Tenders Are Invited For Partial Repairs Of Asphalt Roads Of Roads In The Commune Of Dłutów

1. The Subject Of The Contract Is The Implementation Of Road Repairs In The Commune Of Dłutów, Consisting Of: 1) Partial Renovation Of Bituminous Pavements And Made In Surface Consolidation Technology, At Depths Of About 5Cm Defects, By Performing Several Times Surface Consolidation Of The Surface With Asphalt Emulsion And Stone Grits - Estimated Amount Of Work Approx. 800 M2; 2) Bituminous Surfaces And Made In Surface Fixation Technology, In Places Of Cracks Of The Surface, By Performing A Single Surface Consolidation Of The Surface With Asphalt Emulsion And Stone Grits - An Estimated Amount Of Work Approx. 6000 M2. Working Of Works: 1) Preparation Of The Surface For Repair:  Removal Of Loose Surfaces,  Water Removal Leading The Damaged Place. Air -Gray,  Thorough Cleaning Of The Dna And The Edge Of The Damaged Place Of Loose Grains, Gravel, Sand And Dust, 2) Repair Of A Damaged Place, I.E. Filling The Damaged Surface Of The Surface With A 6.3 Mm Basalt Grits Out Of Basalt Grits - 10 Mm, In The Amount Of 16 - 30 Kg M2 And Emulsion Under Pressure; 3) Layer Basalt Grits, Respectively 2/4 Or 4/6.3 Mm In An Amount Of 8-12 Kg/M2. The Complication, For Partial Repairs Of Asphalt Surfaces Of Municipal Roads, Should Be Cleaned. The Surface Of The Substrate Should Be Dry And Clean. Each Arranged Layer Should Be Drizzled With An Asphalt Emulsion To Ensure An Appropriate Connection Between The Layered, In The Amount Determined In Knr 2-31, Tabl. 1002 Item 01 And 02. The Condensation Should Be Made In Advance, At The Time Intended For The Evaporation Of Water Or The Leaf Of The Liquefaction. During The Implementation Of The Works, The Following Measurements And Tests Should Be Performed:  Width Of The Layer;  Equality Of The Layer;  Transverse Declines;  Thickness Of Individual Layers;  Appearance Of The Layer (The Appearance Of The Layer (Should Have A Uniform Structure);  Thickening); Layers;  Removal Of Unrelated Aggregate. Materials That Should Be Used For The Implementation Of The Subject Of The Contract:  Basalt Grade Grades I-Should Meet The Requirements Of The Pn-En 13043 Standard. Renovations Should Be Used For Aggregate With Narrow Granulation Fractions 2-5/5-8/4-6.3 And 6.3-10; 65% Asphalt In Accordance With Pn-En 13808.2. The Unit Of Work Measure Is 1 M2 Of Repaired Surface, With An Accuracy To Two Decimal Places. 3. In Accordance With The Specification Of The Terms Of The Contract And The Needs Of The Ordering Party, The Contractor, By Accepting The Subject Of The Contract, Undertakes To: 1) The Execution Of Works In Accordance With The Specification Of The Terms Of The Contract, The Contract, The Submitted Offer And In Accordance With The Construction Of The Construction, Legal Provisions And The Principles Of Technical Knowledge, 2) Perform All Necessary Preparatory Works, Accompanying And Securing The Subject Of The Contract And Resulting From The Contractual Scope Of The Contract, 3) Informing The Ordering Party About The Date Of