Tenders Are Invited For Modernization Of Room 219 With Adaptation For People With Disabilities In The Wiśiim Building At Ul. Piątkowska 94 In Poznań

The Subject Of The Contract Is The Modernization Of Room 219 Together With Adaptation For People With Disabilities In The Building At 94 Piątkowska Street. The Scope Of Work As Part Of The Task Includes: • Liquidation Of The Old Floor • Preparation Of The Ground And Laying A New Floor From The Tarkett Rulon Floor Covering. Teletechnical1. The Contractor In The Electrical And Teletechnical Taken Will Be Obliged To Mount A Cable Strip To Cable Accessories In Accordance With 45X45 Modules. 230V Electrical Sockets Will Be Installed In The Slats, Double In A Number In Accordance With The Attached Attachment. 3 Pel Points Should Be Installed In The Room. The Pel Point Is An Electrical And Logical Point Consisting Of 3 Cat 6A Computer Network Sockets And 4 Electrical Network Sockets. Above The Suspended Ceiling, 2 Cat 6A Single Sockets For The Wifi Network Should Be Installed. The Contractors Tasks Will Include The Removal Of All Ethernet Cables To The Computer Wardrobe In Accordance With The Direction Indicated In The Figure To The Room At The End Of The Communication Route. The Twisted Pair Should Be Carried Out Above The Ceiling, Attached And Secured. In The Room To Which Computer Twisted Pats Should Be Brought In The Distribution Wardrobe, A New Category 6A Patchpanel Should Be Installed. After Completing The Computer Network Installation, The Contractor Must Provide The Protocol Along With The Descriptions Of The Sockets Ensuring The Correctness Of The Connection And Ensuring The Transmission Speed In Accordance With The Standard For Cat6a Wiring. 2. In The Ceiling Part, The Contractor Must Mount 17 Pieces Of Luminaires Intended For Suspended Ceilings With Light Performance Of Luminaires Not Worse Than 125Lm/W. The Contractor Is Obliged To Absolutely Assemble The Clamps Connecting The Ok-K 45 Strips To Ensure Stability And Safety Of The Mounted Electrical Accessories. The Buckles Must Be In Front Of And Behind The Sockets Mounted In The Strip. All Electrical Circuits Should Be Brought To A New Electrical Switchgear, Which The Contractor Must Be Made In A Place Marked In The Figure As Rg. The Switchgear Should Be Secured In Accordance With Applicable Construction Law, Standards And Other Documents Legally Regulating Safety During The Use Of Electrical Devices. In The Switchgear, Mount The Main Switch, Super -Current, Residual, Surge Protection. All Nests Should Be Described, Measures To Be Made In Accordance With Construction Law. Replace The Lighting Fasteners. 3. The Projector And Electric Screen Should Be Removed From The Ceiling During The Renovation. After Assembly Of The Ceiling, Install And Set In The Projector Axis. The Hdmi Cable Should Be Brought To The Pel Designated Place Near The Leading Place. Install The Electric Screen. 4. In Ventilation Chimneys, Old Fans Should Be Dismantled And Utilized, And In Their Place New Silent Fans With Low Noise Levels When Working In Accordance With The Permissible Sound Level In Rooms Intended For People