Bids Are Invited For Price Registration For Future And Eventual Acquisition Of Medical Equipment Intended For Cme, To Meet The Needs Of Health Care Establishments (Eas), Administered By The Sergipe Health Secretariat (Ses/Se)-(Proposals No. 04384.829000/1230-06, 04384.829000/1230-08, 04384.829000/1240-08)

Autoclave- Autoclave Electric Power Panel, 220V / 380V (Three-Phase), Rectangular Internal Chamber With A Minimum Capacity Of 300 Liters (+/- 5%), Built In Aisi-316L Stainless Steel, Cycles And Programming: Must Have Different Cycles Programming For Each Deposit Type With At Least 08 Programmable Cycle, Internal Chamber Should Be Warranty 10 Years And Doors Sealing Minimum 02 Years, Outer Chamber In Aisi 304 Or Higher Stainless Steel With Coating To Avoid Heat Loss And Heating Of The Workplace, Removal Of The Load Air Is A Fundamental Part Of The Process. Cycles Paratesto Bowie & Dick And Leak Test, The Equipment Chamber Must Be Seal Between The Environments Where The Sterilizer Will Be Anchored. Vacuum System: Through A Vacuum Pump, Autoclave - Electric Panel For Electric Power Connection, To Package And Lease The Warehouses; With Two Shelves Of Size Compatible With The Inner Chamber; 02 (Two) Units Of External Car With Rotation: For Movement Of The Loads Built In Stainless Steel 304, Cycles And Programming: Must Have Programming Of Different Cycles For Each Type Of Process With At Least 08 Cycropogramable Options. Cycles With Profile For Sterilization Of Textile Materials, Glassware, Metallic Instruments, Lumen Devices, Approximate Internal Chamber Dimensions (Lxaxp) 660 X 660 X 1250 Mm;, Must Have 02 (Two) Pneumatically Triggered Sliding Doors With Internal Face Built In Aisi 316L Stainless Steel, Emergency Button; Manovacuzerman Of The Internal Chamber; Hydrogen Peroxide Plasma (H2o2) Sterilizer - Automatic Horizontal Sterilizer For Low Temperature Sterilization By Hydrogen Peroxide Plasma With The Following Technical Features: Internal Chamber With A Minimum Capacity Of 300 Liters, Structure Should Be Built In Aisi 304 Stainless Steel Or Superior Quality. External Panels Should Be In Aisi 304 Ailioinox With Brushed Type Finish. Printer For Registration Of The Fundamental Sterilization Parameters, 220V Or 380V Three -Phase Voltage, With A 60 Hz Breach, Process Security Check And Repetability Of The Repeatability Of The Cycle In Time. Verification Of Temperature And Pressure During The Cycle, Follows All Accessories And Inputs Necessary For The Complete Use Of The Equipment, Registration In The Anvisa Of The Equipment And The Inputs, Authorized Technique, Hospital Washer - Thermode -In -Chamber Thermoder Washer For Use And Disinfection Of Dirty Reusable Utensils, Trays, Glass Items, Browse And Plastic Instruments Of Surgical Instruments Of Surgical Instruments Simple Rigid Surface (Such As Forceps And Staples) And Other Similar Items Found In Medical Assistance Structures, The Thermode-Infected Washing Should Be Manufactured With 304 Stainless Steel Chamber, Have Rounded Corners To Facilitate The Cleaning Process, The Sprout Arms Should Be Easily Assembled/Disassembled And It Is Possible To Access Them By The Washing Chamber, The Washing Chamber. Being 260L (+/- 5%) But With Capacity To Process At Least 8 Pattern Baskets Using 4 Level Rack, Should Also Have Open Cycles For Customized Programming, In Order, Hospital Rotary Dryer - Tracheal Dryer, At Least 32 Trachs, C