Mouth, Square Psr 40 Gr. The Solder Wire Is Designed To Solder The Parts Of Dentures And Orthodontic Devices. It Shall Be Replaced By An Alloy Of Silver (37%), Manganese, Zinc, Nickel, Magnesium, Cadmium And Copper. The Fluidity Temperature Is Not Lower Than 800 ° C, The Melting Temperature Is From 800 ° C To 850 ° C, The Strength Of The Shared Connection Is At Least 350 Mpa. Separate Darkens Are Allowed That Do Not Affect The Quality Of The Wire., The Films Are Conical. Filters Are Cone -Shaped, Medium Hardness, Fore -White, High -Quality Material., Material Stom. Polymer Of Hot Curing For Cladding Of Crowns And Bridges Sinma-M Color A2 In The Kit: Powder 80 Grams, One Of The Colors: A2, Liquid 40 Ml. Dental Consumables
