Bids Are Invited For Acquisition Of Office Furniture To Meet The Demand Of The Municipal Secretariat Of Administration And Its Agreements, Municipal Secretariat Of Environment, Municipal Secretariat Of Social Assistance And General Attorneys Office, Through The Price Registration System.

Office Table With Drawer (3 Drawers And Lock Only In The First Drawer) Made Of Mdp Wood. Low -Pressure Melamine Mdp -Coated Mdp Top 30 Mm Thick. Leveling Shoes At Height. Material Feet): Mdp With Low Pressure Melamine Coating (Bp) Format: Straight Table. Minimum Dimensions: 74 Cm High X 140 Cm Wide X 60 Cm Deep. Light Gray Color, Steel File - 4 Drawers - Suspended Folder - Steel Sliding File With Four Drawers Mounted On Telescopic Rails That Allow Full Opening. Dimensions And Tolerances Height: 1330 Mm +/- 10 Mm; Width: 470 Mm +/- 10Mm; Depth: 710 Mm +/- 10 Mm; Ink Layer Tolerances: Minimum 40 Micrometers /Maximum 100 Micrometers. Characteristics Body And Internal Structure In Steel Plate 22 (Thickness 0, 75Mm) In Gray Color; 24 (0, 60Mm) Plate Drawers; Telescopic Rails And Zincaded Guides On Plate 18 (1, 20Mm) Or Higher; Sheet Drawer Locking Rod 16 (1, 50Mm); Lower Closure (Next To The Floor) On Plate 24 (0, 60Mm). Zamac Handles In 96Mm Steel Finish. Cylindrical Drum Lock (Minimum 4 Pins) With Simultaneous Drawer Locking System. Keys In Duplicate. 26 Paste Compressors In All Drawers. Printed Or Overlaid-Holder Holder, The Latter Being Exclusively Of Non-Ferrous Or Nickelled Metal Alloy. Drawers With Telescopic Rails Composed Of Linear Guides With Steel Ball Bearings, With A Minimum Vertical Load Capacity Of 45Kg And Exhaust Mechanism. Chrome Metal Levels Based On Injected Polypropylene. Painting In Epoxy / Polyester Hybrid Powder, Electrostatic, Shiny, Greenhouse Polymerized, Minimum Thickness Of 40 Micrometers In Gray. Borders Of The Top And Parts, Straight With Pvc 2, 0, 0/0, 5Mm Thick -Plasteplicatively In The Color And Standard Coating With Impact Resistance Etherically Stable, Glued To The Wooden Substrate By The Hot Melt Process. Fixing System Composed Of Turning Drum Turning Zamak 15 Mm Of Ø, Fast Moniting Screw M6 Metric Thread Emzamak And Plastic Polyethylene Finishing And 18 Mm Ø Ø. Drilling The Side Of The Side To Adjust The Shelves And Pin For Support With 5 Mm Of Ø Made Of Plastic Material. Zamak Steel Hinges With 270 Angle Opening, Involuntary Removal Protection And Height Adjustment (+ 2 Mm / - 2 Mm). Double -Sided Mock Cover Composed System, 180 ° Rotation, Body Cylinder 22 Mm Long, 17 Mm, Tabs For Fixing And Chrome Finish. Seesaw Type, Fixed Inside, Left Door, Upper Side And Lower Right. Type Type Steel Bar 5/16 Square Section, 330Mm Long And Pinossechers Made Of Ø Steel Tube And 5 Mm Height, With Epoxy Paint And Plain Finish And Fixed By M4 X 26Mm Metric Screws. Metallic Support Base. In Sae 1006 To 1008 Steel Tube, 30X50mm Rectangular Transverse Section, Used In The Upright Position, With 03Furos For Wiring Pass With Ø 35Mm, Located At The Back Of Q