Tenders Are Invited For Street Simulators

Grebotical Trainer 1220 Mmshirin 864 Mmmosphere 824 Mmvuly Simulator Should Be Made With The Following Technical Characteristics: Metal Base (Frame), Lever System. The Simulator Frame Is Made Of A Pipe With A Diameter Of 60 Mm. The Levers Are Made Of Pipe With A Diameter Of 42.3 Mm, Handles From A Pipe With A Diameter Of 26.8 Mm. The Mortar Is Made Of Sheet Of At Least 8 Mm. Pvc Handles For Holding Hands; Pvc Footrests For Feet. The Seat Is Made Of 3 Mm Sheet And Laminated Plywood Or Plastic With A Thickness Of At Least 12 Mm. The Set Should Be A Rubber Cover Of 30 Mm Thick In The Amount Of Not Less Than 4M2., Air Walker 1036 Mmshirin 312 Mmmosphere 1472 Mm Street Simulator Should Be Made With The Following Technical Characteristics: Metal Base (Frame), Two Levers. The Simulator Frame Is Made Of Pipe Ø89*3, The Handrail Is Made Of Du25 Pipe. The Lever Is Made Of Du50 Pipe. The Canvas Of The Footrest Is Made Of Sheet Of 4 Mm Rifl. The Mortar Is Made Of Sheet Of At Least 8 Mm. The Set Should Be A Rubber Cover Of 30 Mm Thick In The Amount Of Not Less Than 4M2. The Simulator Should Allow The Exercises By Lifting Their Weight. Consideration Racks Of The Simulator Must Be Made Of A Metal Pipe With A Diameter Of Not Less Than 102 Mm And A Wall Thickness Of 3 Mm On A Metal Base With Holes For Attachment To A Mortar Thickness Of 8 Mm, Top Of The Rack Is Brewed With A Metal Circle. Other Elements Of The Structure Are Made Of A Round Metal Pipe With A Diameter Of 42.3 Mm, Sheet Metal With A Thickness Of 6 Mm And 4 Mm Thick, The Handles Made Of Pipe With A Diameter Of 26.8 Mm. The Back And Seat Of The Simulator Are Made Of Moisture Resistant Plywood Or Plastic With A Thickness Of At Least 12 Mm. The Set Should Be A Rubber Coating Of 30 Mm Thick In The Amount Of Not Less Than 4M2, The Emphasis For The Press - Brusidovzhyn 1510 Mmshryn 709 Mmmond 1553 Mm, The Double -Sided Simulator Has A Focus For The Press And Bars. The Simulator Allows You To Perform Exercises That Strengthen The Abdominal Muscles And Push -Ups On The Bars. It Belongs To The Class Of Simulators Installed In The Open Air. Two People Can Do On The Simulator At The Same Time. Structurally, The Simulator Consists Of A Fixed Frame, To Which The Bars Are Welded And Fastened With A Bolt Connection Of The Emphasis For The Press. The Stand Of The Simulator Is Made Of Pipes With A Diameter Of 102 Mm, Sheet Metal 6 Mm Thick, The Bottom Of The Pipe Is Welded To The Pipes With A Thickness Of 8 Mm, With The Help Of Which The Simulator Is Fastened To The Mortgage. Bars, Which Are Welded To The Racks Made Of A Pipe With A Diameter Of 42.3 Mm, The Emphasis For The Press Is Made From The Pipe With A Diameter Of 42.3 Mm And Sheet Metal With A Thickness Of 3 Mm. The Armrests And Back Folds Are Made Of Plastic Material With A Thickness Of 15 Mm Plastic Handles On The Emphasis For The Press Provide Comfortable Exercises. Included