Bids Are Invited For Acquisition Of Hospital Equipment

(Id119407) Microprocessed Electronics Scalpel, Composition/Hardware Components: For Small Surgeries, Dermatological And Gynecological. Characteristics: Remote Control And Reducing Power Reduction In The Manual Control Pen Or By Front Panel Liquid Proof, Digital Display That Indicates The Real Power Level Of Maximum Power For Each Mode, With Alarm System In Case Of Plate Connection, With Electroceurgical Functions: Pure Cut 1, Blend 2, Blend 3, 3, Blend 3, Blend 3, Blend 4, Coagulation And Bipolar, Isolated Power Outputs, Including Metallic Box With Epoxy Po Electrostatic Painting, Food 110/220 Volts With Selector Switch, Potances: Pure Cut: 130 Watts, Blend 1: 90 Watts, Blend 2: 80 Watts, Blend 3: 70 Watts, Blend 4: 60 Watts, Coagulacation (Spray) 60 Watts, And Bipolar: 50 Watts. Accessories: 01 Simple Pen With Pedal Command, 01 Pen Pen Handle With Manual Command, 01 Patient Contact Stainless Stainless Plate, 01 Stainless Plate Connection Cable, 01 Fully Isolated Electrode Set Being: 01 Tip Ball Type, 01 Straight Knife Type, 01 Curved Knife, 01 Foco Type, 01 Long Step Ball 140 Mm, 01 Long Baionte 200 Mm, 01 Simple Pedal. The Equipment Must Come With A Operation Manual In Accordance With Ctc 1804 A95 Resolution, Record In The Health Ministry, Comply With Iec 601.2.2 And Inmetro Seal. Material In Resistant Material In Naval Abs, With Wheels, Internally Covered In Teflon With The Attached Equipment: 02 With Borden Fitting, 01 Triple Syringe, 01 Sucking Tip, 01 Sparkling Stool To C.D.Com Metal Back, Courvin Seat Dental, Dimensions: Height 62 Cm, Seat Dimensions: 28X28cm, Metal Structure, Metal Structure Chrome, 01 Portable Portable Reflector With Tripe And 56 Cm Flexible Rod, Chrome Rod Measures 48Cm, Closed Height 1, 18 Meters, Open Height Reaches Up To 1, 67 Meters And Lamp Of Cold White Leds With A Duration Of 2,000 Hours. 01 Portable Patient Dental Chair, Folding, With 05 Positions, Composed Of Seat, Front, Rear, Lumbar Support And Support For Pes, Supports Arms With Position Selector. It Has A Structure Built In Round Tubular Aluminum 7 /8´´´ X 1, 00Mm, With Carbon Tubular Soul Reinforcement 3 /4´´ With Wall 1, 2Mm In The Front, Rear And Backrest Pieces. Connection Between The Pieces By Through Pneumatically Conformed Zincaded Rivets. Structure With Anti -Corrosive Treatment, Backrest With Triangular Design At The Upper End, All Ends Of The Tubes Have Finish With Polypropylene Injected Pipes, Adherent Plastic Shoes In The Front And Rear, Pes Support Has Joint And Moves According To The Position Of Lumbar Support, Has Double Hinges In Aluminum. It Has 100 Percent Pvc Polyte Fabric Base Coated With White Soldier Pvc And Upper White Napa Upholstery Coating, Filled With Density Foam 23 With Upper And Lower Fitting Fixation And Tie Strap With Plastic Connector, Sewhed Finish. Accompanies: 01 Portable Compressor That Has 20 Liter Reservoir, Engine Power And 1, 5 Hp And Maximum Operation Pressure And 113 Lbf In, And Oil Free, Comes With Wheels And Transp Reach, (Id134147) Apical Locator, Application: Endodon