Request For Quotation The Purchase Of Sanitary Equipment

Type Siphon Purpose For The Toilet The Number Of Bages 1 Connection Diameter 110 Mm Plastic, Type: Two -Seal Appointment: For The Kitchen (Sink) Coating: Chrome Design: Method Of Installation: Horizontal Number Of Mounting Holes: 1 Additionally: Color: Silver Corps Material: Silumin Dimensions: Height - 300 Mm, Length - 160 Complete With Eyeliners (Hoses) 2 Pieces Of At Least 80 Cm, The Main Characteristics Assign For A Shower The Type Is A Single -Grinding Drill Valve Ceramic Cartridge Chrome Coating The Degree Of Glossy Glossy Design The Installation Method Is Vertical The Number Of Mounting Holes2 The Type Of Eyeliner Is Hard Assembly Size1/2 Spout Design Without Pouring The Height Of The Mixer, Mm95 The Width Of The Mixer, Mm213 Additionally Watering Can, Wall Holder The Color Is Chrome Brass Body Material, The Button 1-Level Reinforcement Designed For Installation In Flush Tanks With Lateral Watering And With A Hole Of Ø40 Mm In The Lid. The Kit Includes: Filler Valve Kn 54.00.00 With A Plastic Fitting, Exhaust Valve Ac 105.00.00 With A Metallized Or Plastic Button, A Set Of Fasteners, Laying Between A Tank And A Toilet, An Installation Instruction. The Grate Is Made Of Stainless Steel, Siphon From Abs Plastic, Brass Ball Valves 20 X 0.1 Mm. The Handle Lever Of Aluminum, Internal Internal Thread (Bp - Bp); Pen “Butterfly” Of Aluminum, Internal Thread - Internal (Bp - Bp); The Handle Lever Of Aluminum, The Internal Thread Is The Outer (Bp - Hp); The Pen “Butterfly” Made Of Aluminum, The Internal Thread Is The Outer (Bp - Hp)., Lower Button 1-Level Reinforcement Designed For Installation In Flush Tanks With Side Water Eyed And With A Hole Of Ø40 Mm In The Lid. The Kit Includes: Filler Valve Kn 54.00.00 With A Plastic Fitting, Exhaust Valve Ac 105.00.00 With A Metallized Or Plastic Button, A Set Of Fasteners, Laying Between A Tank And A Toilet, An Installation Instruction. The Grate Is Made Of Stainless Steel, Siphon From Abs Plastic, Timing Mode Usual The Mechanism Of The Drain Is Mechanical Floor Installation Type Toilet The Material Of The Sanfarfor Corps The Release Of A Scythe Installation Of A Tank On The Toilet The Seat Is Included, Number 30 Tiphomut Worm Minimum Diameter 8.0 Mm Maximum Diameter 57.0 Mm Fixation Clamp, Type Of Threading (Bp/Hp) Assigned Water The Design Is Full -Pass Diameter Du 20 (3/4) Brass Body Material Management Handle Conditional Pressure Ru 40 The Temperature Is Minimal 20.0 ° C. Temperature Maximum150.0 ° C. Additional Information Brass Ball, Manufacturer Czech Republic Model/Manufacturers Article3/4 R/G/W, Type Of Accession Coupling (Bp/Bp) Assigned Water The Design Is Full -Pass Diameter Du 32 (1 1/4) Brass Body Material Management Of A Bow-Button, Knuckle-Knuckle Conditional Pressure Ru 16 The Temperature Is Minimal 20.0 ° C. Temperature Maximum150.0 ° C. Model/Article Of The Manufacturerr224, Type Of Threading (Bp/Hp) Water Purpose The Design Is Standard Diameter Du 25 (1) Brass Body Material Management Handle-Butterfly Conditioning Pressure Ru 30 The Temperature Is Minimal10.0 ° C. Temperature Maximum105.0 ° C. Model/Article Of The Manufacturerms.Bv.04.25, Brass Ball Valves 25 X 16 Mm, Type Of Threading (Bp/Hp) Water Purpose The Design Is Standard Diameter Du 15 (1/2) Building Material Chrome Brass Management Handle-Butterfly Conditional Pressure Ru 40 The Temperature Is Minimal10.0 ° C. Temperature Maximum90.0 ° C. Model/Article Of The Manufacturer9876