Request For Quotation Products And Materials (For Balkhash Zhylu Llp. Tel. 7103650352)

Wheel Working With A Diameter Of 250 Mm. For The Pump Bl 150/250-200-2; Mark Impeller 150/250-270-198/38 Gg20 Set/2208627 (For Llo Balkhash Zhyla Tel. 7103650352,), The Sleeve Is Rubber, With A Metal Spiral, A Pressure-Linked Village Of 100 Mm., Length 6.0 Meters. (For The Assanistor A/M Gaz-3307). Sleeves Pressure Suction Gost 5398-76 With A Textile Frame And A Metal Spiral That Have Soft Cuffs At The Ends To Join Their Reinforcement. They Are Used For Absorption And Bumping Of Various Liquids, Fuels, Oils On An Oil Basis And Gases. The Absorption Sleeve Consists Of Several Layers: Inner Rubber, One Or More Layers Of The Textile Frame And External Rubber. The Sleeve Consists Of Several Layers: Inner Rubber, One Or More Layers Of The Textile Frame And External From Rubber. Spear Of The Pressure Of The Suction (Pressure Parameters: Vacuum - 0.08 Mpa (0.8Atm), Pressure - 0.3; 0.5 And 1.0 Mpa (3; 5; And 1.0 Atm)) (For The Balkhash Llc Tel. 7103650352,)), Pneumoiser Oorko Rom-2 Kmn Pipe Vn-D 200-400 Mm. Complete With The Orko D9 Extensor-3 M Pun-000545. Designed For Drowning The Internal Cavity Of Pipelines Of Various Diameters During Emergency Measures, Repair Work On Water, Sewage And Heating Networks. They Are A Hollow Cylindrical Shell With Two Flat Bottoms, On One Of The Bottoms Of Which There Is A Valve To Fill The Shell With Compressed Air With A Bracket Or Earring Mounted On It, On The Other - There May Be A Eye For Fixing The Pneumatic Tanning In The Pipe When The Compressed Air From The Shell And The Water Gathering Accumulated During The Repair Process. The Valve, Bracket And Eye Are Made Of Steel With A Corrosion -Resistant Coating Or Stainless Steel (Depending On The Performance). They Are Replaced If There Is An Open End Part Of The Pipeline Or If It Is Possible To Cut The Operating Opening In The Pipe, Equal To The Overall Pneumatic Tan Size. The Open End Part Of The Pipeline Is Available On Sewer Networks In The Wells Of Service, Through Which The Pneumatic Bells Are Installed. (For Llp Balkhash Zhilu Tel. 7103650352,) Technical Characteristics Of Orko Rom-2 Kmn Pipe Vnd 200-400 Mm Type- Pneumatic Binder The Working Pressure Of Compressed Gas In The Shell-0.4 Mpa Working Range Of Ambient Temperature From -30 To +40 ° C Length- 650 Mm Diameter-200-400 Mm Rezinocorus Shell Material Field Of Application-Water Supply And Sewage Weight Netto-6.5 Kg, Air Piston Oil Compressor Of A Direct Drive (Coaxial) New Development, Has The Advantages Of A Compact Design, Attractive Design, A High Level Of Safety In Use. The Aurora Breeze-8 Compressor Is Equipped: A Regulator Of Pressure On The Output With A Safety Valve; Air Incoming Filter; Cooler Ventilator; Quick -Removable Connection Of Mom (Eurostardard); The Noise -Absorbing Casing Of The Electric Motor. Advantages Of Oil Compressors With Direct Drive: Simple And Reliable Design; Maintainability; Small Dimensions And Weight; The Optimal Value For Price And Quality (Quite High Performance At A Relatively Low Price). It Is Optimal To Use Piston Compressors In Cases Where Technologically There Is No Need For Continuous Air Supply. The Application Has Come On - In Everyday Life, In Small Workshops, Garages (For Pumping Tires, Muvils, Air Purges), In The Country, Etc., Everywhere, Convenient For Mobile Brigades. It Is Recommended To Connect The Spray Guns To The Compressor Aurora Breeze 8 Through Water-Oil Separators To Improve The Quality Of The Submarine. The Main Components Of The Pressure Relay. Regulators. Manometer F40. Manometer F50. Safety Valve. Clapar. Graduation Valve. Supports. Air Tank (Receiver) For 8 Liters. High Pressure Hose. Pump. Ventyllet Casing. The Oil Recommended For Use In The Compressor, Sae30 And L-Dab100 At A Temperature Above 10 ° C Or L-Dab68 At A Temperature Below 10 ° C. Packaging In A Hard Cardboard Box: Dimensions Of Packaging: 510 X 250 X 510 Mm. Warranty - 1 Year. (For Balkhash Zhilu Llp, Tel. 7103650352) User Characteristics Weight Gross 18.5 Kg Net-17 Kg Weight Packaging Dimensions- 510 X 260 X 512 Mm Maximum Pressure- 8 Bar Vacuum Electric Motor Power- 1.1 Kw Network Voltage -230 V The Volume Of The Receiver Is 8 L Oil Carter Volume 0.12 L Performance 155 L/Min Noise Level 94 Db Db The Number Of Drives Of The Drive Is 2850 Rpm, Bl150 Pump Shaft/250-200/2; Mark Shaft D.38/48/65X347.5-2 1.4021 Kit/2210684 (For Llo Balkhash Zhyla Tel. 7103650352,), Pneumo-Tanker Orko Rom-3 N Sun/D Pipe 380-600 Mm Valve Pn-000184 Valve Complete With An Orkoo D9 Adjacener-3 M Pun-000545. Designed For Drowning The Internal Cavity Of Pipelines Of Various Diameters During Emergency Measures, Repair Work On Water, Sewage And Heating Networks. They Are A Hollow Cylindrical Shell With Two Flat Bottoms, On One Of The Bottoms Of Which There Is A Valve To Fill The Shell With Compressed Air With A Bracket Or Earring Mounted On It, On The Other - There May Be A Eye For Fixing The Pneumatic Tanning In The Pipe When The Compressed Air From The Shell And The Water Gathering Accumulated During The Repair Process. The Valve, Bracket And Eye Are Made Of Steel With Corrosion -Resistant Coating Or Stainless Steel (Depending On Execution). They Are Used In The Presence Of An Open End Part Of The Pipeline Or If The Operational Hole Equal To The Dimensions Of The Pneumatic Tanker In The Pipe Is Possible In The Pipe. The Open End Part Of The Pipeline Is Available On Sewer Networks In The Wells Of Service, Through Which The Pneumatic Bells Are Installed. Technical Characteristics Orko Rom-3 N Pipe Vn/D 380-600 Mm Valve Fitting Type- Pneumatic Binder The Working Pressure Of Compressed Gas In The Shell-0.4 Mpa Working Range Of Ambient Temperature From -30 To +40 ° C Length-770 Mm Diameter-380-600 Mm Rezinocorus Shell Material Field Of Application Of Water Supply And Sewage Net-18 Kg Weight (For Llo Balkhash Zhilu Tel. 7103650352,)