Bids Are Invited For Steel Bunk Acquisition

Beliche Em Aço, Características Mínimas: Estrutura Principal Confeccionada Em Metalon Retangular (50 X 30) Mm De Chapa De Aço 14 Espessura Mínima 1, 90 Mm (Sae 1006-1020), Com 02 [Dois) Leitos, Estrado Confeccionado Em Aço Retangular, Com Cinco (05) Tubos De Aço Quadrado (20 X 20)Mm De Chapa De Aço 14 Espessura Mínima 1, Devendo Os Estrados Serem Soldados In The Stringers, Which Will Be Accompanied By A Minimum Thickness Of 18 Mm. Upper Bed With Protective Grid On The Right And Left Sides And Will Be Fixed On The Stringers By Screws, Nuts And Washers, With Square Tube Measuring (20 X 20) Mm With 14 Minimum Thick Sheet 1, With Spans Not More Than 0, 15M And With Measurements Of 1, 20 M Long X 0, 28M. Ladder Composed Of 02 Steps Fixed On The Side, Both Made Of Rectangular Metalon 30 X 20 Mm Of 14 14, 90 Mm (Sae 1006-1020) Thick Steel Plate. The Stringers Shall Be In Rectangular Metalon (100 X 30) Mm Of 14 Minimum Thick Steel Plate 1, 90 Mm (Sae 1006-1020). The Lower And Upper Ends Of The Main Support Structure Should Be Prohibited With 14 Minimum Thick Steel Plate -L, 90Mm (Sae 1006-1020) Welded; The Lower Ends (Feet) Should Be Provided With 100% Injected Black Polypropylene Shoes. Bunk Measurements: Width 0, 85 M X Length Of 1, 98 M X Height Of 1, 60 M (Variation Of +/- 1%). The Bunk Should Be Detachable Using Sets Of 03 (Three) Screws, 7/80 X 5/160 Steel Washers On Each Plate, To Unite The Stringers With The Headwaters, Totaling 24 Sets Of Bunk Assembly Screws. All Screws Of Screws, Nuts And Washers Should Be Made So That The Parts Are Protected, Avoiding Cuts, Scratches And Other Risks To Users. Structure Finish With High Resistance Mig Electronic Welding And Elimination Of Burrs And Splashes. All Metal Part Of The Material, After Individual Subconj Assembly, 24/04/2025