Lot 1 - Charging Module For Cell Phones, Tablets And Notebooks With 13 Ports And Electronic Locks Carbon Steel Module, Mdf And Abs. Higher And Lower Closure In Abs, With 4 Mm Wall Structure (In Any Cross Cut), Having 6 Castles For Fixing The Rectangular Structure (25 X 25 Mm Tube) Use For The Union Between Plastic Base And Special Structure, Special Screws Plastic. The Module Has The 12 Vertices That Make Up Its Shape Of At Least 50 Mm, With No Dating And Edges With Live Corner. The Module Is Mounted With The Use Of Screws And Rivets. The Feet Of The Injected Plastic Module In The Same Color Of The Base And Headboard, With Semi -Spherical Shape And Diameter Of 70 Mm, 36, 5 Mm Height, 3, 5 Mm Thick Shoe Wall, Eight “Ribs” For Structuring, 45 ° Slope -Beveled Floor Edge And 4 Mm Height With 5/16 Central Screw That Allows Its Regulation. The Module Is Subdivided Into 13 Compartments, 12 For Storage And Charging, And A Compartment For Maintaining Electronic Electrical Equipment. In The Storage And Recharging Compartments Of Electronic Equipment, There Is A Three -Point Abnt Built -In And 10A And Two 5V 1A 1A Ports, Thus Allowing The Device To Recharge With The Usb Cable Only And Without Charger Use When The Compartment Is Opened Is Automatically Illuminated By White Led. The Module Has A Class I Grounding In Accordance With International Safety Standards. For The Safe Closure Of The Compartment, There Is A Digital Lock In Each Compartment With Individualized Password, The Same System Also Acts As A Compartment Door Handle. At The Bottom There Is A Compartment For The Accommodation And Maintenance Of Electrical/Electronics Composed Of Two Dps 45Ka Outbreak Protectors 175V Ip Cl2, Lot 1 - Storage Module, Transportation And Recharge For Netbooks And Tablets (Type Cartoon Type), With Capacity For Storage And Loading Up To 36 Notebooks. Carbon Steel Module, Mdf And Abs, Detachable In 8 Parts Being: 2 Sides, 1 Background, 1 Base, 1 Headboard, 2 Doors, 1 Dividing Shelf. Upper And Lower Closure In Abs, Special Plastic Screws, Has The 12 Vertices That Make Up Its Range Of At Least 50 Mm, Without Meetings And Edges. The Module Is Mounted Using Screws And Rivets. The Upper Closure Should Have A Rectangular Recess With A Depth Of 20 Mm, Coated With A 1 Mm Thick Rubberized Blanket To Contain The Equipment Securely Before Or After Loading Packaging. The Base Has 4 Cold Floors, With Pedal Lock System, Injected With Fiberglass Reinforced Nylon, With Steel Axles, 75 Mm Double Wheels, Injected Into Pvc, With A Capacity Of 60 Kg Each. Injected Polyurethane Tread. Axis Gifted With Metric Thread. Both Ways In Both Directions, Both In The Shooting And In The Turn, Through A Metallic Mechanism. Axes With M12 Thread System. Cabinet Body In Thick Steel Plate, 0, 75 Mm. Right And Left Sides Of The Closet, With Ventilation By Round Holes With A Diameter Of 10 Mm In A Minimum Of 184 Holes (23 Lines And 8 Columns Of Holes), Lot 1 - Low Storage Module, With 2 Doors And 1 Shelf (Carbon Steel, Mdf And Abs). Carbon Steel Module And Can Be Detachable In 8 Parts
