Bids Are Invited For Acquisition Of A New Tank With Capacity For 15,000 Liters, For Installation In Mercedes-Benz Truck, Atego 2730 K (6X4), According To Specifications In The Term Of Reference, Attached To The Notice.

A New Tank With A Capacity Of 15,000 Liters, Built In Elliptical Format, Astm To 36 3Mm Steel Wall, Double Sewn Electric Welds By The Mig Process, With Aws 5.18-79 Er 70 S And Din 8559 Weld Weld Wire. Fully In Mig Welding. Astm A36 Steel Bulge Plates Of 3, 00Mm Thick. Respirator And Extravasation Thief Of Tower Surplus Water, With 3 Inches In Diameter On The Tanks Mouth Lid. The Tank Should Have An Inspection And Water Inlet Of 400Mm Diameter Water, At The Top Of The Same Made Of 36 Of 36 Of 3, 00Mm Thick Steel For More Safety On The Route, Which Do Not Allow Excessive Hand Movement On The Route, Made Of 4, 00Mm Thick Steel Steel Plates. Tank Level Display 3/4 Transparent Crystal Hose. The Water Tank Should Be Completely Pronounced Until The Degree Of Minimum Preparation, Leaving White Metal Aspect, Where It Will Be Painted With Two Epoxy Primer, With A Thickness Of 100 Micro And Finishing With Two Coats Of Pu. In The Tank, Fixed By Special 5/8 Inches To The Truck Chassis. Cradle System Endowed With Cushion To Prevent Tank Torsion. Higher Metal Plane Built On Steel Sheet Steel Lq At 36 From 3, 00Mm Plaid Thickness (Floor) With A Sailor Ladder To Access The Tank Inspection, Manufactured In Industrial Tube 22, 2 Mm In Diameter. Rubberized Water Hose For 2-1/2 Inch High Strength. Complete Pump Pipe In Connection With Tank In A 3, 5Mm Thickness And Ø 2.1/2 Diameter Dim Tank And 2 Inch Tube 40 Of 4.00Mm Thickness And 2-1/2 Inch Brass Sphere Valves. Two (02) Storz Outputs For Eng, 04/29/2025